[PATCH 1/2] dt-bindings: pinctrl: qcom: Add SDX55 pinctrl bindings

From: Vinod Koul
Date: Wed Oct 28 2020 - 18:23:36 EST


Add device tree binding Documentation details for Qualcomm SDX55
pinctrl driver.

Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
---
.../bindings/pinctrl/qcom,sdx55-pinctrl.yaml | 144 ++++++++++++++++++
1 file changed, 144 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml
new file mode 100644
index 000000000000..2dd045a2fb03
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sdx55-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SDX55 TLMM block
+
+maintainers:
+ - Vinod Koul <vkoul@xxxxxxxxxx>
+
+description: |
+ This binding describes the Top Level Mode Multiplexer block found in the
+ SDX55 platform.
+
+properties:
+ compatible:
+ const: qcom,sdx55-pinctrl
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: Specifies the TLMM summary IRQ
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ description:
+ Specifies the PIN numbers and Flags, as defined in defined in
+ include/dt-bindings/interrupt-controller/irq.h
+ const: 2
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ description: Specifying the pin number and flags, as defined in
+ include/dt-bindings/gpio/gpio.h
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+ wakeup-parent:
+ maxItems: 1
+
+#PIN CONFIGURATION NODES
+patternProperties:
+ '^.*$':
+ if:
+ type: object
+ then:
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9])$"
+ - enum: [ ufs_reset, sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ enum: [ adsp_ext, atest, audio_ref, bimc_dte0, bimc_dte1, blsp_i2c1,
+ blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_spi1, blsp_spi2,
+ blsp_spi3, blsp_spi4, blsp_uart1, blsp_uart2, blsp_uart3,
+ blsp_uart4, char_exec, coex_uart, coex_uart2, cri_trng,
+ cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0,
+ ebi0_wrcdc, ebi2_a, ebi2_lcd, emac_gcc0, emac_gcc1,
+ emac_pps0, emac_pps1, ext_dbg, gcc_gp1, gcc_gp2, gcc_gp3,
+ gcc_plltest, gpio, i2s_mclk, jitter_bist, ldo_en, ldo_update,
+ mgpi_clk, m_voc, native_char, native_char0, native_char1,
+ native_char2, native_char3, native_tsens, native_tsense,
+ nav_gpio, pa_indicator, pcie_clkreq, pci_e, pll_bist, pll_ref,
+ pll_test, pri_mi2s, prng_rosc, qdss_cti, qdss_gpio,
+ qdss_gpio0, qdss_gpio1, qdss_gpio2, qdss_gpio3, qdss_gpio4,
+ qdss_gpio5, qdss_gpio6, qdss_gpio7, qdss_gpio8, qdss_gpio9,
+ qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13,
+ qdss_gpio14, qdss_gpio15, qdss_stm0, qdss_stm1, qdss_stm2,
+ qdss_stm3, qdss_stm4, qdss_stm5, qdss_stm6, qdss_stm7,
+ qdss_stm8, qdss_stm9, qdss_stm10, qdss_stm11, qdss_stm12,
+ qdss_stm13, qdss_stm14, qdss_stm15, qdss_stm16, qdss_stm17,
+ qdss_stm18, qdss_stm19, qdss_stm20, qdss_stm21, qdss_stm22,
+ qdss_stm23, qdss_stm24, qdss_stm25, qdss_stm26, qdss_stm27,
+ qdss_stm28, qdss_stm29, qdss_stm30, qdss_stm31, qlink0_en,
+ qlink0_req, qlink0_wmss, qlink1_en, qlink1_req, qlink1_wmss,
+ spmi_coex, sec_mi2s, spmi_vgi, tgu_ch0, uim1_clk, uim1_data,
+ uim1_present, uim1_reset, uim2_clk, uim2_data, uim2_present,
+ uim2_reset, usb2phy_ac, vsense_trigger ]
+
+ drive-strength:
+ enum: [2, 4, 6, 8, 10, 12, 14, 16]
+ default: 2
+ description:
+ Selects the drive strength for the specified pins, in mA.
+
+ bias-pull-down: true
+
+ bias-pull-up: true
+
+ bias-disable: true
+
+ output-high: true
+
+ output-low: true
+
+ required:
+ - pins
+ - function
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - '#interrupt-cells'
+ - gpio-controller
+ - '#gpio-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ pinctrl@1f00000 {
+ compatible = "qcom,sdx55-pinctrl";
+ reg = <0x0f100000 0x300000>;
+ interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+...
--
2.26.2