Re: [PATCH v2 1/1] ARM: dts: mmp2-olpc-xo-1-75: clear the warnings when make dtbs

From: Arnd Bergmann
Date: Tue Dec 08 2020 - 08:59:57 EST


On Mon, Dec 7, 2020 at 9:47 AM Zhen Lei <thunder.leizhen@xxxxxxxxxx> wrote:
>
> The check_spi_bus_bridge() in scripts/dtc/checks.c requires that the node
> have "spi-slave" property must with "#address-cells = <0>" and
> "#size-cells = <0>". But currently both "#address-cells" and "#size-cells"
> properties are deleted, the corresponding default values are 2 and 1. As a
> result, the check fails and below warnings is displayed.
>
> arch/arm/boot/dts/mmp2.dtsi:472.23-480.6: Warning (spi_bus_bridge): \
> /soc/apb@d4000000/spi@d4037000: incorrect #address-cells for SPI bus
> also defined at arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts:225.7-237.3
> arch/arm/boot/dts/mmp2.dtsi:472.23-480.6: Warning (spi_bus_bridge): \
> /soc/apb@d4000000/spi@d4037000: incorrect #size-cells for SPI bus
> also defined at arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts:225.7-237.3
> arch/arm/boot/dts/mmp2-olpc-xo-1-75.dtb: Warning (spi_bus_reg): \
> Failed prerequisite 'spi_bus_bridge'
>
> Because the value of "#size-cells" is already defined as zero in the node
> "ssp3: spi@d4037000" in arch/arm/boot/dts/mmp2.dtsi. So we only need to
> explicitly add "#address-cells = <0>" and keep "#size-cells" no change.
>
> Signed-off-by: Zhen Lei <thunder.leizhen@xxxxxxxxxx>

Right, I already sent the same patch earlier.

Lubomir, can I apply this to the fixes branch?

> arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts
> index adde62d6fce73b9..82da44dacba7172 100644
> --- a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts
> +++ b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts
> @@ -224,7 +224,7 @@
>
> &ssp3 {
> /delete-property/ #address-cells;
> - /delete-property/ #size-cells;
> + #address-cells = <0>;
> spi-slave;
> status = "okay";
> ready-gpios = <&gpio 125 GPIO_ACTIVE_HIGH>;
> --
> 1.8.3
>
>