Re: [PATCH net-next 3/3] nfc: s3fwrn5: extract the common phy blocks

From: Bongsu Jeon
Date: Thu Nov 26 2020 - 18:10:16 EST

Next message: Sakari Ailus: "Re: [PATCH v2 2/2] media: dt-bindings: media: i2c: Add IMX300 CMOS sensor binding"
Previous message: Dexuan Cui: "RE: kdump always hangs in rcu_barrier() -> wait_for_completion()"
In reply to: Krzysztof Kozlowski: "Re: [PATCH net-next 3/3] nfc: s3fwrn5: extract the common phy blocks"
Next in thread: Krzysztof Kozlowski: "Re: [PATCH net-next 3/3] nfc: s3fwrn5: extract the common phy blocks"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Fri, Nov 27, 2020 at 2:13 AM Krzysztof Kozlowski <krzk@xxxxxxxxxx> wrote:
>
> On Fri, Nov 27, 2020 at 12:33:39AM +0900, bongsu.jeon2@xxxxxxxxx wrote:
> > From: Bongsu Jeon <bongsu.jeon@xxxxxxxxxxx>
> >
> > Extract the common phy blocks to reuse it.
> > The UART module will use the common blocks.
>
>
> Hi,
>
> Thanks for the patch. Few comments below.
>
> > Signed-off-by: Bongsu Jeon <bongsu.jeon@xxxxxxxxxxx>
> > ---
> > drivers/nfc/s3fwrn5/i2c.c | 111 ++++++++++++---------------------------
> > drivers/nfc/s3fwrn5/phy_common.h | 86 ++++++++++++++++++++++++++++++
> > 2 files changed, 119 insertions(+), 78 deletions(-)
> > create mode 100644 drivers/nfc/s3fwrn5/phy_common.h
> >
> > diff --git a/drivers/nfc/s3fwrn5/i2c.c b/drivers/nfc/s3fwrn5/i2c.c
> > index 9a64eea..cd1b2a7 100644
> > --- a/drivers/nfc/s3fwrn5/i2c.c
> > +++ b/drivers/nfc/s3fwrn5/i2c.c
> > @@ -15,75 +15,30 @@
> >
> > #include <net/nfc/nfc.h>
> >
> > -#include "s3fwrn5.h"
> > +#include "phy_common.h"
> >
> > #define S3FWRN5_I2C_DRIVER_NAME "s3fwrn5_i2c"
> >
> > -#define S3FWRN5_EN_WAIT_TIME 20
> > -
> > struct s3fwrn5_i2c_phy {
> > + struct phy_common common;
> > struct i2c_client *i2c_dev;
> > - struct nci_dev *ndev;
> > -
> > - int gpio_en;
> > - int gpio_fw_wake;
> > -
> > - struct mutex mutex;
> >
> > - enum s3fwrn5_mode mode;
> > unsigned int irq_skip:1;
> > };
> >
> > -static void s3fwrn5_i2c_set_wake(void *phy_id, bool wake)
> > -{
> > - struct s3fwrn5_i2c_phy *phy = phy_id;
> > -
> > - mutex_lock(&phy->mutex);
> > - gpio_set_value(phy->gpio_fw_wake, wake);
> > - msleep(S3FWRN5_EN_WAIT_TIME);
> > - mutex_unlock(&phy->mutex);
> > -}
> > -
> > static void s3fwrn5_i2c_set_mode(void *phy_id, enum s3fwrn5_mode mode)
> > {
> > struct s3fwrn5_i2c_phy *phy = phy_id;
> >
> > - mutex_lock(&phy->mutex);
> > + mutex_lock(&phy->common.mutex);
> >
> > - if (phy->mode == mode)
> > + if (s3fwrn5_phy_power_ctrl(&phy->common, mode) == false)
> > goto out;
> >
> > - phy->mode = mode;
> > -
> > - gpio_set_value(phy->gpio_en, 1);
> > - gpio_set_value(phy->gpio_fw_wake, 0);
> > - if (mode == S3FWRN5_MODE_FW)
> > - gpio_set_value(phy->gpio_fw_wake, 1);
> > -
> > - if (mode != S3FWRN5_MODE_COLD) {
> > - msleep(S3FWRN5_EN_WAIT_TIME);
> > - gpio_set_value(phy->gpio_en, 0);
> > - msleep(S3FWRN5_EN_WAIT_TIME);
> > - }
> > -
> > phy->irq_skip = true;
> >
> > out:
> > - mutex_unlock(&phy->mutex);
> > -}
> > -
> > -static enum s3fwrn5_mode s3fwrn5_i2c_get_mode(void *phy_id)
> > -{
> > - struct s3fwrn5_i2c_phy *phy = phy_id;
> > - enum s3fwrn5_mode mode;
> > -
> > - mutex_lock(&phy->mutex);
> > -
> > - mode = phy->mode;
> > -
> > - mutex_unlock(&phy->mutex);
> > -
> > - return mode;
> > + mutex_unlock(&phy->common.mutex);
> > }
> >
> > static int s3fwrn5_i2c_write(void *phy_id, struct sk_buff *skb)
> > @@ -91,7 +46,7 @@ static int s3fwrn5_i2c_write(void *phy_id, struct sk_buff *skb)
> > struct s3fwrn5_i2c_phy *phy = phy_id;
> > int ret;
> >
> > - mutex_lock(&phy->mutex);
> > + mutex_lock(&phy->common.mutex);
> >
> > phy->irq_skip = false;
> >
> > @@ -102,7 +57,7 @@ static int s3fwrn5_i2c_write(void *phy_id, struct sk_buff *skb)
> > ret = i2c_master_send(phy->i2c_dev, skb->data, skb->len);
> > }
> >
> > - mutex_unlock(&phy->mutex);
> > + mutex_unlock(&phy->common.mutex);
> >
> > if (ret < 0)
> > return ret;
> > @@ -114,9 +69,9 @@ static int s3fwrn5_i2c_write(void *phy_id, struct sk_buff *skb)
> > }
> >
> > static const struct s3fwrn5_phy_ops i2c_phy_ops = {
> > - .set_wake = s3fwrn5_i2c_set_wake,
> > + .set_wake = s3fwrn5_phy_set_wake,
> > .set_mode = s3fwrn5_i2c_set_mode,
> > - .get_mode = s3fwrn5_i2c_get_mode,
> > + .get_mode = s3fwrn5_phy_get_mode,
> > .write = s3fwrn5_i2c_write,
> > };
> >
> > @@ -128,7 +83,7 @@ static int s3fwrn5_i2c_read(struct s3fwrn5_i2c_phy *phy)
> > char hdr[4];
> > int ret;
> >
> > - hdr_size = (phy->mode == S3FWRN5_MODE_NCI) ?
> > + hdr_size = (phy->common.mode == S3FWRN5_MODE_NCI) ?
> > NCI_CTRL_HDR_SIZE : S3FWRN5_FW_HDR_SIZE;
> > ret = i2c_master_recv(phy->i2c_dev, hdr, hdr_size);
> > if (ret < 0)
> > @@ -137,7 +92,7 @@ static int s3fwrn5_i2c_read(struct s3fwrn5_i2c_phy *phy)
> > if (ret < hdr_size)
> > return -EBADMSG;
> >
> > - data_len = (phy->mode == S3FWRN5_MODE_NCI) ?
> > + data_len = (phy->common.mode == S3FWRN5_MODE_NCI) ?
> > ((struct nci_ctrl_hdr *)hdr)->plen :
> > ((struct s3fwrn5_fw_header *)hdr)->len;
> >
> > @@ -157,24 +112,24 @@ static int s3fwrn5_i2c_read(struct s3fwrn5_i2c_phy *phy)
> > }
> >
> > out:
> > - return s3fwrn5_recv_frame(phy->ndev, skb, phy->mode);
> > + return s3fwrn5_recv_frame(phy->common.ndev, skb, phy->common.mode);
> > }
> >
> > static irqreturn_t s3fwrn5_i2c_irq_thread_fn(int irq, void *phy_id)
> > {
> > struct s3fwrn5_i2c_phy *phy = phy_id;
> >
> > - if (!phy || !phy->ndev) {
> > + if (!phy || !phy->common.ndev) {
> > WARN_ON_ONCE(1);
> > return IRQ_NONE;
> > }
> >
> > - mutex_lock(&phy->mutex);
> > + mutex_lock(&phy->common.mutex);
> >
> > if (phy->irq_skip)
> > goto out;
> >
> > - switch (phy->mode) {
> > + switch (phy->common.mode) {
> > case S3FWRN5_MODE_NCI:
> > case S3FWRN5_MODE_FW:
> > s3fwrn5_i2c_read(phy);
> > @@ -184,7 +139,7 @@ static irqreturn_t s3fwrn5_i2c_irq_thread_fn(int irq, void *phy_id)
> > }
> >
> > out:
> > - mutex_unlock(&phy->mutex);
> > + mutex_unlock(&phy->common.mutex);
> >
> > return IRQ_HANDLED;
> > }
> > @@ -197,19 +152,19 @@ static int s3fwrn5_i2c_parse_dt(struct i2c_client *client)
> > if (!np)
> > return -ENODEV;
> >
> > - phy->gpio_en = of_get_named_gpio(np, "en-gpios", 0);
> > - if (!gpio_is_valid(phy->gpio_en)) {
> > + phy->common.gpio_en = of_get_named_gpio(np, "en-gpios", 0);
> > + if (!gpio_is_valid(phy->common.gpio_en)) {
> > /* Support also deprecated property */
> > - phy->gpio_en = of_get_named_gpio(np, "s3fwrn5,en-gpios", 0);
> > - if (!gpio_is_valid(phy->gpio_en))
> > + phy->common.gpio_en = of_get_named_gpio(np, "s3fwrn5,en-gpios", 0);
> > + if (!gpio_is_valid(phy->common.gpio_en))
> > return -ENODEV;
> > }
> >
> > - phy->gpio_fw_wake = of_get_named_gpio(np, "wake-gpios", 0);
> > - if (!gpio_is_valid(phy->gpio_fw_wake)) {
> > + phy->common.gpio_fw_wake = of_get_named_gpio(np, "wake-gpios", 0);
> > + if (!gpio_is_valid(phy->common.gpio_fw_wake)) {
> > /* Support also deprecated property */
> > - phy->gpio_fw_wake = of_get_named_gpio(np, "s3fwrn5,fw-gpios", 0);
> > - if (!gpio_is_valid(phy->gpio_fw_wake))
> > + phy->common.gpio_fw_wake = of_get_named_gpio(np, "s3fwrn5,fw-gpios", 0);
>
> The lines here should wrap at 80 character.
>
> > + if (!gpio_is_valid(phy->common.gpio_fw_wake))
> > return -ENODEV;
> > }
> >
> > @@ -226,8 +181,8 @@ static int s3fwrn5_i2c_probe(struct i2c_client *client,
> > if (!phy)
> > return -ENOMEM;
> >
> > - mutex_init(&phy->mutex);
> > - phy->mode = S3FWRN5_MODE_COLD;
> > + mutex_init(&phy->common.mutex);
> > + phy->common.mode = S3FWRN5_MODE_COLD;
> > phy->irq_skip = true;
> >
> > phy->i2c_dev = client;
> > @@ -237,17 +192,17 @@ static int s3fwrn5_i2c_probe(struct i2c_client *client,
> > if (ret < 0)
> > return ret;
> >
> > - ret = devm_gpio_request_one(&phy->i2c_dev->dev, phy->gpio_en,
> > - GPIOF_OUT_INIT_HIGH, "s3fwrn5_en");
> > + ret = devm_gpio_request_one(&phy->i2c_dev->dev, phy->common.gpio_en,
> > + GPIOF_OUT_INIT_HIGH, "s3fwrn5_en");
> > if (ret < 0)
> > return ret;
> >
> > - ret = devm_gpio_request_one(&phy->i2c_dev->dev, phy->gpio_fw_wake,
> > - GPIOF_OUT_INIT_LOW, "s3fwrn5_fw_wake");
> > + ret = devm_gpio_request_one(&phy->i2c_dev->dev, phy->common.gpio_fw_wake,
> > + GPIOF_OUT_INIT_LOW, "s3fwrn5_fw_wake");
> > if (ret < 0)
> > return ret;
> >
> > - ret = s3fwrn5_probe(&phy->ndev, phy, &phy->i2c_dev->dev, &i2c_phy_ops);
> > + ret = s3fwrn5_probe(&phy->common.ndev, phy, &phy->i2c_dev->dev, &i2c_phy_ops);
>
> Please wrap the lines.
>
> > if (ret < 0)
> > return ret;
> >
> > @@ -255,7 +210,7 @@ static int s3fwrn5_i2c_probe(struct i2c_client *client,
> > s3fwrn5_i2c_irq_thread_fn, IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
> > S3FWRN5_I2C_DRIVER_NAME, phy);
> > if (ret)
> > - s3fwrn5_remove(phy->ndev);
> > + s3fwrn5_remove(phy->common.ndev);
> >
> > return ret;
> > }
> > @@ -264,7 +219,7 @@ static int s3fwrn5_i2c_remove(struct i2c_client *client)
> > {
> > struct s3fwrn5_i2c_phy *phy = i2c_get_clientdata(client);
> >
> > - s3fwrn5_remove(phy->ndev);
> > + s3fwrn5_remove(phy->common.ndev);
> >
> > return 0;
> > }
> > diff --git a/drivers/nfc/s3fwrn5/phy_common.h b/drivers/nfc/s3fwrn5/phy_common.h
> > new file mode 100644
> > index 0000000..14f7690
> > --- /dev/null
> > +++ b/drivers/nfc/s3fwrn5/phy_common.h
> > @@ -0,0 +1,86 @@
> > +/* SPDX-License-Identifier: GPL-2.0-or-later
> > + *
> > + * Link Layer for Samsung S3FWRN5 NCI based Driver
> > + *
> > + * Copyright (C) 2015 Samsung Electrnoics
> > + * Robert Baldyga <r.baldyga@xxxxxxxxxxx>
> > + * Copyright (C) 2020 Samsung Electrnoics
> > + * Bongsu Jeon <bongsu.jeon@xxxxxxxxxxx>
> > + */
> > +
> > +#ifndef __LOCAL_PHY_COMMON_H
> > +#define __LOCAL_PHY_COMMON_H
>
> Header guard: __NFC_S3FWRN5_PHY_COMMON_H
>
> > +
> > +#include "s3fwrn5.h"
>
> This include should not be needed.
>

Actually, I included this because of enum s3fwrn5_mode.
Do you think the following structure is good?

0. remove the '#include "s3fwrn5.h" and the common function's
definition in phy_common.h.
1. make phy_common.c that includes the common function's definition
and "s3fwrn5.h , phy_common.h".
2. i2c.c includes "s3fwrn5.h , phy_common.h".

> > +
> > +#define S3FWRN5_EN_WAIT_TIME 20
> > +
> > +struct phy_common {
> > + struct nci_dev *ndev;
> > +
> > + int gpio_en;
> > + int gpio_fw_wake;
> > +
> > + struct mutex mutex;
> > +
> > + enum s3fwrn5_mode mode;
> > +};
> > +
> > +static inline void s3fwrn5_phy_set_wake(void *phy_id, bool wake)
> > +{
>
> All these should go to a C source file. If needed - GPL exported.
>
> > + struct phy_common *phy = phy_id;
> > +
> > + mutex_lock(&phy->mutex);
> > + gpio_set_value(phy->gpio_fw_wake, wake);
> > + msleep(S3FWRN5_EN_WAIT_TIME);
> > + mutex_unlock(&phy->mutex);
> > +}
> > +
> > +static inline bool s3fwrn5_phy_power_ctrl(struct phy_common *phy,
> > + enum s3fwrn5_mode mode)
> > +{
> > + if (phy->mode == mode)
> > + return false;
> > +
> > + phy->mode = mode;
> > +
> > + gpio_set_value(phy->gpio_en, 1);
> > + gpio_set_value(phy->gpio_fw_wake, 0);
> > + if (mode == S3FWRN5_MODE_FW)
> > + gpio_set_value(phy->gpio_fw_wake, 1);
> > +
> > + if (mode != S3FWRN5_MODE_COLD) {
> > + msleep(S3FWRN5_EN_WAIT_TIME);
> > + gpio_set_value(phy->gpio_en, 0);
> > + msleep(S3FWRN5_EN_WAIT_TIME);
> > + }
> > +
> > + return true;
> > +}
> > +
> > +static inline void s3fwrn5_phy_set_mode(void *phy_id, enum s3fwrn5_mode mode)
> > +{
>
> This looks unused. If you need it only for your next chip, add it with
> next patch (the patch adding the user).
>
Okay I understand it.

> Best regards,
> Krzysztof

Next message: Sakari Ailus: "Re: [PATCH v2 2/2] media: dt-bindings: media: i2c: Add IMX300 CMOS sensor binding"
Previous message: Dexuan Cui: "RE: kdump always hangs in rcu_barrier() -> wait_for_completion()"
In reply to: Krzysztof Kozlowski: "Re: [PATCH net-next 3/3] nfc: s3fwrn5: extract the common phy blocks"
Next in thread: Krzysztof Kozlowski: "Re: [PATCH net-next 3/3] nfc: s3fwrn5: extract the common phy blocks"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]