Re: [PATCH net-next 00/19] net: phy: add support for shared interrupts (part 1)

From: Ioana Ciornei
Date: Sat Oct 31 2020 - 01:27:22 EST


On Fri, Oct 30, 2020 at 10:56:24PM +0100, Heiner Kallweit wrote:
> On 29.10.2020 11:07, Ioana Ciornei wrote:
> > From: Ioana Ciornei <ioana.ciornei@xxxxxxx>
> >
> > This patch set aims to actually add support for shared interrupts in
> > phylib and not only for multi-PHY devices. While we are at it,
> > streamline the interrupt handling in phylib.
> >
> > For a bit of context, at the moment, there are multiple phy_driver ops
> > that deal with this subject:
> >
> > - .config_intr() - Enable/disable the interrupt line.
> >
> > - .ack_interrupt() - Should quiesce any interrupts that may have been
> > fired. It's also used by phylib in conjunction with .config_intr() to
> > clear any pending interrupts after the line was disabled, and before
> > it is going to be enabled.
> >
> > - .did_interrupt() - Intended for multi-PHY devices with a shared IRQ
> > line and used by phylib to discern which PHY from the package was the
> > one that actually fired the interrupt.
> >
> > - .handle_interrupt() - Completely overrides the default interrupt
> > handling logic from phylib. The PHY driver is responsible for checking
> > if any interrupt was fired by the respective PHY and choose
> > accordingly if it's the one that should trigger the link state machine.
> >
> >>From my point of view, the interrupt handling in phylib has become
> > somewhat confusing with all these callbacks that actually read the same
> > PHY register - the interrupt status. A more streamlined approach would
> > be to just move the responsibility to write an interrupt handler to the
> > driver (as any other device driver does) and make .handle_interrupt()
> > the only way to deal with interrupts.
> >
> > Another advantage with this approach would be that phylib would gain
> > support for shared IRQs between different PHY (not just multi-PHY
> > devices), something which at the moment would require extending every
> > PHY driver anyway in order to implement their .did_interrupt() callback
> > and duplicate the same logic as in .ack_interrupt(). The disadvantage
> > of making .did_interrupt() mandatory would be that we are slightly
> > changing the semantics of the phylib API and that would increase
> > confusion instead of reducing it.
> >
> > What I am proposing is the following:
> >
> > - As a first step, make the .ack_interrupt() callback optional so that
> > we do not break any PHY driver amid the transition.
> >
> > - Every PHY driver gains a .handle_interrupt() implementation that, for
> > the most part, would look like below:
> >
> > irq_status = phy_read(phydev, INTR_STATUS);
> > if (irq_status < 0) {
> > phy_error(phydev);
> > return IRQ_NONE;
> > }
> >
> > if (irq_status == 0)
> > return IRQ_NONE;
> >
> > phy_trigger_machine(phydev);
> >
> > return IRQ_HANDLED;
> >
> > - Remove each PHY driver's implementation of the .ack_interrupt() by
> > actually taking care of quiescing any pending interrupts before
> > enabling/after disabling the interrupt line.
> >
> > - Finally, after all drivers have been ported, remove the
> > .ack_interrupt() and .did_interrupt() callbacks from phy_driver.
> >
>
> Looks good to me. The current interrupt support in phylib basically
> just covers the link change interrupt and we need more flexibility.
>
> And even in the current limited use case we face smaller issues.
> One reason is that INTR_STATUS typically is self-clearing on read.
> phylib has to deal with the case that did_interrupt may or may not
> have read INTR_STATUS already.
>
> I'd just like to avoid the term "shared interrupt", because it has
> a well-defined meaning. Our major concern isn't shared interrupts
> but support for multiple interrupt sources (in addition to
> link change) in a PHY.
>

I am not going to address this part, Vladimir did a good job in the
following emails describing exactly the problem that I am trying to fix
- shared interrupts even between PHYs which are not in the same package
or even the same type of device.

> WRT implementing a shutdown hook another use case was mentioned
> recently: https://lkml.org/lkml/2020/9/30/451
> But that's not really relevant here and just fyi.
>

I missed this thread. Thanks for the link!

Ioana