Re: [PATCH V5 5/5] PCI: tegra: Disable LTSSM during L2 entry

From: Vidya Sagar
Date: Tue Dec 08 2020 - 01:15:32 EST




On 12/8/2020 2:07 AM, Bjorn Helgaas wrote:
External email: Use caution opening links or attachments


[+cc Jingoo, Gustavo]

On Thu, Dec 03, 2020 at 07:04:51PM +0530, Vidya Sagar wrote:
PCIe cards like Marvell SATA controller and some of the Samsung NVMe
drives don't support taking the link to L2 state. When the link doesn't
go to L2 state, Tegra194 requires the LTSSM to be disabled to allow PHY
to start the next link up process cleanly during suspend/resume sequence.
Failing to disable LTSSM results in the PCIe link not coming up in the
next resume cycle.

Is this a Tegra194-specific issue, or will other DWC-based controllers
need a similar change?
This is a Tegra194 specific issue.

Thanks,
Vidya Sagar

Tested-by: Thierry Reding <treding@xxxxxxxxxx>
Signed-off-by: Vidya Sagar <vidyas@xxxxxxxxxx>
Acked-by: Thierry Reding <treding@xxxxxxxxxx>
---
V5:
* Added Tested-by and Acked-by from Thierry Reding

V4:
* New patch in this series

drivers/pci/controller/dwc/pcie-tegra194.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index f4109d71f20b..5597b2a49598 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -1506,6 +1506,14 @@ static void tegra_pcie_dw_pme_turnoff(struct tegra_pcie_dw *pcie)
data &= ~APPL_PINMUX_PEX_RST;
appl_writel(pcie, data, APPL_PINMUX);

+ /*
+ * Some cards do not go to detect state even after de-asserting
+ * PERST#. So, de-assert LTSSM to bring link to detect state.
+ */
+ data = readl(pcie->appl_base + APPL_CTRL);
+ data &= ~APPL_CTRL_LTSSM_EN;
+ writel(data, pcie->appl_base + APPL_CTRL);
+
err = readl_poll_timeout_atomic(pcie->appl_base + APPL_DEBUG,
data,
((data &
@@ -1513,14 +1521,8 @@ static void tegra_pcie_dw_pme_turnoff(struct tegra_pcie_dw *pcie)
APPL_DEBUG_LTSSM_STATE_SHIFT) ==
LTSSM_STATE_PRE_DETECT,
1, LTSSM_TIMEOUT);
- if (err) {
+ if (err)
dev_info(pcie->dev, "Link didn't go to detect state\n");
- } else {
- /* Disable LTSSM after link is in detect state */
- data = appl_readl(pcie, APPL_CTRL);
- data &= ~APPL_CTRL_LTSSM_EN;
- appl_writel(pcie, data, APPL_CTRL);
- }
}
/*
* DBI registers may not be accessible after this as PLL-E would be
--
2.17.1