Re: [linux-sunxi] [PATCH 01/14] phy: Distinguish between Rx and Tx for MIPI D-PHY with submodes

From: Jernej Škrabec
Date: Fri Oct 23 2020 - 14:13:38 EST


Hi!

Dne petek, 23. oktober 2020 ob 19:45:33 CEST je Paul Kocialkowski napisal(a):
> As some D-PHY controllers support both Rx and Tx mode, we need a way for
> users to explicitly request one or the other. For instance, Rx mode can
> be used along with MIPI CSI-2 while Tx mode can be used with MIPI DSI.
>
> Introduce new MIPI D-PHY PHY submodes to use with PHY_MODE_MIPI_DPHY.
> The default (zero value) is kept to Tx so only the rkisp1 driver, which
> uses D-PHY in Rx mode, needs to be adapted.
>
> Signed-off-by: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxx>
> ---
> drivers/staging/media/rkisp1/rkisp1-isp.c | 3 ++-
> include/linux/phy/phy-mipi-dphy.h | 13 +++++++++++++

I think some changes are missing in this patch. For example,
phy_set_mode_ext() must be modified to take another argument, otherwise change
of rkisp1-isp driver doesn't make much sense.

Best regards,
Jernej

> 2 files changed, 15 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/staging/media/rkisp1/rkisp1-isp.c b/drivers/staging/
media/rkisp1/rkisp1-isp.c
> index 6ec1e9816e9f..0afbce00121e 100644
> --- a/drivers/staging/media/rkisp1/rkisp1-isp.c
> +++ b/drivers/staging/media/rkisp1/rkisp1-isp.c
> @@ -902,7 +902,8 @@ static int rkisp1_mipi_csi2_start(struct rkisp1_isp
*isp,
>
> phy_mipi_dphy_get_default_config(pixel_clock, isp->sink_fmt-
>bus_width,
> sensor->lanes, cfg);
> - phy_set_mode(sensor->dphy, PHY_MODE_MIPI_DPHY);
> + phy_set_mode_ext(cdev->dphy, PHY_MODE_MIPI_DPHY,
> + PHY_MIPI_DPHY_SUBMODE_RX);
> phy_configure(sensor->dphy, &opts);
> phy_power_on(sensor->dphy);
>
> diff --git a/include/linux/phy/phy-mipi-dphy.h b/include/linux/phy/phy-mipi-
dphy.h
> index a877ffee845d..0f57ef46a8b5 100644
> --- a/include/linux/phy/phy-mipi-dphy.h
> +++ b/include/linux/phy/phy-mipi-dphy.h
> @@ -6,6 +6,19 @@
> #ifndef __PHY_MIPI_DPHY_H_
> #define __PHY_MIPI_DPHY_H_
>
> +/**
> + * enum phy_mipi_dphy_submode - MIPI D-PHY sub-mode
> + *
> + * A MIPI D-PHY can be used to transmit or receive data.
> + * Since some controllers can support both, the direction to enable is
specified
> + * with the PHY sub-mode. Transmit is assumed by default with phy_set_mode.
> + */
> +
> +enum phy_mipi_dphy_submode {
> + PHY_MIPI_DPHY_SUBMODE_TX = 0,
> + PHY_MIPI_DPHY_SUBMODE_RX,
> +};
> +
> /**
> * struct phy_configure_opts_mipi_dphy - MIPI D-PHY configuration set
> *
> --
> 2.28.0
>
> --
> You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an
email to linux-sunxi+unsubscribe@xxxxxxxxxxxxxxxx.
> To view this discussion on the web, visit https://groups.google.com/d/msgid/
linux-sunxi/20201023174546.504028-2-paul.kocialkowski%40bootlin.com.
>