[PATCH v2 0/2] add ast2400/2500 phy-handle support

[Ivan Mikhaylov]

This patch introduces ast2400/2500 phy-handle support with an embedded
MDIO controller. At the current moment it is not possible to set options
with this format on ast2400/2500:

mac {
	phy-handle = <&phy>;
	phy-mode = "rgmii";

	mdio {
		#address-cells = <1>;
		#size-cells = <0>;

		phy: ethernet-phy@0 {
			compatible = "ethernet-phy-idxxxx.yyyy";
			reg = <0>;
		};
	};
};

The patch fixes it and gets possible PHYs and register them with
of_mdiobus_register.

Changes from v2:
   1. change manual phy interface type check on phy_interface_mode_is_rgmii
      function.
   2. add err_phy_connect label.
   3. split ftgmac100_destroy_mdio into ftgmac100_phy_disconnect and
      ftgmac100_destroy_mdio.
   4. remove unneeded mdio_np checks.

Changes from v1:
   1. split one patch into two.


Ivan Mikhaylov (2):
  net: ftgmac100: move phy connect out from ftgmac100_setup_mdio
  net: ftgmac100: add handling of mdio/phy nodes for ast2400/2500

 drivers/net/ethernet/faraday/ftgmac100.c | 122 +++++++++++++----------
 1 file changed, 71 insertions(+), 51 deletions(-)

-- 
2.21.1