[PATCH net RESEND] arm64: dts: fsl-ls1028a-kontron-sl28: specify in-band mode for ENETC

[Michael Walle]

Since commit 71b77a7a27a3 ("enetc: Migrate to PHYLINK and PCS_LYNX") the
network port of the Kontron sl28 board is broken. After the migration to
phylink the device tree has to specify the in-band-mode property. Add
it.

Fixes: 71b77a7a27a3 ("enetc: Migrate to PHYLINK and PCS_LYNX")
Suggested-by: Vladimir Oltean <vladimir.oltean@xxxxxxx>
Signed-off-by: Michael Walle <michael@xxxxxxxx>
Reviewed-by: Vladimir Oltean <vladimir.oltean@xxxxxxx>
---
Forgot to add the netdev@ mailinglist in my former submission.

>From my previous mail:
> Ping. will this go through the net queue or Shawn's queue. In any case,
> it should make it into a fixes queue, because this board is currently
> broken in 5.10-rc2.

 arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
index 17a2f5dacc3f..54ff6f7c2477 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
@@ -79,6 +79,7 @@
 &enetc_port0 {
 	phy-handle = <&phy0>;
 	phy-connection-type = "sgmii";
+	managed = "in-band-status";
 	status = "okay";
 
 	mdio {
-- 
2.20.1