Re: [PATCH] arm64: dts: imx8mn: Fix duplicate node name

From: S.j. Wang
Date: Tue Dec 08 2020 - 03:45:45 EST


> > > >
> > > > On Mon, Dec 07, 2020 at 02:21:40PM +0100, Krzysztof Kozlowski wrote:
> > > > > On Mon, Dec 07, 2020 at 02:53:24PM +0800, Shengjiu Wang wrote:
> > > > > > Error log:
> > > > > > sysfs: cannot create duplicate filename
> > > > '/bus/platform/devices/30000000.bus'
> > > > > >
> > > > > > The spba bus name is duplicate with aips bus name.
> > > > > > Refine spba bus name to fix this issue.
> > > > > >
> > > > > > Fixes: 970406eaef3a ("arm64: dts: imx8mn: Enable Asynchronous
> > > > > > Sample Rate Converter")
> > > > > > Signed-off-by: Shengjiu Wang <shengjiu.wang@xxxxxxx>
> > > > > > ---
> > > > > > arch/arm64/boot/dts/freescale/imx8mn.dtsi | 2 +-
> > > > > > 1 file changed, 1 insertion(+), 1 deletion(-)
> > > > > >
> > > > > > diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> > > > > > b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> > > > > > index fd669c0f3fe5..30762eb4f0a7 100644
> > > > > > --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> > > > > > +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> > > > > > @@ -246,7 +246,7 @@ aips1: bus@30000000 {
> > > > > > #size-cells = <1>;
> > > > > > ranges;
> > > > > >
> > > > > > - spba: bus@30000000 {
> > > > > > + spba: spba-bus@30000000 {
> > > > >
> > > > > The proper node name is "bus" so basically you introduce wrong
> > > > > name to other problem. Introducing wrong names at least requires a
> comment.
> > > >
> > > > I just noticed that my message was barely understandable... so let me
> fix it:
> > > >
> > > > The proper node name is "bus" so basically you introduce wrong
> > > > name to _fix_ other problem. Introducing wrong names at least
> requires a comment.
> > > >
> > > > > However the actual problem here is not in node names but in
> addresses:
> > > > >
> > > > > aips1: bus@30000000 {
> > > > > spba: bus@30000000 {
> > > > >
> > > > > You have to devices with the same unit address. How do you share
> > > > > the address space?
> > > > >
> > > > > I think this should be rather fixed.
> > > >
> > > > And again, hungry keyboard ate a letter, so:
> > > >
> > > > You have _two_ devices with the same unit address. How do you
> > > > share the address space?
> > > > I think this should be rather fixed.
> > > >
> > >
> > > spba is the first block of aips1 space, so it has same start address
> > > as aips1.
> >
> > The reference manual describes it "Reserved for SDMA2 internal
> > memory", so indeed it is first address but does it have to be mapped?
> > Anyway, why don't you use ranges to remove the conflict?
>
> The IO address space remapping could be a solution but there is another
> problem - the hardware representation in DT does not match what reference
> manual is saying.
>
> The AIPS bus @30000000 has several IPs:
> - SAI2@30020000
> - ...
> - GPIO1@30200000
>
> However in DTS you will find additional SPBA bus for 30000000 - 300c0000.
> It's not really the SDMA, as SDMA is at different address. It is rather an
> address space which SDMA should map... but it is not a bus with children.
> Adding spba-bus@30000000 with its children does not look like correct
> representation of HW in DTS.
>

In the RM, it says AIPS-1 (s_b_1, via SPBA) Glob. Module Enable.
Range is (30000000 - 300FFFFF)

SPBA is a sub-bus under AIPS1. The SAI2@30020000 - ASRC@300c0000
Are the devices under SPBA bus.

So it doesn't violate RM.

Best regards
Wang shengjiu