[PATCH v2 9/9] media: docs: Move the H264 stateless codec uAPI
From: Ezequiel Garcia
Date: Fri Nov 13 2020 - 16:52:43 EST
Now that we've destaged the H264 stateless codec controls,
and with all the pieces in place, update the documentation
and move it to its own section.
Signed-off-by: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxx>
---
.../userspace-api/media/v4l/common.rst | 1 +
.../media/v4l/ext-ctrls-codec-stateless.rst | 674 +++++++++++++++++
.../media/v4l/ext-ctrls-codec.rst | 692 ------------------
.../media/v4l/pixfmt-compressed.rst | 14 +-
4 files changed, 682 insertions(+), 699 deletions(-)
create mode 100644 Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst
diff --git a/Documentation/userspace-api/media/v4l/common.rst b/Documentation/userspace-api/media/v4l/common.rst
index d84aeb703165..8c263c5a85d8 100644
--- a/Documentation/userspace-api/media/v4l/common.rst
+++ b/Documentation/userspace-api/media/v4l/common.rst
@@ -44,6 +44,7 @@ applicable to all devices.
ext-ctrls-image-source
ext-ctrls-image-process
ext-ctrls-codec
+ ext-ctrls-codec-stateless
ext-ctrls-jpeg
ext-ctrls-dv
ext-ctrls-rf-tuner
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst
new file mode 100644
index 000000000000..ab433afe625f
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst
@@ -0,0 +1,674 @@
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
+
+.. _codec-stateless-controls:
+
+*********************************
+Stateless Codec Control Reference
+*********************************
+
+The Stateless Codec control class is intended to support
+stateless decoder and encoders (i.e. hardware accelerators).
+
+These drivers are typically supported by the :ref:`stateless_decoder`,
+and deal with parsed pixel formats such as V4L2_PIX_FMT_H264_SLICE.
+
+Stateless Codec Control ID
+==========================
+
+.. _codec-stateless-control-id:
+
+``V4L2_CID_CODEC_STATELESS_CLASS (class)``
+ The Codec class descriptor.
+
+.. _v4l2-codec-stateless-h264:
+
+``V4L2_CID_STATELESS_H264_SPS (struct)``
+ Specifies the sequence parameter set (as extracted from the
+ bitstream) for the associated H264 slice data. This includes the
+ necessary parameters for configuring a stateless hardware decoding
+ pipeline for H264. The bitstream parameters are defined according
+ to :ref:`h264`, section 7.4.2.1.1 "Sequence Parameter Set Data
+ Semantics". For further documentation, refer to the above
+ specification, unless there is an explicit comment stating
+ otherwise.
+
+.. c:type:: v4l2_ctrl_h264_sps
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_ctrl_h264_sps
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - __u8
+ - ``profile_idc``
+ -
+ * - __u8
+ - ``constraint_set_flags``
+ - See :ref:`Sequence Parameter Set Constraints Set Flags <h264_sps_constraints_set_flags>`
+ * - __u8
+ - ``level_idc``
+ -
+ * - __u8
+ - ``seq_parameter_set_id``
+ -
+ * - __u8
+ - ``chroma_format_idc``
+ -
+ * - __u8
+ - ``bit_depth_luma_minus8``
+ -
+ * - __u8
+ - ``bit_depth_chroma_minus8``
+ -
+ * - __u8
+ - ``log2_max_frame_num_minus4``
+ -
+ * - __u8
+ - ``pic_order_cnt_type``
+ -
+ * - __u8
+ - ``log2_max_pic_order_cnt_lsb_minus4``
+ -
+ * - __u8
+ - ``max_num_ref_frames``
+ -
+ * - __u8
+ - ``num_ref_frames_in_pic_order_cnt_cycle``
+ -
+ * - __s32
+ - ``offset_for_ref_frame[255]``
+ -
+ * - __s32
+ - ``offset_for_non_ref_pic``
+ -
+ * - __s32
+ - ``offset_for_top_to_bottom_field``
+ -
+ * - __u16
+ - ``pic_width_in_mbs_minus1``
+ -
+ * - __u16
+ - ``pic_height_in_map_units_minus1``
+ -
+ * - __u32
+ - ``flags``
+ - See :ref:`Sequence Parameter Set Flags <h264_sps_flags>`
+
+.. _h264_sps_constraints_set_flags:
+
+``Sequence Parameter Set Constraints Set Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - ``V4L2_H264_SPS_CONSTRAINT_SET0_FLAG``
+ - 0x00000001
+ -
+ * - ``V4L2_H264_SPS_CONSTRAINT_SET1_FLAG``
+ - 0x00000002
+ -
+ * - ``V4L2_H264_SPS_CONSTRAINT_SET2_FLAG``
+ - 0x00000004
+ -
+ * - ``V4L2_H264_SPS_CONSTRAINT_SET3_FLAG``
+ - 0x00000008
+ -
+ * - ``V4L2_H264_SPS_CONSTRAINT_SET4_FLAG``
+ - 0x00000010
+ -
+ * - ``V4L2_H264_SPS_CONSTRAINT_SET5_FLAG``
+ - 0x00000020
+ -
+
+.. _h264_sps_flags:
+
+``Sequence Parameter Set Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - ``V4L2_H264_SPS_FLAG_SEPARATE_COLOUR_PLANE``
+ - 0x00000001
+ -
+ * - ``V4L2_H264_SPS_FLAG_QPPRIME_Y_ZERO_TRANSFORM_BYPASS``
+ - 0x00000002
+ -
+ * - ``V4L2_H264_SPS_FLAG_DELTA_PIC_ORDER_ALWAYS_ZERO``
+ - 0x00000004
+ -
+ * - ``V4L2_H264_SPS_FLAG_GAPS_IN_FRAME_NUM_VALUE_ALLOWED``
+ - 0x00000008
+ -
+ * - ``V4L2_H264_SPS_FLAG_FRAME_MBS_ONLY``
+ - 0x00000010
+ -
+ * - ``V4L2_H264_SPS_FLAG_MB_ADAPTIVE_FRAME_FIELD``
+ - 0x00000020
+ -
+ * - ``V4L2_H264_SPS_FLAG_DIRECT_8X8_INFERENCE``
+ - 0x00000040
+ -
+
+``V4L2_CID_STATELESS_H264_PPS (struct)``
+ Specifies the picture parameter set (as extracted from the
+ bitstream) for the associated H264 slice data. This includes the
+ necessary parameters for configuring a stateless hardware decoding
+ pipeline for H264. The bitstream parameters are defined according
+ to :ref:`h264`, section 7.4.2.2 "Picture Parameter Set RBSP
+ Semantics". For further documentation, refer to the above
+ specification, unless there is an explicit comment stating
+ otherwise.
+
+.. c:type:: v4l2_ctrl_h264_pps
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_ctrl_h264_pps
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - __u8
+ - ``pic_parameter_set_id``
+ -
+ * - __u8
+ - ``seq_parameter_set_id``
+ -
+ * - __u8
+ - ``num_slice_groups_minus1``
+ -
+ * - __u8
+ - ``num_ref_idx_l0_default_active_minus1``
+ -
+ * - __u8
+ - ``num_ref_idx_l1_default_active_minus1``
+ -
+ * - __u8
+ - ``weighted_bipred_idc``
+ -
+ * - __s8
+ - ``pic_init_qp_minus26``
+ -
+ * - __s8
+ - ``pic_init_qs_minus26``
+ -
+ * - __s8
+ - ``chroma_qp_index_offset``
+ -
+ * - __s8
+ - ``second_chroma_qp_index_offset``
+ -
+ * - __u16
+ - ``flags``
+ - See :ref:`Picture Parameter Set Flags <h264_pps_flags>`
+
+.. _h264_pps_flags:
+
+``Picture Parameter Set Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - ``V4L2_H264_PPS_FLAG_ENTROPY_CODING_MODE``
+ - 0x00000001
+ -
+ * - ``V4L2_H264_PPS_FLAG_BOTTOM_FIELD_PIC_ORDER_IN_FRAME_PRESENT``
+ - 0x00000002
+ -
+ * - ``V4L2_H264_PPS_FLAG_WEIGHTED_PRED``
+ - 0x00000004
+ -
+ * - ``V4L2_H264_PPS_FLAG_DEBLOCKING_FILTER_CONTROL_PRESENT``
+ - 0x00000008
+ -
+ * - ``V4L2_H264_PPS_FLAG_CONSTRAINED_INTRA_PRED``
+ - 0x00000010
+ -
+ * - ``V4L2_H264_PPS_FLAG_REDUNDANT_PIC_CNT_PRESENT``
+ - 0x00000020
+ -
+ * - ``V4L2_H264_PPS_FLAG_TRANSFORM_8X8_MODE``
+ - 0x00000040
+ -
+ * - ``V4L2_H264_PPS_FLAG_SCALING_MATRIX_PRESENT``
+ - 0x00000080
+ - Indicates that ``V4L2_CID_STATELESS_H264_SCALING_MATRIX``
+ must be used for this picture.
+
+``V4L2_CID_STATELESS_H264_SCALING_MATRIX (struct)``
+ Specifies the scaling matrix (as extracted from the bitstream) for
+ the associated H264 slice data. The bitstream parameters are
+ defined according to :ref:`h264`, section 7.4.2.1.1.1 "Scaling
+ List Semantics". For further documentation, refer to the above
+ specification, unless there is an explicit comment stating
+ otherwise.
+
+.. c:type:: v4l2_ctrl_h264_scaling_matrix
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_ctrl_h264_scaling_matrix
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - __u8
+ - ``scaling_list_4x4[6][16]``
+ - Scaling matrix after applying the inverse scanning process.
+ Expected list order is Intra Y, Intra Cb, Intra Cr, Inter Y,
+ Inter Cb, Inter Cr. The values on each scaling list are
+ expected in raster scan order.
+ * - __u8
+ - ``scaling_list_8x8[6][64]``
+ - Scaling matrix after applying the inverse scanning process.
+ Expected list order is Intra Y, Inter Y, Intra Cb, Inter Cb,
+ Intra Cr, Inter Cr. The values on each scaling list are
+ expected in raster scan order.
+
+``V4L2_CID_STATELESS_H264_SLICE_PARAMS (struct)``
+ Specifies the slice parameters (as extracted from the bitstream)
+ for the associated H264 slice data. This includes the necessary
+ parameters for configuring a stateless hardware decoding pipeline
+ for H264. The bitstream parameters are defined according to
+ :ref:`h264`, section 7.4.3 "Slice Header Semantics". For further
+ documentation, refer to the above specification, unless there is
+ an explicit comment stating otherwise.
+
+.. c:type:: v4l2_ctrl_h264_slice_params
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_ctrl_h264_slice_params
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - __u32
+ - ``header_bit_size``
+ - Offset in bits to slice_data() from the beginning of this slice.
+ * - __u32
+ - ``first_mb_in_slice``
+ -
+ * - __u8
+ - ``slice_type``
+ -
+ * - __u8
+ - ``colour_plane_id``
+ -
+ * - __u8
+ - ``redundant_pic_cnt``
+ -
+ * - __u8
+ - ``cabac_init_idc``
+ -
+ * - __s8
+ - ``slice_qp_delta``
+ -
+ * - __s8
+ - ``slice_qs_delta``
+ -
+ * - __u8
+ - ``disable_deblocking_filter_idc``
+ -
+ * - __s8
+ - ``slice_alpha_c0_offset_div2``
+ -
+ * - __s8
+ - ``slice_beta_offset_div2``
+ -
+ * - __u8
+ - ``num_ref_idx_l0_active_minus1``
+ - If num_ref_idx_active_override_flag is not set, this field must be
+ set to the value of num_ref_idx_l0_default_active_minus1.
+ * - __u8
+ - ``num_ref_idx_l1_active_minus1``
+ - If num_ref_idx_active_override_flag is not set, this field must be
+ set to the value of num_ref_idx_l1_default_active_minus1.
+ * - __u8
+ - ``reserved``
+ - Applications and drivers must set this to zero.
+ * - struct :c:type:`v4l2_h264_reference`
+ - ``ref_pic_list0[32]``
+ - Reference picture list after applying the per-slice modifications
+ * - struct :c:type:`v4l2_h264_reference`
+ - ``ref_pic_list1[32]``
+ - Reference picture list after applying the per-slice modifications
+ * - __u32
+ - ``flags``
+ - See :ref:`Slice Parameter Flags <h264_slice_flags>`
+
+.. _h264_slice_flags:
+
+``Slice Parameter Set Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - ``V4L2_H264_SLICE_FLAG_DIRECT_SPATIAL_MV_PRED``
+ - 0x00000001
+ -
+ * - ``V4L2_H264_SLICE_FLAG_SP_FOR_SWITCH``
+ - 0x00000002
+ -
+
+``V4L2_CID_STATELESS_H264_PRED_WEIGHTS (struct)``
+ Prediction weight table defined according to :ref:`h264`,
+ section 7.4.3.2 "Prediction Weight Table Semantics".
+ The prediction weight table must be passed by applications
+ under the conditions explained in section 7.3.3 "Slice header
+ syntax".
+
+.. c:type:: v4l2_ctrl_h264_pred_weights
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_ctrl_h264_pred_weights
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - __u16
+ - ``luma_log2_weight_denom``
+ -
+ * - __u16
+ - ``chroma_log2_weight_denom``
+ -
+ * - struct :c:type:`v4l2_h264_weight_factors`
+ - ``weight_factors[2]``
+ - The weight factors at index 0 are the weight factors for the reference
+ list 0, the one at index 1 for the reference list 1.
+
+.. c:type:: v4l2_h264_weight_factors
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_h264_weight_factors
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - __s16
+ - ``luma_weight[32]``
+ -
+ * - __s16
+ - ``luma_offset[32]``
+ -
+ * - __s16
+ - ``chroma_weight[32][2]``
+ -
+ * - __s16
+ - ``chroma_offset[32][2]``
+ -
+
+``Picture Reference``
+
+.. c:type:: v4l2_h264_reference
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_h264_reference
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - __u8
+ - ``fields``
+ - Specifies how the picture is referenced. See :ref:`Reference Fields <h264_ref_fields>`
+ * - __u8
+ - ``index``
+ - Index into the :c:type:`v4l2_ctrl_h264_decode_params`.dpb array.
+
+.. _h264_ref_fields:
+
+``Reference Fields``
+
+.. cssclass:: longtable
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - ``V4L2_H264_TOP_FIELD_REF``
+ - 0x1
+ - The top field in field pair is used for short-term reference.
+ * - ``V4L2_H264_BOTTOM_FIELD_REF``
+ - 0x2
+ - The bottom field in field pair is used for short-term reference.
+ * - ``V4L2_H264_FRAME_REF``
+ - 0x3
+ - The frame (or the top/bottom fields, if it's a field pair)
+ is used for short-term reference.
+
+``V4L2_CID_STATELESS_H264_DECODE_PARAMS (struct)``
+ Specifies the decode parameters (as extracted from the bitstream)
+ for the associated H264 slice data. This includes the necessary
+ parameters for configuring a stateless hardware decoding pipeline
+ for H264. The bitstream parameters are defined according to
+ :ref:`h264`. For further documentation, refer to the above
+ specification, unless there is an explicit comment stating
+ otherwise.
+
+.. c:type:: v4l2_ctrl_h264_decode_params
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_ctrl_h264_decode_params
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - struct :c:type:`v4l2_h264_dpb_entry`
+ - ``dpb[16]``
+ -
+ * - __u16
+ - ``nal_ref_idc``
+ - NAL reference ID value coming from the NAL Unit header
+ * - __u16
+ - ``frame_num``
+ -
+ * - __s32
+ - ``top_field_order_cnt``
+ - Picture Order Count for the coded top field
+ * - __s32
+ - ``bottom_field_order_cnt``
+ - Picture Order Count for the coded bottom field
+ * - __u16
+ - ``idr_pic_id``
+ -
+ * - __u16
+ - ``pic_order_cnt_lsb``
+ -
+ * - __s32
+ - ``delta_pic_order_cnt_bottom``
+ -
+ * - __s32
+ - ``delta_pic_order_cnt0``
+ -
+ * - __s32
+ - ``delta_pic_order_cnt1``
+ -
+ * - __u32
+ - ``dec_ref_pic_marking_bit_size``
+ - Size in bits of the dec_ref_pic_marking() syntax element.
+ * - __u32
+ - ``pic_order_cnt_bit_size``
+ - Combined size in bits of the picture order count related syntax
+ elements: pic_order_cnt_lsb, delta_pic_order_cnt_bottom,
+ delta_pic_order_cnt0, and delta_pic_order_cnt1.
+ * - __u32
+ - ``slice_group_change_cycle``
+ -
+ * - __u32
+ - ``reserved``
+ - Applications and drivers must set this to zero.
+ * - __u32
+ - ``flags``
+ - See :ref:`Decode Parameters Flags <h264_decode_params_flags>`
+
+.. _h264_decode_params_flags:
+
+``Decode Parameters Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - ``V4L2_H264_DECODE_PARAM_FLAG_IDR_PIC``
+ - 0x00000001
+ - That picture is an IDR picture
+ * - ``V4L2_H264_DECODE_PARAM_FLAG_FIELD_PIC``
+ - 0x00000002
+ -
+ * - ``V4L2_H264_DECODE_PARAM_FLAG_BOTTOM_FIELD``
+ - 0x00000004
+ -
+
+.. c:type:: v4l2_h264_dpb_entry
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_h264_dpb_entry
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - __u64
+ - ``reference_ts``
+ - Timestamp of the V4L2 capture buffer to use as reference, used
+ with B-coded and P-coded frames. The timestamp refers to the
+ ``timestamp`` field in struct :c:type:`v4l2_buffer`. Use the
+ :c:func:`v4l2_timeval_to_ns()` function to convert the struct
+ :c:type:`timeval` in struct :c:type:`v4l2_buffer` to a __u64.
+ * - __u32
+ - ``pic_num``
+ -
+ * - __u16
+ - ``frame_num``
+ -
+ * - __u8
+ - ``fields``
+ - Specifies how the DPB entry is referenced. See :ref:`Reference Fields <h264_ref_fields>`
+ * - __u8
+ - ``reserved[5]``
+ - Applications and drivers must set this to zero.
+ * - __s32
+ - ``top_field_order_cnt``
+ -
+ * - __s32
+ - ``bottom_field_order_cnt``
+ -
+ * - __u32
+ - ``flags``
+ - See :ref:`DPB Entry Flags <h264_dpb_flags>`
+
+.. _h264_dpb_flags:
+
+``DPB Entries Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - ``V4L2_H264_DPB_ENTRY_FLAG_VALID``
+ - 0x00000001
+ - The DPB entry is valid (non-empty) and should be considered.
+ * - ``V4L2_H264_DPB_ENTRY_FLAG_ACTIVE``
+ - 0x00000002
+ - The DPB entry is used for reference.
+ * - ``V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM``
+ - 0x00000004
+ - The DPB entry is used for long-term reference.
+ * - ``V4L2_H264_DPB_ENTRY_FLAG_FIELD``
+ - 0x00000008
+ - The DPB entry is a single field or a complementary field pair.
+
+``V4L2_CID_STATELESS_H264_DECODE_MODE (enum)``
+ Specifies the decoding mode to use. Currently exposes slice-based and
+ frame-based decoding but new modes might be added later on.
+ This control is used as a modifier for V4L2_PIX_FMT_H264_SLICE
+ pixel format. Applications that support V4L2_PIX_FMT_H264_SLICE
+ are required to set this control in order to specify the decoding mode
+ that is expected for the buffer.
+ Drivers may expose a single or multiple decoding modes, depending
+ on what they can support.
+
+.. c:type:: v4l2_mpeg_video_h264_decode_mode
+
+.. cssclass:: longtable
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - ``V4L2_STATELESS_H264_DECODE_MODE_SLICE_BASED``
+ - 0
+ - Decoding is done at the slice granularity.
+ The OUTPUT buffer must contain a single slice.
+ When this mode is selected, the ``V4L2_CID_STATELESS_H264_SLICE_PARAMS``
+ control shall be set. When multiple slices compose a frame,
+ use of ``V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF`` flag
+ is required.
+ * - ``V4L2_STATELESS_H264_DECODE_MODE_FRAME_BASED``
+ - 1
+ - Decoding is done at the frame granularity,
+ The OUTPUT buffer must contain all slices needed to decode the
+ frame. The OUTPUT buffer must also contain both fields.
+ This mode will be supported by devices that
+ parse the slice(s) header(s) in hardware. When this mode is
+ selected, the ``V4L2_CID_STATELESS_H264_SLICE_PARAMS``
+ control shall not be set.
+
+``V4L2_CID_STATELESS_H264_START_CODE (enum)``
+ Specifies the H264 slice start code expected for each slice.
+ This control is used as a modifier for V4L2_PIX_FMT_H264_SLICE
+ pixel format. Applications that support V4L2_PIX_FMT_H264_SLICE
+ are required to set this control in order to specify the start code
+ that is expected for the buffer.
+ Drivers may expose a single or multiple start codes, depending
+ on what they can support.
+
+.. c:type:: v4l2_mpeg_video_h264_start_code
+
+.. cssclass:: longtable
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - ``V4L2_STATELESS_H264_START_CODE_NONE``
+ - 0
+ - Selecting this value specifies that H264 slices are passed
+ to the driver without any start code.
+ * - ``V4L2_STATELESS_H264_START_CODE_ANNEX_B``
+ - 1
+ - Selecting this value specifies that H264 slices are expected
+ to be prefixed by Annex B start codes. According to :ref:`h264`
+ valid start codes can be 3-bytes 0x000001 or 4-bytes 0x00000001.
+
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
index b31c52d9b1da..e815fffd1cd8 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
@@ -1502,698 +1502,6 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
- Layer number
-.. _v4l2-mpeg-h264:
-
-``V4L2_CID_MPEG_VIDEO_H264_SPS (struct)``
- Specifies the sequence parameter set (as extracted from the
- bitstream) for the associated H264 slice data. This includes the
- necessary parameters for configuring a stateless hardware decoding
- pipeline for H264. The bitstream parameters are defined according
- to :ref:`h264`, section 7.4.2.1.1 "Sequence Parameter Set Data
- Semantics". For further documentation, refer to the above
- specification, unless there is an explicit comment stating
- otherwise.
-
- .. note::
-
- This compound control is not yet part of the public kernel API and
- it is expected to change.
-
-.. c:type:: v4l2_ctrl_h264_sps
-
-.. cssclass:: longtable
-
-.. flat-table:: struct v4l2_ctrl_h264_sps
- :header-rows: 0
- :stub-columns: 0
- :widths: 1 1 2
-
- * - __u8
- - ``profile_idc``
- -
- * - __u8
- - ``constraint_set_flags``
- - See :ref:`Sequence Parameter Set Constraints Set Flags <h264_sps_constraints_set_flags>`
- * - __u8
- - ``level_idc``
- -
- * - __u8
- - ``seq_parameter_set_id``
- -
- * - __u8
- - ``chroma_format_idc``
- -
- * - __u8
- - ``bit_depth_luma_minus8``
- -
- * - __u8
- - ``bit_depth_chroma_minus8``
- -
- * - __u8
- - ``log2_max_frame_num_minus4``
- -
- * - __u8
- - ``pic_order_cnt_type``
- -
- * - __u8
- - ``log2_max_pic_order_cnt_lsb_minus4``
- -
- * - __u8
- - ``max_num_ref_frames``
- -
- * - __u8
- - ``num_ref_frames_in_pic_order_cnt_cycle``
- -
- * - __s32
- - ``offset_for_ref_frame[255]``
- -
- * - __s32
- - ``offset_for_non_ref_pic``
- -
- * - __s32
- - ``offset_for_top_to_bottom_field``
- -
- * - __u16
- - ``pic_width_in_mbs_minus1``
- -
- * - __u16
- - ``pic_height_in_map_units_minus1``
- -
- * - __u32
- - ``flags``
- - See :ref:`Sequence Parameter Set Flags <h264_sps_flags>`
-
-.. _h264_sps_constraints_set_flags:
-
-``Sequence Parameter Set Constraints Set Flags``
-
-.. cssclass:: longtable
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
- :widths: 1 1 2
-
- * - ``V4L2_H264_SPS_CONSTRAINT_SET0_FLAG``
- - 0x00000001
- -
- * - ``V4L2_H264_SPS_CONSTRAINT_SET1_FLAG``
- - 0x00000002
- -
- * - ``V4L2_H264_SPS_CONSTRAINT_SET2_FLAG``
- - 0x00000004
- -
- * - ``V4L2_H264_SPS_CONSTRAINT_SET3_FLAG``
- - 0x00000008
- -
- * - ``V4L2_H264_SPS_CONSTRAINT_SET4_FLAG``
- - 0x00000010
- -
- * - ``V4L2_H264_SPS_CONSTRAINT_SET5_FLAG``
- - 0x00000020
- -
-
-.. _h264_sps_flags:
-
-``Sequence Parameter Set Flags``
-
-.. cssclass:: longtable
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
- :widths: 1 1 2
-
- * - ``V4L2_H264_SPS_FLAG_SEPARATE_COLOUR_PLANE``
- - 0x00000001
- -
- * - ``V4L2_H264_SPS_FLAG_QPPRIME_Y_ZERO_TRANSFORM_BYPASS``
- - 0x00000002
- -
- * - ``V4L2_H264_SPS_FLAG_DELTA_PIC_ORDER_ALWAYS_ZERO``
- - 0x00000004
- -
- * - ``V4L2_H264_SPS_FLAG_GAPS_IN_FRAME_NUM_VALUE_ALLOWED``
- - 0x00000008
- -
- * - ``V4L2_H264_SPS_FLAG_FRAME_MBS_ONLY``
- - 0x00000010
- -
- * - ``V4L2_H264_SPS_FLAG_MB_ADAPTIVE_FRAME_FIELD``
- - 0x00000020
- -
- * - ``V4L2_H264_SPS_FLAG_DIRECT_8X8_INFERENCE``
- - 0x00000040
- -
-
-``V4L2_CID_MPEG_VIDEO_H264_PPS (struct)``
- Specifies the picture parameter set (as extracted from the
- bitstream) for the associated H264 slice data. This includes the
- necessary parameters for configuring a stateless hardware decoding
- pipeline for H264. The bitstream parameters are defined according
- to :ref:`h264`, section 7.4.2.2 "Picture Parameter Set RBSP
- Semantics". For further documentation, refer to the above
- specification, unless there is an explicit comment stating
- otherwise.
-
- .. note::
-
- This compound control is not yet part of the public kernel API and
- it is expected to change.
-
-.. c:type:: v4l2_ctrl_h264_pps
-
-.. cssclass:: longtable
-
-.. flat-table:: struct v4l2_ctrl_h264_pps
- :header-rows: 0
- :stub-columns: 0
- :widths: 1 1 2
-
- * - __u8
- - ``pic_parameter_set_id``
- -
- * - __u8
- - ``seq_parameter_set_id``
- -
- * - __u8
- - ``num_slice_groups_minus1``
- -
- * - __u8
- - ``num_ref_idx_l0_default_active_minus1``
- -
- * - __u8
- - ``num_ref_idx_l1_default_active_minus1``
- -
- * - __u8
- - ``weighted_bipred_idc``
- -
- * - __s8
- - ``pic_init_qp_minus26``
- -
- * - __s8
- - ``pic_init_qs_minus26``
- -
- * - __s8
- - ``chroma_qp_index_offset``
- -
- * - __s8
- - ``second_chroma_qp_index_offset``
- -
- * - __u16
- - ``flags``
- - See :ref:`Picture Parameter Set Flags <h264_pps_flags>`
-
-.. _h264_pps_flags:
-
-``Picture Parameter Set Flags``
-
-.. cssclass:: longtable
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
- :widths: 1 1 2
-
- * - ``V4L2_H264_PPS_FLAG_ENTROPY_CODING_MODE``
- - 0x00000001
- -
- * - ``V4L2_H264_PPS_FLAG_BOTTOM_FIELD_PIC_ORDER_IN_FRAME_PRESENT``
- - 0x00000002
- -
- * - ``V4L2_H264_PPS_FLAG_WEIGHTED_PRED``
- - 0x00000004
- -
- * - ``V4L2_H264_PPS_FLAG_DEBLOCKING_FILTER_CONTROL_PRESENT``
- - 0x00000008
- -
- * - ``V4L2_H264_PPS_FLAG_CONSTRAINED_INTRA_PRED``
- - 0x00000010
- -
- * - ``V4L2_H264_PPS_FLAG_REDUNDANT_PIC_CNT_PRESENT``
- - 0x00000020
- -
- * - ``V4L2_H264_PPS_FLAG_TRANSFORM_8X8_MODE``
- - 0x00000040
- -
- * - ``V4L2_H264_PPS_FLAG_SCALING_MATRIX_PRESENT``
- - 0x00000080
- - Indicates that ``V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX``
- must be used for this picture.
-
-``V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX (struct)``
- Specifies the scaling matrix (as extracted from the bitstream) for
- the associated H264 slice data. The bitstream parameters are
- defined according to :ref:`h264`, section 7.4.2.1.1.1 "Scaling
- List Semantics". For further documentation, refer to the above
- specification, unless there is an explicit comment stating
- otherwise.
-
- .. note::
-
- This compound control is not yet part of the public kernel API and
- it is expected to change.
-
-.. c:type:: v4l2_ctrl_h264_scaling_matrix
-
-.. cssclass:: longtable
-
-.. flat-table:: struct v4l2_ctrl_h264_scaling_matrix
- :header-rows: 0
- :stub-columns: 0
- :widths: 1 1 2
-
- * - __u8
- - ``scaling_list_4x4[6][16]``
- - Scaling matrix after applying the inverse scanning process.
- Expected list order is Intra Y, Intra Cb, Intra Cr, Inter Y,
- Inter Cb, Inter Cr. The values on each scaling list are
- expected in raster scan order.
- * - __u8
- - ``scaling_list_8x8[6][64]``
- - Scaling matrix after applying the inverse scanning process.
- Expected list order is Intra Y, Inter Y, Intra Cb, Inter Cb,
- Intra Cr, Inter Cr. The values on each scaling list are
- expected in raster scan order.
-
-``V4L2_CID_MPEG_VIDEO_H264_SLICE_PARAMS (struct)``
- Specifies the slice parameters (as extracted from the bitstream)
- for the associated H264 slice data. This includes the necessary
- parameters for configuring a stateless hardware decoding pipeline
- for H264. The bitstream parameters are defined according to
- :ref:`h264`, section 7.4.3 "Slice Header Semantics". For further
- documentation, refer to the above specification, unless there is
- an explicit comment stating otherwise.
-
- .. note::
-
- This compound control is not yet part of the public kernel API
- and it is expected to change.
-
-.. c:type:: v4l2_ctrl_h264_slice_params
-
-.. cssclass:: longtable
-
-.. flat-table:: struct v4l2_ctrl_h264_slice_params
- :header-rows: 0
- :stub-columns: 0
- :widths: 1 1 2
-
- * - __u32
- - ``header_bit_size``
- - Offset in bits to slice_data() from the beginning of this slice.
- * - __u32
- - ``first_mb_in_slice``
- -
- * - __u8
- - ``slice_type``
- -
- * - __u8
- - ``colour_plane_id``
- -
- * - __u8
- - ``redundant_pic_cnt``
- -
- * - __u8
- - ``cabac_init_idc``
- -
- * - __s8
- - ``slice_qp_delta``
- -
- * - __s8
- - ``slice_qs_delta``
- -
- * - __u8
- - ``disable_deblocking_filter_idc``
- -
- * - __s8
- - ``slice_alpha_c0_offset_div2``
- -
- * - __s8
- - ``slice_beta_offset_div2``
- -
- * - __u8
- - ``num_ref_idx_l0_active_minus1``
- - If num_ref_idx_active_override_flag is not set, this field must be
- set to the value of num_ref_idx_l0_default_active_minus1.
- * - __u8
- - ``num_ref_idx_l1_active_minus1``
- - If num_ref_idx_active_override_flag is not set, this field must be
- set to the value of num_ref_idx_l1_default_active_minus1.
- * - __u8
- - ``reserved``
- - Applications and drivers must set this to zero.
- * - struct :c:type:`v4l2_h264_reference`
- - ``ref_pic_list0[32]``
- - Reference picture list after applying the per-slice modifications
- * - struct :c:type:`v4l2_h264_reference`
- - ``ref_pic_list1[32]``
- - Reference picture list after applying the per-slice modifications
- * - __u32
- - ``flags``
- - See :ref:`Slice Parameter Flags <h264_slice_flags>`
-
-.. _h264_slice_flags:
-
-``Slice Parameter Set Flags``
-
-.. cssclass:: longtable
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
- :widths: 1 1 2
-
- * - ``V4L2_H264_SLICE_FLAG_DIRECT_SPATIAL_MV_PRED``
- - 0x00000001
- -
- * - ``V4L2_H264_SLICE_FLAG_SP_FOR_SWITCH``
- - 0x00000002
- -
-
-``V4L2_CID_MPEG_VIDEO_H264_PRED_WEIGHTS (struct)``
- Prediction weight table defined according to :ref:`h264`,
- section 7.4.3.2 "Prediction Weight Table Semantics".
- The prediction weight table must be passed by applications
- under the conditions explained in section 7.3.3 "Slice header
- syntax".
-
- .. note::
-
- This compound control is not yet part of the public kernel API and
- it is expected to change.
-
-.. c:type:: v4l2_ctrl_h264_pred_weights
-
-.. cssclass:: longtable
-
-.. flat-table:: struct v4l2_ctrl_h264_pred_weights
- :header-rows: 0
- :stub-columns: 0
- :widths: 1 1 2
-
- * - __u16
- - ``luma_log2_weight_denom``
- -
- * - __u16
- - ``chroma_log2_weight_denom``
- -
- * - struct :c:type:`v4l2_h264_weight_factors`
- - ``weight_factors[2]``
- - The weight factors at index 0 are the weight factors for the reference
- list 0, the one at index 1 for the reference list 1.
-
-.. c:type:: v4l2_h264_weight_factors
-
-.. cssclass:: longtable
-
-.. flat-table:: struct v4l2_h264_weight_factors
- :header-rows: 0
- :stub-columns: 0
- :widths: 1 1 2
-
- * - __s16
- - ``luma_weight[32]``
- -
- * - __s16
- - ``luma_offset[32]``
- -
- * - __s16
- - ``chroma_weight[32][2]``
- -
- * - __s16
- - ``chroma_offset[32][2]``
- -
-
-``Picture Reference``
-
-.. c:type:: v4l2_h264_reference
-
-.. cssclass:: longtable
-
-.. flat-table:: struct v4l2_h264_reference
- :header-rows: 0
- :stub-columns: 0
- :widths: 1 1 2
-
- * - __u8
- - ``fields``
- - Specifies how the picture is referenced. See :ref:`Reference Fields <h264_ref_fields>`
- * - __u8
- - ``index``
- - Index into the :c:type:`v4l2_ctrl_h264_decode_params`.dpb array.
-
-.. _h264_ref_fields:
-
-``Reference Fields``
-
-.. cssclass:: longtable
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
- :widths: 1 1 2
-
- * - ``V4L2_H264_TOP_FIELD_REF``
- - 0x1
- - The top field in field pair is used for short-term reference.
- * - ``V4L2_H264_BOTTOM_FIELD_REF``
- - 0x2
- - The bottom field in field pair is used for short-term reference.
- * - ``V4L2_H264_FRAME_REF``
- - 0x3
- - The frame (or the top/bottom fields, if it's a field pair)
- is used for short-term reference.
-
-``V4L2_CID_MPEG_VIDEO_H264_DECODE_PARAMS (struct)``
- Specifies the decode parameters (as extracted from the bitstream)
- for the associated H264 slice data. This includes the necessary
- parameters for configuring a stateless hardware decoding pipeline
- for H264. The bitstream parameters are defined according to
- :ref:`h264`. For further documentation, refer to the above
- specification, unless there is an explicit comment stating
- otherwise.
-
- .. note::
-
- This compound control is not yet part of the public kernel API and
- it is expected to change.
-
-.. c:type:: v4l2_ctrl_h264_decode_params
-
-.. cssclass:: longtable
-
-.. flat-table:: struct v4l2_ctrl_h264_decode_params
- :header-rows: 0
- :stub-columns: 0
- :widths: 1 1 2
-
- * - struct :c:type:`v4l2_h264_dpb_entry`
- - ``dpb[16]``
- -
- * - __u16
- - ``nal_ref_idc``
- - NAL reference ID value coming from the NAL Unit header
- * - __u16
- - ``frame_num``
- -
- * - __s32
- - ``top_field_order_cnt``
- - Picture Order Count for the coded top field
- * - __s32
- - ``bottom_field_order_cnt``
- - Picture Order Count for the coded bottom field
- * - __u16
- - ``idr_pic_id``
- -
- * - __u16
- - ``pic_order_cnt_lsb``
- -
- * - __s32
- - ``delta_pic_order_cnt_bottom``
- -
- * - __s32
- - ``delta_pic_order_cnt0``
- -
- * - __s32
- - ``delta_pic_order_cnt1``
- -
- * - __u32
- - ``dec_ref_pic_marking_bit_size``
- - Size in bits of the dec_ref_pic_marking() syntax element.
- * - __u32
- - ``pic_order_cnt_bit_size``
- - Combined size in bits of the picture order count related syntax
- elements: pic_order_cnt_lsb, delta_pic_order_cnt_bottom,
- delta_pic_order_cnt0, and delta_pic_order_cnt1.
- * - __u32
- - ``slice_group_change_cycle``
- -
- * - __u32
- - ``reserved``
- - Applications and drivers must set this to zero.
- * - __u32
- - ``flags``
- - See :ref:`Decode Parameters Flags <h264_decode_params_flags>`
-
-.. _h264_decode_params_flags:
-
-``Decode Parameters Flags``
-
-.. cssclass:: longtable
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
- :widths: 1 1 2
-
- * - ``V4L2_H264_DECODE_PARAM_FLAG_IDR_PIC``
- - 0x00000001
- - That picture is an IDR picture
- * - ``V4L2_H264_DECODE_PARAM_FLAG_FIELD_PIC``
- - 0x00000002
- -
- * - ``V4L2_H264_DECODE_PARAM_FLAG_BOTTOM_FIELD``
- - 0x00000004
- -
-
-.. c:type:: v4l2_h264_dpb_entry
-
-.. cssclass:: longtable
-
-.. flat-table:: struct v4l2_h264_dpb_entry
- :header-rows: 0
- :stub-columns: 0
- :widths: 1 1 2
-
- * - __u64
- - ``reference_ts``
- - Timestamp of the V4L2 capture buffer to use as reference, used
- with B-coded and P-coded frames. The timestamp refers to the
- ``timestamp`` field in struct :c:type:`v4l2_buffer`. Use the
- :c:func:`v4l2_timeval_to_ns()` function to convert the struct
- :c:type:`timeval` in struct :c:type:`v4l2_buffer` to a __u64.
- * - __u32
- - ``pic_num``
- -
- * - __u16
- - ``frame_num``
- -
- * - __u8
- - ``fields``
- - Specifies how the DPB entry is referenced. See :ref:`Reference Fields <h264_ref_fields>`
- * - __u8
- - ``reserved[5]``
- - Applications and drivers must set this to zero.
- * - __s32
- - ``top_field_order_cnt``
- -
- * - __s32
- - ``bottom_field_order_cnt``
- -
- * - __u32
- - ``flags``
- - See :ref:`DPB Entry Flags <h264_dpb_flags>`
-
-.. _h264_dpb_flags:
-
-``DPB Entries Flags``
-
-.. cssclass:: longtable
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
- :widths: 1 1 2
-
- * - ``V4L2_H264_DPB_ENTRY_FLAG_VALID``
- - 0x00000001
- - The DPB entry is valid (non-empty) and should be considered.
- * - ``V4L2_H264_DPB_ENTRY_FLAG_ACTIVE``
- - 0x00000002
- - The DPB entry is used for reference.
- * - ``V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM``
- - 0x00000004
- - The DPB entry is used for long-term reference.
- * - ``V4L2_H264_DPB_ENTRY_FLAG_FIELD``
- - 0x00000008
- - The DPB entry is a single field or a complementary field pair.
-
-``V4L2_CID_MPEG_VIDEO_H264_DECODE_MODE (enum)``
- Specifies the decoding mode to use. Currently exposes slice-based and
- frame-based decoding but new modes might be added later on.
- This control is used as a modifier for V4L2_PIX_FMT_H264_SLICE
- pixel format. Applications that support V4L2_PIX_FMT_H264_SLICE
- are required to set this control in order to specify the decoding mode
- that is expected for the buffer.
- Drivers may expose a single or multiple decoding modes, depending
- on what they can support.
-
- .. note::
-
- This menu control is not yet part of the public kernel API and
- it is expected to change.
-
-.. c:type:: v4l2_mpeg_video_h264_decode_mode
-
-.. cssclass:: longtable
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
- :widths: 1 1 2
-
- * - ``V4L2_MPEG_VIDEO_H264_DECODE_MODE_SLICE_BASED``
- - 0
- - Decoding is done at the slice granularity.
- The OUTPUT buffer must contain a single slice.
- When this mode is selected, the ``V4L2_CID_MPEG_VIDEO_H264_SLICE_PARAMS``
- control shall be set. When multiple slices compose a frame,
- use of ``V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF`` flag
- is required.
- * - ``V4L2_MPEG_VIDEO_H264_DECODE_MODE_FRAME_BASED``
- - 1
- - Decoding is done at the frame granularity,
- The OUTPUT buffer must contain all slices needed to decode the
- frame. The OUTPUT buffer must also contain both fields.
- This mode will be supported by devices that
- parse the slice(s) header(s) in hardware. When this mode is
- selected, the ``V4L2_CID_MPEG_VIDEO_H264_SLICE_PARAMS``
- control shall not be set.
-
-``V4L2_CID_MPEG_VIDEO_H264_START_CODE (enum)``
- Specifies the H264 slice start code expected for each slice.
- This control is used as a modifier for V4L2_PIX_FMT_H264_SLICE
- pixel format. Applications that support V4L2_PIX_FMT_H264_SLICE
- are required to set this control in order to specify the start code
- that is expected for the buffer.
- Drivers may expose a single or multiple start codes, depending
- on what they can support.
-
- .. note::
-
- This menu control is not yet part of the public kernel API and
- it is expected to change.
-
-.. c:type:: v4l2_mpeg_video_h264_start_code
-
-.. cssclass:: longtable
-
-.. flat-table::
- :header-rows: 0
- :stub-columns: 0
- :widths: 1 1 2
-
- * - ``V4L2_MPEG_VIDEO_H264_START_CODE_NONE``
- - 0
- - Selecting this value specifies that H264 slices are passed
- to the driver without any start code.
- * - ``V4L2_MPEG_VIDEO_H264_START_CODE_ANNEX_B``
- - 1
- - Selecting this value specifies that H264 slices are expected
- to be prefixed by Annex B start codes. According to :ref:`h264`
- valid start codes can be 3-bytes 0x000001 or 4-bytes 0x00000001.
-
.. _v4l2-mpeg-mpeg2:
``V4L2_CID_MPEG_VIDEO_MPEG2_SLICE_PARAMS (struct)``
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-compressed.rst b/Documentation/userspace-api/media/v4l/pixfmt-compressed.rst
index d585909bc4e2..32b91ce0f0d9 100644
--- a/Documentation/userspace-api/media/v4l/pixfmt-compressed.rst
+++ b/Documentation/userspace-api/media/v4l/pixfmt-compressed.rst
@@ -59,14 +59,14 @@ Compressed Formats
This format is adapted for stateless video decoders that implement an
H264 pipeline (using the :ref:`mem2mem` and :ref:`media-request-api`).
This pixelformat has two modifiers that must be set at least once
- through the ``V4L2_CID_MPEG_VIDEO_H264_DECODE_MODE``
- and ``V4L2_CID_MPEG_VIDEO_H264_START_CODE`` controls.
+ through the ``V4L2_CID_STATELESS_H264_DECODE_MODE``
+ and ``V4L2_CID_STATELESS_H264_START_CODE`` controls.
In addition, metadata associated with the frame to decode are
- required to be passed through the ``V4L2_CID_MPEG_VIDEO_H264_SPS``,
- ``V4L2_CID_MPEG_VIDEO_H264_PPS``,
- ``V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX``,
- ``V4L2_CID_MPEG_VIDEO_H264_SLICE_PARAMS`` and
- ``V4L2_CID_MPEG_VIDEO_H264_DECODE_PARAMS`` controls. See the
+ required to be passed through the ``V4L2_CID_STATELESS_H264_SPS``,
+ ``V4L2_CID_STATELESS_H264_PPS``,
+ ``V4L2_CID_STATELESS_H264_SCALING_MATRIX``,
+ ``V4L2_CID_STATELESS_H264_SLICE_PARAMS`` and
+ ``V4L2_CID_STATELESS_H264_DECODE_PARAMS`` controls. See the
:ref:`associated Codec Control IDs <v4l2-mpeg-h264>`. Exactly
one output and one capture buffer must be provided for use
with this pixel format. The output buffer must contain the
--
2.27.0