[PATCH RESEND net-next 18/18] net: phy: adin: remove the use of the .ack_interrupt()

From: Ioana Ciornei
Date: Fri Nov 13 2020 - 11:53:29 EST


From: Ioana Ciornei <ioana.ciornei@xxxxxxx>

In preparation of removing the .ack_interrupt() callback, we must replace
its occurrences (aka phy_clear_interrupt), from the 2 places where it is
called from (phy_enable_interrupts and phy_disable_interrupts), with
equivalent functionality.

This means that clearing interrupts now becomes something that the PHY
driver is responsible of doing, before enabling interrupts and after
clearing them. Make this driver follow the new contract.

Cc: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
Signed-off-by: Ioana Ciornei <ioana.ciornei@xxxxxxx>
---
drivers/net/phy/adin.c | 25 ++++++++++++++++++-------
1 file changed, 18 insertions(+), 7 deletions(-)

diff --git a/drivers/net/phy/adin.c b/drivers/net/phy/adin.c
index ba24434b867d..55a0b91816e2 100644
--- a/drivers/net/phy/adin.c
+++ b/drivers/net/phy/adin.c
@@ -471,12 +471,25 @@ static int adin_phy_ack_intr(struct phy_device *phydev)

static int adin_phy_config_intr(struct phy_device *phydev)
{
- if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
- return phy_set_bits(phydev, ADIN1300_INT_MASK_REG,
- ADIN1300_INT_MASK_EN);
+ int err;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+ err = adin_phy_ack_intr(phydev);
+ if (err)
+ return err;
+
+ err = phy_set_bits(phydev, ADIN1300_INT_MASK_REG,
+ ADIN1300_INT_MASK_EN);
+ } else {
+ err = phy_clear_bits(phydev, ADIN1300_INT_MASK_REG,
+ ADIN1300_INT_MASK_EN);
+ if (err)
+ return err;
+
+ err = adin_phy_ack_intr(phydev);
+ }

- return phy_clear_bits(phydev, ADIN1300_INT_MASK_REG,
- ADIN1300_INT_MASK_EN);
+ return err;
}

static irqreturn_t adin_phy_handle_interrupt(struct phy_device *phydev)
@@ -895,7 +908,6 @@ static struct phy_driver adin_driver[] = {
.read_status = adin_read_status,
.get_tunable = adin_get_tunable,
.set_tunable = adin_set_tunable,
- .ack_interrupt = adin_phy_ack_intr,
.config_intr = adin_phy_config_intr,
.handle_interrupt = adin_phy_handle_interrupt,
.get_sset_count = adin_get_sset_count,
@@ -919,7 +931,6 @@ static struct phy_driver adin_driver[] = {
.read_status = adin_read_status,
.get_tunable = adin_get_tunable,
.set_tunable = adin_set_tunable,
- .ack_interrupt = adin_phy_ack_intr,
.config_intr = adin_phy_config_intr,
.handle_interrupt = adin_phy_handle_interrupt,
.get_sset_count = adin_get_sset_count,
--
2.28.0