Re: [PATCH] PCI: dwc: Added link up check in map_bus of dw_child_pcie_ops

From: Lorenzo Pieralisi
Date: Tue Oct 20 2020 - 06:19:30 EST


On Thu, Oct 15, 2020 at 05:47:38PM -0500, Bjorn Helgaas wrote:
> On Wed, Sep 16, 2020 at 01:41:30PM +0800, Zhiqiang Hou wrote:
> > From: Hou Zhiqiang <Zhiqiang.Hou@xxxxxxx>
> >
> > On NXP Layerscape platforms, it results in SError in the
> > enumeration of the PCIe controller, which is not connecting
> > with an Endpoint device. And it doesn't make sense to
> > enumerate the Endpoints when the PCIe link is down. So this
> > patch added the link up check to avoid to fire configuration
> > transactions on link down bus.
>
> Lorenzo already applied this, but a couple questions:
>
> You call out NXP Layerscape specifically, but doesn't this affect
> other DWC-based platforms, too? You later mentioned imx6, Kishon
> mentioned dra7xx, Michael mentioned ls1028a, Naresh mentioned ls2088
> (probably both the same as your "NXP Layerscape").
>
> The backtrace below contains a bunch of irrelevant info. The
> timestamps are pointless. The backtrace past
> pci_scan_single_device+0x80/0x100 or so really doesn't add anything
> either.
>
> It'd be nice to have a comment in the code because the code *looks*
> wrong and racy. Without a hint, everybody who sees it will have to
> dig through the history to see why we tolerate the race.

I have updated the commit log the best I could with the information
I have, pci/dwc branch. Please all have a look and report any issue
you may find.

This link-up check is nonetheless broken and we should find a long
term solution that is not relying on these shaky fixes.

Lorenzo

> > [ 0.807773] SError Interrupt on CPU2, code 0xbf000002 -- SError
> > [ 0.807775] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc5-next-20200914-00001-gf965d3ec86fa #67
> > [ 0.807776] Hardware name: LS1046A RDB Board (DT)
> > [ 0.807777] pstate: 20000085 (nzCv daIf -PAN -UAO BTYPE=--)
> > [ 0.807778] pc : pci_generic_config_read+0x3c/0xe0
> > [ 0.807778] lr : pci_generic_config_read+0x24/0xe0
> > [ 0.807779] sp : ffff80001003b7b0
> > [ 0.807780] x29: ffff80001003b7b0 x28: ffff80001003ba74
> > [ 0.807782] x27: ffff000971d96800 x26: ffff00096e77e0a8
> > [ 0.807784] x25: ffff80001003b874 x24: ffff80001003b924
> > [ 0.807786] x23: 0000000000000004 x22: 0000000000000000
> > [ 0.807788] x21: 0000000000000000 x20: ffff80001003b874
> > [ 0.807790] x19: 0000000000000004 x18: ffffffffffffffff
> > [ 0.807791] x17: 00000000000000c0 x16: fffffe0025981840
> > [ 0.807793] x15: ffffb94c75b69948 x14: 62203a383634203a
> > [ 0.807795] x13: 666e6f635f726568 x12: 202c31203d207265
> > [ 0.807797] x11: 626d756e3e2d7375 x10: 656877202c307830
> > [ 0.807799] x9 : 203d206e66766564 x8 : 0000000000000908
> > [ 0.807801] x7 : 0000000000000908 x6 : ffff800010900000
> > [ 0.807802] x5 : ffff00096e77e080 x4 : 0000000000000000
> > [ 0.807804] x3 : 0000000000000003 x2 : 84fa3440ff7e7000
> > [ 0.807806] x1 : 0000000000000000 x0 : ffff800010034000
> > [ 0.807808] Kernel panic - not syncing: Asynchronous SError Interrupt
> > [ 0.807809] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc5-next-20200914-00001-gf965d3ec86fa #67
> > [ 0.807810] Hardware name: LS1046A RDB Board (DT)
> > [ 0.807811] Call trace:
> > [ 0.807812] dump_backtrace+0x0/0x1c0
> > [ 0.807813] show_stack+0x18/0x28
> > [ 0.807814] dump_stack+0xd8/0x134
> > [ 0.807814] panic+0x180/0x398
> > [ 0.807815] add_taint+0x0/0xb0
> > [ 0.807816] arm64_serror_panic+0x78/0x88
> > [ 0.807817] do_serror+0x68/0x180
> > [ 0.807818] el1_error+0x84/0x100
> > [ 0.807818] pci_generic_config_read+0x3c/0xe0
> > [ 0.807819] dw_pcie_rd_other_conf+0x78/0x110
> > [ 0.807820] pci_bus_read_config_dword+0x88/0xe8
> > [ 0.807821] pci_bus_generic_read_dev_vendor_id+0x30/0x1b0
> > [ 0.807822] pci_bus_read_dev_vendor_id+0x4c/0x78
> > [ 0.807823] pci_scan_single_device+0x80/0x100
> > [ 0.807824] pci_scan_slot+0x38/0x130
> > [ 0.807825] pci_scan_child_bus_extend+0x54/0x2a0
> > [ 0.807826] pci_scan_child_bus+0x14/0x20
> > [ 0.807827] pci_scan_bridge_extend+0x230/0x570
> > [ 0.807828] pci_scan_child_bus_extend+0x134/0x2a0
> > [ 0.807829] pci_scan_root_bus_bridge+0x64/0xf0
> > [ 0.807829] pci_host_probe+0x18/0xc8
> > [ 0.807830] dw_pcie_host_init+0x220/0x378
> > [ 0.807831] ls_pcie_probe+0x104/0x140
> > [ 0.807832] platform_drv_probe+0x54/0xa8
> > [ 0.807833] really_probe+0x118/0x3e0
> > [ 0.807834] driver_probe_device+0x5c/0xc0
> > [ 0.807835] device_driver_attach+0x74/0x80
> > [ 0.807835] __driver_attach+0x8c/0xd8
> > [ 0.807836] bus_for_each_dev+0x7c/0xd8
> > [ 0.807837] driver_attach+0x24/0x30
> > [ 0.807838] bus_add_driver+0x154/0x200
> > [ 0.807839] driver_register+0x64/0x120
> > [ 0.807839] __platform_driver_probe+0x7c/0x148
> > [ 0.807840] ls_pcie_driver_init+0x24/0x30
> > [ 0.807841] do_one_initcall+0x60/0x1d8
> > [ 0.807842] kernel_init_freeable+0x1f4/0x24c
> > [ 0.807843] kernel_init+0x14/0x118
> > [ 0.807843] ret_from_fork+0x10/0x34
> > [ 0.807854] SMP: stopping secondary CPUs
> > [ 0.807855] Kernel Offset: 0x394c64080000 from 0xffff800010000000
> > [ 0.807856] PHYS_OFFSET: 0xffff8bfd40000000
> > [ 0.807856] CPU features: 0x0240022,21806000
> > [ 0.807857] Memory Limit: none
> >
> > Fixes: c2b0c098fbd1 ("PCI: dwc: Use generic config accessors")
> > Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@xxxxxxx>
> > ---
> > drivers/pci/controller/dwc/pcie-designware-host.c | 6 ++++++
> > 1 file changed, 6 insertions(+)
> >
> > diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
> > index c01c9d2fb3f9..e82b518430c5 100644
> > --- a/drivers/pci/controller/dwc/pcie-designware-host.c
> > +++ b/drivers/pci/controller/dwc/pcie-designware-host.c
> > @@ -442,6 +442,9 @@ static void __iomem *dw_pcie_other_conf_map_bus(struct pci_bus *bus,
> > struct pcie_port *pp = bus->sysdata;
> > struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> >
> > + if (!dw_pcie_link_up(pci))
> > + return NULL;
> > +
> > busdev = PCIE_ATU_BUS(bus->number) | PCIE_ATU_DEV(PCI_SLOT(devfn)) |
> > PCIE_ATU_FUNC(PCI_FUNC(devfn));
> >
> > --
> > 2.17.1
> >