Re: [PATCH v2 01/11] iio: adc: at91_adc: remove platform data

From: Alexandre Belloni
Date: Sat Nov 28 2020 - 17:08:07 EST


Hi,

On 28/11/2020 14:04:27+0000, Jonathan Cameron wrote:
> On Tue, 17 Nov 2020 15:06:46 +0100
> Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx> wrote:
>
> > The at91 platforms have been DT only for a while, remove platform data.
> >
> > Signed-off-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
> > Reviewed-by: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx>
>
> Hi Alexandre,
>
> I'd completely forgotten that we actually had a similar patch that
> is already applied from Alexandru back in September.
>

I actually have seen that yesterday too. I even reviewed them...

> Given vast majority matched, I've just changed your patch into one
> that drops the id_table (which Alexandru didn't do).
>
> So with that tweak applied to the togreg branch of iio.git.
>

Ok, thanks, I guess you didn't push yet, I wanted to check and I didn't
find the patches on kernel.org.



> Thanks,
>
> Jonathan
>
> > ---
> > drivers/iio/adc/at91_adc.c | 80 +++++++-------------------
> > include/linux/platform_data/at91_adc.h | 49 ----------------
> > 2 files changed, 22 insertions(+), 107 deletions(-)
> > delete mode 100644 include/linux/platform_data/at91_adc.h
> >
> > diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
> > index 9b2c548fae95..62bd35af8b13 100644
> > --- a/drivers/iio/adc/at91_adc.c
> > +++ b/drivers/iio/adc/at91_adc.c
> > @@ -22,8 +22,6 @@
> > #include <linux/slab.h>
> > #include <linux/wait.h>
> >
> > -#include <linux/platform_data/at91_adc.h>
> > -
> > #include <linux/iio/iio.h>
> > #include <linux/iio/buffer.h>
> > #include <linux/iio/trigger.h>
> > @@ -153,6 +151,25 @@
> > #define TOUCH_SHTIM 0xa
> > #define TOUCH_SCTIM_US 10 /* 10us for the Touchscreen Switches Closure Time */
> >
> > +enum atmel_adc_ts_type {
> > + ATMEL_ADC_TOUCHSCREEN_NONE = 0,
> > + ATMEL_ADC_TOUCHSCREEN_4WIRE = 4,
> > + ATMEL_ADC_TOUCHSCREEN_5WIRE = 5,
> > +};
> > +
> > +/**
> > + * struct at91_adc_trigger - description of triggers
> > + * @name: name of the trigger advertised to the user
> > + * @value: value to set in the ADC's trigger setup register
> > + * to enable the trigger
> > + * @is_external: Does the trigger rely on an external pin?
> > + */
> > +struct at91_adc_trigger {
> > + const char *name;
> > + u8 value;
> > + bool is_external;
> > +};
> > +
> > /**
> > * struct at91_adc_reg_desc - Various informations relative to registers
> > * @channel_base: Base offset for the channel data registers
> > @@ -875,9 +892,6 @@ static int at91_adc_probe_dt(struct iio_dev *idev,
> > int i = 0, ret;
> > u32 prop;
> >
> > - if (!node)
> > - return -EINVAL;
> > -
> > st->caps = (struct at91_adc_caps *)
> > of_match_device(at91_adc_dt_ids, &pdev->dev)->data;
> >
> > @@ -960,30 +974,6 @@ static int at91_adc_probe_dt(struct iio_dev *idev,
> > return ret;
> > }
> >
> > -static int at91_adc_probe_pdata(struct at91_adc_state *st,
> > - struct platform_device *pdev)
> > -{
> > - struct at91_adc_data *pdata = pdev->dev.platform_data;
> > -
> > - if (!pdata)
> > - return -EINVAL;
> > -
> > - st->caps = (struct at91_adc_caps *)
> > - platform_get_device_id(pdev)->driver_data;
> > -
> > - st->use_external = pdata->use_external_triggers;
> > - st->vref_mv = pdata->vref;
> > - st->channels_mask = pdata->channels_used;
> > - st->num_channels = st->caps->num_channels;
> > - st->startup_time = pdata->startup_time;
> > - st->trigger_number = pdata->trigger_number;
> > - st->trigger_list = pdata->trigger_list;
> > - st->registers = &st->caps->registers;
> > - st->touchscreen_type = pdata->touchscreen_type;
> > -
> > - return 0;
> > -}
> > -
> > static const struct iio_info at91_adc_info = {
> > .read_raw = &at91_adc_read_raw,
> > };
> > @@ -1160,15 +1150,9 @@ static int at91_adc_probe(struct platform_device *pdev)
> >
> > st = iio_priv(idev);
> >
> > - if (pdev->dev.of_node)
> > - ret = at91_adc_probe_dt(idev, pdev);
> > - else
> > - ret = at91_adc_probe_pdata(st, pdev);
> > -
> > - if (ret) {
> > - dev_err(&pdev->dev, "No platform data available.\n");
> > - return -EINVAL;
> > - }
> > + ret = at91_adc_probe_dt(idev, pdev);
> > + if (ret)
> > + return ret;
> >
> > platform_set_drvdata(pdev, idev);
> >
> > @@ -1444,29 +1428,9 @@ static const struct of_device_id at91_adc_dt_ids[] = {
> > };
> > MODULE_DEVICE_TABLE(of, at91_adc_dt_ids);
> >
> > -static const struct platform_device_id at91_adc_ids[] = {
> > - {
> > - .name = "at91sam9260-adc",
> > - .driver_data = (unsigned long)&at91sam9260_caps,
> > - }, {
> > - .name = "at91sam9rl-adc",
> > - .driver_data = (unsigned long)&at91sam9rl_caps,
> > - }, {
> > - .name = "at91sam9g45-adc",
> > - .driver_data = (unsigned long)&at91sam9g45_caps,
> > - }, {
> > - .name = "at91sam9x5-adc",
> > - .driver_data = (unsigned long)&at91sam9x5_caps,
> > - }, {
> > - /* terminator */
> > - }
> > -};
> > -MODULE_DEVICE_TABLE(platform, at91_adc_ids);
> > -
> > static struct platform_driver at91_adc_driver = {
> > .probe = at91_adc_probe,
> > .remove = at91_adc_remove,
> > - .id_table = at91_adc_ids,
> > .driver = {
> > .name = DRIVER_NAME,
> > .of_match_table = of_match_ptr(at91_adc_dt_ids),
> > diff --git a/include/linux/platform_data/at91_adc.h b/include/linux/platform_data/at91_adc.h
> > deleted file mode 100644
> > index f20eaeb827ce..000000000000
> > --- a/include/linux/platform_data/at91_adc.h
> > +++ /dev/null
> > @@ -1,49 +0,0 @@
> > -/* SPDX-License-Identifier: GPL-2.0-or-later */
> > -/*
> > - * Copyright (C) 2011 Free Electrons
> > - */
> > -
> > -#ifndef _AT91_ADC_H_
> > -#define _AT91_ADC_H_
> > -
> > -enum atmel_adc_ts_type {
> > - ATMEL_ADC_TOUCHSCREEN_NONE = 0,
> > - ATMEL_ADC_TOUCHSCREEN_4WIRE = 4,
> > - ATMEL_ADC_TOUCHSCREEN_5WIRE = 5,
> > -};
> > -
> > -/**
> > - * struct at91_adc_trigger - description of triggers
> > - * @name: name of the trigger advertised to the user
> > - * @value: value to set in the ADC's trigger setup register
> > - to enable the trigger
> > - * @is_external: Does the trigger rely on an external pin?
> > - */
> > -struct at91_adc_trigger {
> > - const char *name;
> > - u8 value;
> > - bool is_external;
> > -};
> > -
> > -/**
> > - * struct at91_adc_data - platform data for ADC driver
> > - * @channels_used: channels in use on the board as a bitmask
> > - * @startup_time: startup time of the ADC in microseconds
> > - * @trigger_list: Triggers available in the ADC
> > - * @trigger_number: Number of triggers available in the ADC
> > - * @use_external_triggers: does the board has external triggers availables
> > - * @vref: Reference voltage for the ADC in millivolts
> > - * @touchscreen_type: If a touchscreen is connected, its type (4 or 5 wires)
> > - */
> > -struct at91_adc_data {
> > - unsigned long channels_used;
> > - u8 startup_time;
> > - struct at91_adc_trigger *trigger_list;
> > - u8 trigger_number;
> > - bool use_external_triggers;
> > - u16 vref;
> > - enum atmel_adc_ts_type touchscreen_type;
> > -};
> > -
> > -extern void __init at91_add_device_adc(struct at91_adc_data *data);
> > -#endif
>

--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com