Re: [RFC PATCH 12/14] cxl: Add basic debugging

From: Dan Williams
Date: Tue Dec 08 2020 - 20:18:44 EST


On Tue, Dec 8, 2020 at 4:24 PM Ben Widawsky <ben.widawsky@xxxxxxxxx> wrote:
>
> Provide a standard debug function for use throughout the driver.
>
> Signed-off-by: Ben Widawsky <ben.widawsky@xxxxxxxxx>
> ---
> drivers/cxl/cxl.h | 3 +++
> drivers/cxl/mem.c | 26 +++++++++++++++++++++++++-
> 2 files changed, 28 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h
> index 77c2dee6843c..e5afb89dab0b 100644
> --- a/drivers/cxl/cxl.h
> +++ b/drivers/cxl/cxl.h
> @@ -9,6 +9,9 @@
> #include <linux/bitops.h>
> #include <linux/io.h>
>
> +#define cxl_debug(fmt, ...) \
> + pr_debug("CXL DEBUG: %s: " fmt, __func__, ##__VA_ARGS__)
> +

This should be dev_dbg(), then you don't need the CXL DEBUG prefix. In
fact you don't need a cxl_debug() macro at all in that case. cxl_mem
might need a ->dev attribute for this purpose.

> #define CXL_SET_FIELD(value, field) \
> ({ \
> WARN_ON(!FIELD_FIT(field##_MASK, value)); \
> diff --git a/drivers/cxl/mem.c b/drivers/cxl/mem.c
> index a2cea7ac7cc6..6b2f8d3776b5 100644
> --- a/drivers/cxl/mem.c
> +++ b/drivers/cxl/mem.c
> @@ -122,9 +122,12 @@ static int cxl_mem_wait_for_doorbell(struct cxl_mem *cxlm)
> {
> const int timeout = msecs_to_jiffies(2000);
> const unsigned long start = jiffies;
> + unsigned long end = start;
>
> while (cxl_doorbell_busy(cxlm)) {
> - if (time_after(jiffies, start + timeout)) {
> + end = jiffies;
> +
> + if (time_after(end, start + timeout)) {
> /* Check again in case preempted before timeout test */
> if (!cxl_doorbell_busy(cxlm))
> break;
> @@ -133,6 +136,8 @@ static int cxl_mem_wait_for_doorbell(struct cxl_mem *cxlm)
> cpu_relax();
> }
>
> + cxl_debug("Doorbell wait took %dms",
> + jiffies_to_msecs(end) - jiffies_to_msecs(start));
> return 0;
> }
>
> @@ -180,6 +185,8 @@ static int cxl_mem_mbox_send_cmd(struct cxl_mem *cxlm,
> }
>
> /* #4 */
> + cxl_debug("Sending command to %s\n",
> + dev_driver_string(&cxlm->pdev->dev));

dev_dbg() already includes dev_driver_string().

> cxl_write_mbox_reg32(cxlm, CXLDEV_MB_CTRL_OFFSET,
> CXLDEV_MB_CTRL_DOORBELL);
>
> @@ -308,6 +315,8 @@ static int cxl_mem_open(struct inode *inode, struct file *file)
> if (!cxlmd)
> return -ENXIO;
>
> + cxl_debug("Opened %pD\n", file);
> +
> file->private_data = cxlmd;
>
> return 0;
> @@ -383,6 +392,10 @@ static int handle_mailbox_cmd_from_user(struct cxl_memdev *cxlmd,
> .size_in = cmd->info.size_in,
> .size_out = size_out,
> };
> + cxl_debug("Submitting command for user\n"
> + "\topcode: %x\n"
> + "\tsize: %zub/%zub\n",
> + mbox_cmd.opcode, mbox_cmd.size_in, mbox_cmd.size_out);
> rc = cxl_mem_mbox_send_cmd(cxlmd->cxlm, &mbox_cmd);
> cxl_mem_mbox_put(cxlmd->cxlm);
> if (rc)
> @@ -479,6 +492,8 @@ static long cxl_mem_ioctl(struct file *file, unsigned int cmd, unsigned long arg
> u32 n_commands;
> int i, j;
>
> + cxl_debug("Query IOCTL\n");
> +
> if (get_user(n_commands, (u32 __user *)arg))
> return -EFAULT;
>
> @@ -511,6 +526,8 @@ static long cxl_mem_ioctl(struct file *file, unsigned int cmd, unsigned long arg
> struct cxl_mem_command c;
> int rc;
>
> + cxl_debug("Send IOCTL\n");
> +
> rc = cxl_validate_cmd_from_user(u, &c);
> if (rc)
> return rc;
> @@ -843,6 +860,13 @@ static int cxl_mem_identify(struct cxl_mem *cxlm)
>
> id = (struct cxl_mbox_identify *)mbox_cmd.payload;
>
> + cxl_debug("Driver identify command\n"
> + "\tFirmware Version: %s\n"
> + "\tTotal Capacity: %llu (%llu persistent)\n"
> + "\tLSA size: %u\n",
> + id->fw_revision, id->total_capacity, id->persistent_capacity,
> + id->lsa_size);
> +

Seems not necessary for details that are published in sysfs?