Re: [RFC 0/4] net: l2switch: Provide support for L2 switch on i.MX28 SoC

[Lukasz Majewski]

Hi Andrew,

> > (A side question - DSA uses switchdev, so when one shall use
> > switchdev standalone?)  
> 
> DSA gives you a framework for an Ethernet switch connected to a host
> via Ethernet for the data plane. Generally, that Ethernet link to the
> switch is a MAC to MAC connection. It can be PHY to PHY. But those are
> just details. The important thing is you use an Ethernet driver on the
> host.
> 
> If you look at pure switchdev devices, they generally DMA frames
> directly into the switch. There is either one DMA queue per switch
> port, or there is a way to multiplex frames over one DMA queue,
> generally by additional fields in the buffer descriptor.
> 
> For this device, at the moment, it is hard to say which is the best
> fit. A lot will depend on how the FEC driver works, if you can reuse
> it, while still having the degree of control you need over the DMA
> channel. If you can reuse the FEC driver, then a DSA driver might
> work. If the coupling it too loose, and you have to take control of
> the DMA, then a pure switchdev driver seems more appropriate.
> 
>     Andrew
> 

Thanks for the detailed explanation.


Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@xxxxxxx

Attachment: pgpxzGVtFqY53.pgp
Description: OpenPGP digital signature