[PATCH 1/1] ARM: dts: stm32: adjust USB OTG gadget fifo sizes in stm32mp151

From: Amelie Delaunay
Date: Tue Nov 10 2020 - 08:11:11 EST


Defaut use case on stm32mp151 USB OTG is ethernet gadget, using EP1 bulk
endpoint (MPS=512 bytes) and EP2 interrupt endpoint (MPS=16 bytes).
This patch optimizes USB OTG FIFO sizes accordingly.

Signed-off-by: Amelie Delaunay <amelie.delaunay@xxxxxx>
---
arch/arm/boot/dts/stm32mp151.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
index 6ffcf06dc0e8..928e31db1526 100644
--- a/arch/arm/boot/dts/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/stm32mp151.dtsi
@@ -1070,9 +1070,9 @@
resets = <&rcc USBO_R>;
reset-names = "dwc2";
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
- g-rx-fifo-size = <256>;
+ g-rx-fifo-size = <512>;
g-np-tx-fifo-size = <32>;
- g-tx-fifo-size = <128 128 64 64 64 64 32 32>;
+ g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
dr_mode = "otg";
usb33d-supply = <&usb33>;
status = "disabled";
--
2.17.1