Re: [PATCH v2] ACPI: Fix whitespace inconsistencies

From: Rafael J. Wysocki
Date: Mon Nov 09 2020 - 13:24:05 EST

Next message: John Wood: "Re: [PATCH v2 7/8] Documentation: Add documentation for the Brute LSM"
Previous message: Lee Jones: "[PATCH v3 07/23] mtd: spi-nor: hisi-sfc: Demote non-conformant kernel-doc"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Thu, Nov 5, 2020 at 3:06 AM Maximilian Luz <luzmaximilian@xxxxxxxxx> wrote:
>
> Replaces spaces with tabs where spaces have been (inconsistently) used
> for indentation and removes trailing whitespaces.
>
> Signed-off-by: Maximilian Luz <luzmaximilian@xxxxxxxxx>
> ---
>
> Was previously: ACPI: Remove trailing whitespace
>
> Changes in v2:
> - Use checkpatch to scan for inconsistent indentations and fix them
> too, i.e. replace spaces with tabs where appropriate.

Applied as 5.10-rc material, thanks!

>
> ---
> drivers/acpi/acpi_video.c | 6 +++---
> drivers/acpi/battery.c | 2 +-
> drivers/acpi/event.c | 2 +-
> drivers/acpi/internal.h | 2 +-
> drivers/acpi/nfit/core.c | 10 +++++-----
> drivers/acpi/pci_irq.c | 2 +-
> drivers/acpi/pci_link.c | 12 ++++++------
> drivers/acpi/pci_mcfg.c | 2 +-
> drivers/acpi/power.c | 6 +++---
> drivers/acpi/processor_perflib.c | 6 +++---
> drivers/acpi/sbs.c | 2 +-
> drivers/acpi/sbshc.c | 2 +-
> drivers/acpi/sbshc.h | 6 +++---
> drivers/acpi/video_detect.c | 16 ++++++++--------
> drivers/acpi/wakeup.c | 4 ++--
> 15 files changed, 40 insertions(+), 40 deletions(-)
>
> diff --git a/drivers/acpi/acpi_video.c b/drivers/acpi/acpi_video.c
> index bc96457c9e25..a322a7bd286b 100644
> --- a/drivers/acpi/acpi_video.c
> +++ b/drivers/acpi/acpi_video.c
> @@ -578,7 +578,7 @@ acpi_video_bqc_value_to_level(struct acpi_video_device *device,
> ACPI_VIDEO_FIRST_LEVEL - 1 - bqc_value;
>
> level = device->brightness->levels[bqc_value +
> - ACPI_VIDEO_FIRST_LEVEL];
> + ACPI_VIDEO_FIRST_LEVEL];
> } else {
> level = bqc_value;
> }
> @@ -990,8 +990,8 @@ acpi_video_init_brightness(struct acpi_video_device *device)
> goto out_free_levels;
>
> ACPI_DEBUG_PRINT((ACPI_DB_INFO,
> - "found %d brightness levels\n",
> - br->count - ACPI_VIDEO_FIRST_LEVEL));
> + "found %d brightness levels\n",
> + br->count - ACPI_VIDEO_FIRST_LEVEL));
> return 0;
>
> out_free_levels:
> diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
> index cab4af532f36..08ee1c7b12e0 100644
> --- a/drivers/acpi/battery.c
> +++ b/drivers/acpi/battery.c
> @@ -987,7 +987,7 @@ static int acpi_battery_update(struct acpi_battery *battery, bool resume)
> */
> if ((battery->state & ACPI_BATTERY_STATE_CRITICAL) ||
> (test_bit(ACPI_BATTERY_ALARM_PRESENT, &battery->flags) &&
> - (battery->capacity_now <= battery->alarm)))
> + (battery->capacity_now <= battery->alarm)))
> acpi_pm_wakeup_event(&battery->device->dev);
>
> return result;
> diff --git a/drivers/acpi/event.c b/drivers/acpi/event.c
> index 170643927044..92e59f45329b 100644
> --- a/drivers/acpi/event.c
> +++ b/drivers/acpi/event.c
> @@ -31,7 +31,7 @@ int acpi_notifier_call_chain(struct acpi_device *dev, u32 type, u32 data)
> event.type = type;
> event.data = data;
> return (blocking_notifier_call_chain(&acpi_chain_head, 0, (void *)&event)
> - == NOTIFY_BAD) ? -EINVAL : 0;
> + == NOTIFY_BAD) ? -EINVAL : 0;
> }
> EXPORT_SYMBOL(acpi_notifier_call_chain);
>
> diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h
> index 43411a7457cd..e3638bafb941 100644
> --- a/drivers/acpi/internal.h
> +++ b/drivers/acpi/internal.h
> @@ -134,7 +134,7 @@ int acpi_add_power_resource(acpi_handle handle);
> void acpi_power_add_remove_device(struct acpi_device *adev, bool add);
> int acpi_power_wakeup_list_init(struct list_head *list, int *system_level);
> int acpi_device_sleep_wake(struct acpi_device *dev,
> - int enable, int sleep_state, int dev_state);
> + int enable, int sleep_state, int dev_state);
> int acpi_power_get_inferred_state(struct acpi_device *device, int *state);
> int acpi_power_on_resources(struct acpi_device *device, int state);
> int acpi_power_transition(struct acpi_device *device, int state);
> diff --git a/drivers/acpi/nfit/core.c b/drivers/acpi/nfit/core.c
> index 3a3c209ed3d3..442608220b5c 100644
> --- a/drivers/acpi/nfit/core.c
> +++ b/drivers/acpi/nfit/core.c
> @@ -2175,10 +2175,10 @@ static int acpi_nfit_register_dimms(struct acpi_nfit_desc *acpi_desc)
> * these commands.
> */
> enum nfit_aux_cmds {
> - NFIT_CMD_TRANSLATE_SPA = 5,
> - NFIT_CMD_ARS_INJECT_SET = 7,
> - NFIT_CMD_ARS_INJECT_CLEAR = 8,
> - NFIT_CMD_ARS_INJECT_GET = 9,
> + NFIT_CMD_TRANSLATE_SPA = 5,
> + NFIT_CMD_ARS_INJECT_SET = 7,
> + NFIT_CMD_ARS_INJECT_CLEAR = 8,
> + NFIT_CMD_ARS_INJECT_GET = 9,
> };
>
> static void acpi_nfit_init_dsms(struct acpi_nfit_desc *acpi_desc)
> @@ -2632,7 +2632,7 @@ static int acpi_nfit_blk_region_enable(struct nvdimm_bus *nvdimm_bus,
> nfit_blk->bdw_offset = nfit_mem->bdw->offset;
> mmio = &nfit_blk->mmio[BDW];
> mmio->addr.base = devm_nvdimm_memremap(dev, nfit_mem->spa_bdw->address,
> - nfit_mem->spa_bdw->length, nd_blk_memremap_flags(ndbr));
> + nfit_mem->spa_bdw->length, nd_blk_memremap_flags(ndbr));
> if (!mmio->addr.base) {
> dev_dbg(dev, "%s failed to map bdw\n",
> nvdimm_name(nvdimm));
> diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
> index dea8a60e18a4..14ee631cb7cf 100644
> --- a/drivers/acpi/pci_irq.c
> +++ b/drivers/acpi/pci_irq.c
> @@ -175,7 +175,7 @@ static int acpi_pci_irq_check_entry(acpi_handle handle, struct pci_dev *dev,
> * configure the IRQ assigned to this slot|dev|pin. The 'source_index'
> * indicates which resource descriptor in the resource template (of
> * the link device) this interrupt is allocated from.
> - *
> + *
> * NOTE: Don't query the Link Device for IRQ information at this time
> * because Link Device enumeration may not have occurred yet
> * (e.g. exists somewhere 'below' this _PRT entry in the ACPI
> diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c
> index 606da5d77ad3..fb4c5632a232 100644
> --- a/drivers/acpi/pci_link.c
> +++ b/drivers/acpi/pci_link.c
> @@ -6,8 +6,8 @@
> * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@xxxxxxxxx>
> * Copyright (C) 2002 Dominik Brodowski <devel@xxxxxxxx>
> *
> - * TBD:
> - * 1. Support more than one IRQ resource entry per link device (index).
> + * TBD:
> + * 1. Support more than one IRQ resource entry per link device (index).
> * 2. Implement start/stop mechanism and use ACPI Bus Driver facilities
> * for IRQ management (e.g. start()->_SRS).
> */
> @@ -249,8 +249,8 @@ static int acpi_pci_link_get_current(struct acpi_pci_link *link)
> }
> }
>
> - /*
> - * Query and parse _CRS to get the current IRQ assignment.
> + /*
> + * Query and parse _CRS to get the current IRQ assignment.
> */
>
> status = acpi_walk_resources(link->device->handle, METHOD_NAME__CRS,
> @@ -396,7 +396,7 @@ static int acpi_pci_link_set(struct acpi_pci_link *link, int irq)
> /*
> * "acpi_irq_balance" (default in APIC mode) enables ACPI to use PIC Interrupt
> * Link Devices to move the PIRQs around to minimize sharing.
> - *
> + *
> * "acpi_irq_nobalance" (default in PIC mode) tells ACPI not to move any PIC IRQs
> * that the BIOS has already set to active. This is necessary because
> * ACPI has no automatic means of knowing what ISA IRQs are used. Note that
> @@ -414,7 +414,7 @@ static int acpi_pci_link_set(struct acpi_pci_link *link, int irq)
> *
> * Note that PCI IRQ routers have a list of possible IRQs,
> * which may not include the IRQs this table says are available.
> - *
> + *
> * Since this heuristic can't tell the difference between a link
> * that no device will attach to, vs. a link which may be shared
> * by multiple active devices -- it is not optimal.
> diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
> index 7ddd57abadd1..95f23acd5b80 100644
> --- a/drivers/acpi/pci_mcfg.c
> +++ b/drivers/acpi/pci_mcfg.c
> @@ -173,7 +173,7 @@ static int pci_mcfg_quirk_matches(struct mcfg_fixup *f, u16 segment,
> {
> if (!memcmp(f->oem_id, mcfg_oem_id, ACPI_OEM_ID_SIZE) &&
> !memcmp(f->oem_table_id, mcfg_oem_table_id,
> - ACPI_OEM_TABLE_ID_SIZE) &&
> + ACPI_OEM_TABLE_ID_SIZE) &&
> f->oem_revision == mcfg_oem_revision &&
> f->segment == segment &&
> resource_contains(&f->bus_range, bus_range))
> diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c
> index 837b875d075e..8048da85b7e0 100644
> --- a/drivers/acpi/power.c
> +++ b/drivers/acpi/power.c
> @@ -13,7 +13,7 @@
> * 1. via "Device Specific (D-State) Control"
> * 2. via "Power Resource Control".
> * The code below deals with ACPI Power Resources control.
> - *
> + *
> * An ACPI "power resource object" represents a software controllable power
> * plane, clock plane, or other resource depended on by a device.
> *
> @@ -645,7 +645,7 @@ int acpi_power_wakeup_list_init(struct list_head *list, int *system_level_p)
> * -ENODEV if the execution of either _DSW or _PSW has failed
> */
> int acpi_device_sleep_wake(struct acpi_device *dev,
> - int enable, int sleep_state, int dev_state)
> + int enable, int sleep_state, int dev_state)
> {
> union acpi_object in_arg[3];
> struct acpi_object_list arg_list = { 3, in_arg };
> @@ -690,7 +690,7 @@ int acpi_device_sleep_wake(struct acpi_device *dev,
>
> /*
> * Prepare a wakeup device, two steps (Ref ACPI 2.0:P229):
> - * 1. Power on the power resources required for the wakeup device
> + * 1. Power on the power resources required for the wakeup device
> * 2. Execute _DSW (Device Sleep Wake) or (deprecated in ACPI 3.0) _PSW (Power
> * State Wake) for the device, if present
> */
> diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c
> index 5909e8fa4013..b04a68950ff1 100644
> --- a/drivers/acpi/processor_perflib.c
> +++ b/drivers/acpi/processor_perflib.c
> @@ -354,7 +354,7 @@ static int acpi_processor_get_performance_states(struct acpi_processor *pr)
> (u32) px->control, (u32) px->status));
>
> /*
> - * Check that ACPI's u64 MHz will be valid as u32 KHz in cpufreq
> + * Check that ACPI's u64 MHz will be valid as u32 KHz in cpufreq
> */
> if (!px->core_frequency ||
> ((u32)(px->core_frequency * 1000) !=
> @@ -627,7 +627,7 @@ int acpi_processor_preregister_performance(
> goto err_ret;
>
> /*
> - * Now that we have _PSD data from all CPUs, lets setup P-state
> + * Now that we have _PSD data from all CPUs, lets setup P-state
> * domain info.
> */
> for_each_possible_cpu(i) {
> @@ -693,7 +693,7 @@ int acpi_processor_preregister_performance(
> if (match_pdomain->domain != pdomain->domain)
> continue;
>
> - match_pr->performance->shared_type =
> + match_pr->performance->shared_type =
> pr->performance->shared_type;
> cpumask_copy(match_pr->performance->shared_cpu_map,
> pr->performance->shared_cpu_map);
> diff --git a/drivers/acpi/sbs.c b/drivers/acpi/sbs.c
> index f158b8c30113..e6d9f4de2800 100644
> --- a/drivers/acpi/sbs.c
> +++ b/drivers/acpi/sbs.c
> @@ -366,7 +366,7 @@ static int acpi_battery_get_state(struct acpi_battery *battery)
> state_readers[i].mode,
> ACPI_SBS_BATTERY,
> state_readers[i].command,
> - (u8 *)battery +
> + (u8 *)battery +
> state_readers[i].offset);
> if (result)
> goto end;
> diff --git a/drivers/acpi/sbshc.c b/drivers/acpi/sbshc.c
> index 87b74e9015e5..53c2862c4c75 100644
> --- a/drivers/acpi/sbshc.c
> +++ b/drivers/acpi/sbshc.c
> @@ -176,7 +176,7 @@ int acpi_smbus_write(struct acpi_smb_hc *hc, u8 protocol, u8 address,
> EXPORT_SYMBOL_GPL(acpi_smbus_write);
>
> int acpi_smbus_register_callback(struct acpi_smb_hc *hc,
> - smbus_alarm_callback callback, void *context)
> + smbus_alarm_callback callback, void *context)
> {
> mutex_lock(&hc->lock);
> hc->callback = callback;
> diff --git a/drivers/acpi/sbshc.h b/drivers/acpi/sbshc.h
> index c3522bb82792..695c390e2884 100644
> --- a/drivers/acpi/sbshc.h
> +++ b/drivers/acpi/sbshc.h
> @@ -24,9 +24,9 @@ enum acpi_sbs_device_addr {
> typedef void (*smbus_alarm_callback)(void *context);
>
> extern int acpi_smbus_read(struct acpi_smb_hc *hc, u8 protocol, u8 address,
> - u8 command, u8 * data);
> + u8 command, u8 *data);
> extern int acpi_smbus_write(struct acpi_smb_hc *hc, u8 protocol, u8 slave_address,
> - u8 command, u8 * data, u8 length);
> + u8 command, u8 *data, u8 length);
> extern int acpi_smbus_register_callback(struct acpi_smb_hc *hc,
> - smbus_alarm_callback callback, void *context);
> + smbus_alarm_callback callback, void *context);
> extern int acpi_smbus_unregister_callback(struct acpi_smb_hc *hc);
> diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
> index 3a032afd9d05..4f5463b2a217 100644
> --- a/drivers/acpi/video_detect.c
> +++ b/drivers/acpi/video_detect.c
> @@ -178,14 +178,14 @@ static const struct dmi_system_id video_detect_dmi_table[] = {
> DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X201s"),
> },
> },
> - {
> - .callback = video_detect_force_video,
> - .ident = "ThinkPad X201T",
> - .matches = {
> - DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
> - DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X201T"),
> - },
> - },
> + {
> + .callback = video_detect_force_video,
> + .ident = "ThinkPad X201T",
> + .matches = {
> + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
> + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X201T"),
> + },
> + },
>
> /* The native backlight controls do not work on some older machines */
> {
> diff --git a/drivers/acpi/wakeup.c b/drivers/acpi/wakeup.c
> index f89dd9a99e6e..b02bf770aead 100644
> --- a/drivers/acpi/wakeup.c
> +++ b/drivers/acpi/wakeup.c
> @@ -44,7 +44,7 @@ void acpi_enable_wakeup_devices(u8 sleep_state)
> if (!dev->wakeup.flags.valid
> || sleep_state > (u32) dev->wakeup.sleep_state
> || !(device_may_wakeup(&dev->dev)
> - || dev->wakeup.prepare_count))
> + || dev->wakeup.prepare_count))
> continue;
>
> if (device_may_wakeup(&dev->dev))
> @@ -69,7 +69,7 @@ void acpi_disable_wakeup_devices(u8 sleep_state)
> if (!dev->wakeup.flags.valid
> || sleep_state > (u32) dev->wakeup.sleep_state
> || !(device_may_wakeup(&dev->dev)
> - || dev->wakeup.prepare_count))
> + || dev->wakeup.prepare_count))
> continue;
>
> acpi_set_gpe_wake_mask(dev->wakeup.gpe_device, dev->wakeup.gpe_number,
> --
> 2.29.2
>

Next message: John Wood: "Re: [PATCH v2 7/8] Documentation: Add documentation for the Brute LSM"
Previous message: Lee Jones: "[PATCH v3 07/23] mtd: spi-nor: hisi-sfc: Demote non-conformant kernel-doc"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]