Re: [PATCH 05/10] ARM: dts: BCM5301X: Provide defaults ports container node

[Florian Fainelli]

On 11/10/20 2:12 PM, Vladimir Oltean wrote:
> On Mon, Nov 09, 2020 at 07:31:08PM -0800, Florian Fainelli wrote:
>> Provide an empty 'ports' container node with the correct #address-cells
>> and #size-cells properties. This silences the following warning:
>>
>> arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dt.yaml:
>> ethernet-switch@18007000: 'oneOf' conditional failed, one must be fixed:
>>         'ports' is a required property
>>         'ethernet-ports' is a required property
>>         From schema:
>> Documentation/devicetree/bindings/net/dsa/b53.yaml
>>
>> Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
>> ---
>>  arch/arm/boot/dts/bcm5301x.dtsi | 4 ++++
>>  1 file changed, 4 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
>> index 807580dd89f5..89993a8a6765 100644
>> --- a/arch/arm/boot/dts/bcm5301x.dtsi
>> +++ b/arch/arm/boot/dts/bcm5301x.dtsi
>> @@ -489,6 +489,10 @@ srab: ethernet-switch@18007000 {
>>  		status = "disabled";
>>  
>>  		/* ports are defined in board DTS */
>> +		ports {
>> +			#address-cells = <1>;
>> +			#size-cells = <0>;
>> +		};
> 
> This look a bit 'lone wolf' here. Not sure how much time you intend to
> spend on this, but FWIW, others prefer to declare all ports in the SoC
> DTSI with status = "disabled", and just enable the ones used per-board,
> and add labels and PHY handles also per-board. Example: fsl-ls1028a.dtsi
> and fsl-ls1028a-rdb.dts.

That's a good suggestion, I could do that.
-- 
Florian