Re: [PATCH v2] counter: microchip-tcb-capture: Fix CMR value check

[Kamel Bouhara]

On Sat, Nov 14, 2020 at 06:28:05PM -0500, William Breathitt Gray wrote:
> The ATMEL_TC_ETRGEDG_* defines are not masks but rather possible values
> for CMR. This patch fixes the action_get() callback to properly check
> for these values rather than mask them.
>
> Fixes: 106b104137fd ("counter: Add microchip TCB capture counter")
> Cc: Kamel Bouhara <kamel.bouhara@xxxxxxxxxxx>
> Acked-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
> Signed-off-by: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
> ---

Acked-by: Kamel Bouhara <kamel.bouhara@xxxxxxxxxxx>

>  drivers/counter/microchip-tcb-capture.c | 16 ++++++++++------
>  1 file changed, 10 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/counter/microchip-tcb-capture.c b/drivers/counter/microchip-tcb-capture.c
> index 039c54a78aa5..710acc0a3704 100644
> --- a/drivers/counter/microchip-tcb-capture.c
> +++ b/drivers/counter/microchip-tcb-capture.c
> @@ -183,16 +183,20 @@ static int mchp_tc_count_action_get(struct counter_device *counter,
>
>  	regmap_read(priv->regmap, ATMEL_TC_REG(priv->channel[0], CMR), &cmr);
>
> -	*action = MCHP_TC_SYNAPSE_ACTION_NONE;
> -
> -	if (cmr & ATMEL_TC_ETRGEDG_NONE)
> +	switch (cmr & ATMEL_TC_ETRGEDG) {
> +	default:
>  		*action = MCHP_TC_SYNAPSE_ACTION_NONE;
> -	else if (cmr & ATMEL_TC_ETRGEDG_RISING)
> +		break;
> +	case ATMEL_TC_ETRGEDG_RISING:
>  		*action = MCHP_TC_SYNAPSE_ACTION_RISING_EDGE;
> -	else if (cmr & ATMEL_TC_ETRGEDG_FALLING)
> +		break;
> +	case ATMEL_TC_ETRGEDG_FALLING:
>  		*action = MCHP_TC_SYNAPSE_ACTION_FALLING_EDGE;
> -	else if (cmr & ATMEL_TC_ETRGEDG_BOTH)
> +		break;
> +	case ATMEL_TC_ETRGEDG_BOTH:
>  		*action = MCHP_TC_SYNAPSE_ACTION_BOTH_EDGE;
> +		break;
> +	}
>
>  	return 0;
>  }
> --
> 2.29.2
>

--
Kamel Bouhara, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com