Re: [PATCH net-next v2 05/11] dt-bindings: net: dsa: microchip,ksz: add interrupt property

[Vladimir Oltean]

On Thu, Nov 12, 2020 at 04:35:31PM +0100, Christian Eggers wrote:
> The devices have an optional interrupt line.
>
> Signed-off-by: Christian Eggers <ceggers@xxxxxxx>
> ---
>  .../devicetree/bindings/net/dsa/microchip,ksz.yaml        | 8 ++++++++
>  1 file changed, 8 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
> index 431ca5c498a8..b2613d6c97cf 100644
> --- a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
> +++ b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
> @@ -35,6 +35,11 @@ properties:
>        Should be a gpio specifier for a reset line.
>      maxItems: 1
>
> +  interrupts:
> +    description:
> +      Interrupt specifier for the INTRP_N line from the device.
> +    maxItems: 1
> +
>    microchip,synclko-125:
>      $ref: /schemas/types.yaml#/definitions/flag
>      description:
> @@ -47,6 +52,7 @@ required:
>  examples:
>    - |
>      #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
>
>      // Ethernet switch connected via SPI to the host, CPU port wired to eth0:
>      eth0 {
> @@ -68,6 +74,8 @@ examples:
>              compatible = "microchip,ksz9477";
>              reg = <0>;
>              reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
> +            interrupt-parent = <&gpio5>;
> +            interrupts = <1 IRQ_TYPE_LEVEL_LOW>;  /* INTRP_N line */

Isn't it preferable to use this syntax?

		interrupts-extended = <&gpio5 1 IRQ_TYPE_LEVEL_LOW>;  /* INTRP_N line */