Re: [PATCH 2/3] usb: dwc2: enable FS/LS PHY clock select on STM32MP15 FS OTG

[Minas Harutyunyan]

On 11/23/2020 1:01 PM, Amelie Delaunay wrote:
> When the core is in FS host mode, using the FS transceiver, and a Low-Speed
> device is connected, transceiver clock is 6Mhz.
> So, to support Low-Speed devices, enable support of FS/LS Low Power mode,
> so that the PHY supplies a 6 MHz clock during Low-Speed mode.
> 
> Signed-off-by: Amelie Delaunay <amelie.delaunay@xxxxxx>

Acked-by: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx>

> ---
>   drivers/usb/dwc2/params.c | 2 ++
>   1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c
> index 0df693319f0a..9e5dd7f3f2f6 100644
> --- a/drivers/usb/dwc2/params.c
> +++ b/drivers/usb/dwc2/params.c
> @@ -179,6 +179,8 @@ static void dwc2_set_stm32mp15_fsotg_params(struct dwc2_hsotg *hsotg)
>   	p->activate_stm_id_vb_detection = true;
>   	p->ahbcfg = GAHBCFG_HBSTLEN_INCR16 << GAHBCFG_HBSTLEN_SHIFT;
>   	p->power_down = DWC2_POWER_DOWN_PARAM_NONE;
> +	p->host_support_fs_ls_low_power = true;
> +	p->host_ls_low_power_phy_clk = true;
>   }
>   
>   static void dwc2_set_stm32mp15_hsotg_params(struct dwc2_hsotg *hsotg)
>