Re: [PATCH v7 02/12] dt-bindings: leds: Convert pwm to yaml

From: Russell King - ARM Linux admin
Date: Thu Oct 29 2020 - 09:46:38 EST


On Wed, Oct 28, 2020 at 09:39:54PM +0100, Alexander Dahl wrote:
> Hello,
>
> Peter, Russel, could you please give your Acked-by or Signed-off-by on
> this patch? Your ack is needed, because the license is now explicitly
> set (it was not explicit before), and you were the contributors to
> this binding before the conversion to yaml.

For the license change only:

Acked-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxx>

(Please drop the Cc attributation in the commit to
linux@xxxxxxxxxxxxxxx thanks.)

>
> Thanks and Greets
> Alex
>
> On Mon, Oct 05, 2020 at 10:34:41PM +0200, Alexander Dahl wrote:
> > The example was adapted in the following ways:
> >
> > - make use of the now supported 'function' and 'color' properties
> > - remove pwm nodes, those are documented elsewhere
> > - align node names to new dt schema rules and dt recommendations
> >
> > License was not explicitly set before. The license set now is
> > recommended by DT project.
> >
> > Suggested-by: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
> > Signed-off-by: Alexander Dahl <post@xxxxxxxxxxx>
> > Reviewed-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> > Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
> > Cc: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
> > Cc: Russell King <linux@xxxxxxxxxxxxxxx>
> > ---
> >
> > Notes:
> > NOTE: Due to license set/change this needs Acked-by or Signed-off-by from:
> > * Peter Ujfalusi
> > * Russell King
> >
> > That was discussed already with Peter (original author), still waiting
> > for Acked-by though …
> >
> > Changelog
> > ---------
> > v6 -> v7:
> > * added Reviewed-by (Krzysztof Kozlowski)
> > * reworded commit message (suggested by Krzysztof)
> > * added Reviewed-by (Rob Herring)
> >
> > v5 -> v6:
> > * removed pwm nodes from example (Rob)
> > * renamed led-controller node in example (Rob)
> >
> > v4 -> v5:
> > * updated based on feedback by Rob Herring
> > * removed Acked-by
> >
> > v3 -> v4:
> > * added Cc to original author of the binding
> >
> > v2 -> v3:
> > * changed license identifier to recommended one
> > * added Acked-by
> >
> > v2:
> > * added this patch to series (Suggested-by: Jacek Anaszewski)
> >
> > .../devicetree/bindings/leds/leds-pwm.txt | 50 -------------
> > .../devicetree/bindings/leds/leds-pwm.yaml | 70 +++++++++++++++++++
> > 2 files changed, 70 insertions(+), 50 deletions(-)
> > delete mode 100644 Documentation/devicetree/bindings/leds/leds-pwm.txt
> > create mode 100644 Documentation/devicetree/bindings/leds/leds-pwm.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/leds/leds-pwm.txt b/Documentation/devicetree/bindings/leds/leds-pwm.txt
> > deleted file mode 100644
> > index 6c6583c35f2f..000000000000
> > --- a/Documentation/devicetree/bindings/leds/leds-pwm.txt
> > +++ /dev/null
> > @@ -1,50 +0,0 @@
> > -LED connected to PWM
> > -
> > -Required properties:
> > -- compatible : should be "pwm-leds".
> > -
> > -Each LED is represented as a sub-node of the pwm-leds device. Each
> > -node's name represents the name of the corresponding LED.
> > -
> > -LED sub-node properties:
> > -- pwms : PWM property to point to the PWM device (phandle)/port (id) and to
> > - specify the period time to be used: <&phandle id period_ns>;
> > -- pwm-names : (optional) Name to be used by the PWM subsystem for the PWM device
> > - For the pwms and pwm-names property please refer to:
> > - Documentation/devicetree/bindings/pwm/pwm.txt
> > -- max-brightness : Maximum brightness possible for the LED
> > -- active-low : (optional) For PWMs where the LED is wired to supply
> > - rather than ground.
> > -- label : (optional)
> > - see Documentation/devicetree/bindings/leds/common.txt
> > -- linux,default-trigger : (optional)
> > - see Documentation/devicetree/bindings/leds/common.txt
> > -
> > -Example:
> > -
> > -twl_pwm: pwm {
> > - /* provides two PWMs (id 0, 1 for PWM1 and PWM2) */
> > - compatible = "ti,twl6030-pwm";
> > - #pwm-cells = <2>;
> > -};
> > -
> > -twl_pwmled: pwmled {
> > - /* provides one PWM (id 0 for Charing indicator LED) */
> > - compatible = "ti,twl6030-pwmled";
> > - #pwm-cells = <2>;
> > -};
> > -
> > -pwmleds {
> > - compatible = "pwm-leds";
> > - kpad {
> > - label = "omap4::keypad";
> > - pwms = <&twl_pwm 0 7812500>;
> > - max-brightness = <127>;
> > - };
> > -
> > - charging {
> > - label = "omap4:green:chrg";
> > - pwms = <&twl_pwmled 0 7812500>;
> > - max-brightness = <255>;
> > - };
> > -};
> > diff --git a/Documentation/devicetree/bindings/leds/leds-pwm.yaml b/Documentation/devicetree/bindings/leds/leds-pwm.yaml
> > new file mode 100644
> > index 000000000000..fe4d5fd25913
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/leds/leds-pwm.yaml
> > @@ -0,0 +1,70 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/leds/leds-pwm.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: LEDs connected to PWM
> > +
> > +maintainers:
> > + - Pavel Machek <pavel@xxxxxx>
> > +
> > +description:
> > + Each LED is represented as a sub-node of the pwm-leds device. Each
> > + node's name represents the name of the corresponding LED.
> > +
> > +properties:
> > + compatible:
> > + const: pwm-leds
> > +
> > +patternProperties:
> > + "^led(-[0-9a-f]+)?$":
> > + type: object
> > +
> > + $ref: common.yaml#
> > +
> > + properties:
> > + pwms:
> > + maxItems: 1
> > +
> > + pwm-names: true
> > +
> > + max-brightness:
> > + description:
> > + Maximum brightness possible for the LED
> > + $ref: /schemas/types.yaml#/definitions/uint32
> > +
> > + active-low:
> > + description:
> > + For PWMs where the LED is wired to supply rather than ground.
> > + type: boolean
> > +
> > + required:
> > + - pwms
> > + - max-brightness
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > +
> > + #include <dt-bindings/leds/common.h>
> > +
> > + led-controller {
> > + compatible = "pwm-leds";
> > +
> > + led-1 {
> > + label = "omap4::keypad";
> > + pwms = <&twl_pwm 0 7812500>;
> > + max-brightness = <127>;
> > + };
> > +
> > + led-2 {
> > + color = <LED_COLOR_ID_GREEN>;
> > + function = LED_FUNCTION_CHARGING;
> > + pwms = <&twl_pwmled 0 7812500>;
> > + max-brightness = <255>;
> > + };
> > + };
> > +
> > +...
> > --
> > 2.20.1
>
> --
> /"\ ASCII RIBBON | »With the first link, the chain is forged. The first
> \ / CAMPAIGN | speech censured, the first thought forbidden, the
> X AGAINST | first freedom denied, chains us all irrevocably.«
> / \ HTML MAIL | (Jean-Luc Picard, quoting Judge Aaron Satie)



--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!