Re: [PATCH] hwmon: fix corsair-psu fan rpm calculation

From: Guenter Roeck
Date: Fri Nov 13 2020 - 10:01:06 EST


On Fri, Nov 13, 2020 at 01:19:54PM +0100, Wilken Gottwalt wrote:
> The correct fan rpm value is also a LINEAR11 value but without a factor.
> Verified by using the fan test button on the psu to let the fan spin up
> to maximum for some seconds.
>
> Fixes: 933222c98445 ("hwmon: (corsair-psu) fix unintentional sign extension issue")
> Signed-off-by: Wilken Gottwalt <wilken.gottwalt@xxxxxxxxxx>

Applied.

Thanks,
Guenter

> ---
> drivers/hwmon/corsair-psu.c | 7 +------
> 1 file changed, 1 insertion(+), 6 deletions(-)
>
> diff --git a/drivers/hwmon/corsair-psu.c b/drivers/hwmon/corsair-psu.c
> index 5d19a888231a..99494056f4bd 100644
> --- a/drivers/hwmon/corsair-psu.c
> +++ b/drivers/hwmon/corsair-psu.c
> @@ -252,12 +252,7 @@ static int corsairpsu_get_value(struct corsairpsu_data *priv, u8 cmd, u8 rail, l
> *val = corsairpsu_linear11_to_int(tmp & 0xFFFF) * 1000;
> break;
> case PSU_CMD_FAN:
> - /*
> - * this value is best guess, so the calculated value could be wrong, it is hard
> - * to ge the fan to spin in these semi-passive power supplies, which need a
> - * quite high load to do so
> - */
> - *val = ((tmp & 0xFF) << 8) + ((tmp >> 8) & 0xFF);
> + *val = corsairpsu_linear11_to_int(tmp & 0xFFFF);
> break;
> case PSU_CMD_RAIL_WATTS:
> case PSU_CMD_TOTAL_WATTS: