[PATCH v1] media: ov8856: Fix Bayer format dependance on mode

[Robert Foss]

The Bayer GRBG10 mode used for earlier modes 3280x2460 and
1640x1232 isn't the mode output by the sensor for the
3264x2448 and 1632x1224 modes.

Switch from MEDIA_BUS_FMT_SGRBG10_1X10 to MEDIA_BUS_FMT_SBGGR10_1X10
for 3264x2448 & 1632x1224 modes.

Signed-off-by: Robert Foss <robert.foss@xxxxxxxxxx>
---

This patch is sent out after Dongchun Zhu clarified the Bayer
modes used by different sensor configuration in the below thread.

https://lkml.org/lkml/2020/11/24/335

 drivers/media/i2c/ov8856.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/media/i2c/ov8856.c b/drivers/media/i2c/ov8856.c
index 2f4ceaa80593..a2dcbece558c 100644
--- a/drivers/media/i2c/ov8856.c
+++ b/drivers/media/i2c/ov8856.c
@@ -1281,8 +1281,13 @@ static void ov8856_update_pad_format(const struct ov8856_mode *mode,
 {
 	fmt->width = mode->width;
 	fmt->height = mode->height;
-	fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10;
 	fmt->field = V4L2_FIELD_NONE;
+
+	if (mode->reg_list.regs == mode_3264x2448_regs ||
+	    mode->reg_list.regs == mode_1632x1224_regs)
+		fmt->code = MEDIA_BUS_FMT_SBGGR10_1X10;
+	else
+		fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10;
 }
 
 static int ov8856_start_streaming(struct ov8856 *ov8856)
-- 
2.27.0