[PATCH 1/2] clk: axi-clkgen: wrap limits in a struct and keep copy on the state object

[Alexandru Ardelean]

Up until now the these limits were global/hard-coded, since they are
typically limits of the fabric.

However, since this is an FPGA generated clock, this may run on setups
where one clock is on a fabric, and another one synthesized on another
fabric connected via PCIe (or some other inter-connect), and then these
limits need to be adjusted for each instance of the AXI CLKGEN.

This change wraps the current constants in 'axi_clkgen_limits' struct and
the 'axi_clkgen' instance keeps a copy of these limits, which is
initialized at probe from the default limits.

The limits are stored on the device-tree OF table, so that we can adjust
them via the compatible string.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
---
 drivers/clk/clk-axi-clkgen.c | 48 +++++++++++++++++++++++-------------
 1 file changed, 31 insertions(+), 17 deletions(-)

diff --git a/drivers/clk/clk-axi-clkgen.c b/drivers/clk/clk-axi-clkgen.c
index 14d803e6af62..963a62e9c728 100644
--- a/drivers/clk/clk-axi-clkgen.c
+++ b/drivers/clk/clk-axi-clkgen.c
@@ -46,9 +46,17 @@
 #define MMCM_CLK_DIV_DIVIDE	BIT(11)
 #define MMCM_CLK_DIV_NOCOUNT	BIT(12)
 
+struct axi_clkgen_limits {
+	unsigned int fpfd_min;
+	unsigned int fpfd_max;
+	unsigned int fvco_min;
+	unsigned int fvco_max;
+};
+
 struct axi_clkgen {
 	void __iomem *base;
 	struct clk_hw clk_hw;
+	struct axi_clkgen_limits limits;
 };
 
 static uint32_t axi_clkgen_lookup_filter(unsigned int m)
@@ -100,12 +108,15 @@ static uint32_t axi_clkgen_lookup_lock(unsigned int m)
 	return 0x1f1f00fa;
 }
 
-static const unsigned int fpfd_min = 10000;
-static const unsigned int fpfd_max = 300000;
-static const unsigned int fvco_min = 600000;
-static const unsigned int fvco_max = 1200000;
+static const struct axi_clkgen_limits axi_clkgen_zynq_default_limits = {
+	.fpfd_min = 10000,
+	.fpfd_max = 300000,
+	.fvco_min = 600000,
+	.fvco_max = 1200000,
+};
 
-static void axi_clkgen_calc_params(unsigned long fin, unsigned long fout,
+static void axi_clkgen_calc_params(const struct axi_clkgen_limits *limits,
+	unsigned long fin, unsigned long fout,
 	unsigned int *best_d, unsigned int *best_m, unsigned int *best_dout)
 {
 	unsigned long d, d_min, d_max, _d_min, _d_max;
@@ -122,12 +133,12 @@ static void axi_clkgen_calc_params(unsigned long fin, unsigned long fout,
 	*best_m = 0;
 	*best_dout = 0;
 
-	d_min = max_t(unsigned long, DIV_ROUND_UP(fin, fpfd_max), 1);
-	d_max = min_t(unsigned long, fin / fpfd_min, 80);
+	d_min = max_t(unsigned long, DIV_ROUND_UP(fin, limits->fpfd_max), 1);
+	d_max = min_t(unsigned long, fin / limits->fpfd_min, 80);
 
 again:
-	fvco_min_fract = fvco_min << fract_shift;
-	fvco_max_fract = fvco_max << fract_shift;
+	fvco_min_fract = limits->fvco_min << fract_shift;
+	fvco_max_fract = limits->fvco_max << fract_shift;
 
 	m_min = max_t(unsigned long, DIV_ROUND_UP(fvco_min_fract, fin) * d_min, 1);
 	m_max = min_t(unsigned long, fvco_max_fract * d_max / fin, 64 << fract_shift);
@@ -319,6 +330,7 @@ static int axi_clkgen_set_rate(struct clk_hw *clk_hw,
 	unsigned long rate, unsigned long parent_rate)
 {
 	struct axi_clkgen *axi_clkgen = clk_hw_to_axi_clkgen(clk_hw);
+	const struct axi_clkgen_limits *limits = &axi_clkgen->limits;
 	unsigned int d, m, dout;
 	struct axi_clkgen_div_params params;
 	uint32_t power = 0;
@@ -328,7 +340,7 @@ static int axi_clkgen_set_rate(struct clk_hw *clk_hw,
 	if (parent_rate == 0 || rate == 0)
 		return -EINVAL;
 
-	axi_clkgen_calc_params(parent_rate, rate, &d, &m, &dout);
+	axi_clkgen_calc_params(limits, parent_rate, rate, &d, &m, &dout);
 
 	if (d == 0 || dout == 0 || m == 0)
 		return -EINVAL;
@@ -368,10 +380,12 @@ static int axi_clkgen_set_rate(struct clk_hw *clk_hw,
 static long axi_clkgen_round_rate(struct clk_hw *hw, unsigned long rate,
 	unsigned long *parent_rate)
 {
+	struct axi_clkgen *axi_clkgen = clk_hw_to_axi_clkgen(hw);
+	const struct axi_clkgen_limits *limits = &axi_clkgen->limits;
 	unsigned int d, m, dout;
 	unsigned long long tmp;
 
-	axi_clkgen_calc_params(*parent_rate, rate, &d, &m, &dout);
+	axi_clkgen_calc_params(limits, *parent_rate, rate, &d, &m, &dout);
 
 	if (d == 0 || dout == 0 || m == 0)
 		return -EINVAL;
@@ -485,6 +499,7 @@ static const struct clk_ops axi_clkgen_ops = {
 static const struct of_device_id axi_clkgen_ids[] = {
 	{
 		.compatible = "adi,axi-clkgen-2.00.a",
+		.data = &axi_clkgen_zynq_default_limits,
 	},
 	{ },
 };
@@ -492,7 +507,7 @@ MODULE_DEVICE_TABLE(of, axi_clkgen_ids);
 
 static int axi_clkgen_probe(struct platform_device *pdev)
 {
-	const struct of_device_id *id;
+	const struct axi_clkgen_limits *dflt_limits;
 	struct axi_clkgen *axi_clkgen;
 	struct clk_init_data init;
 	const char *parent_names[2];
@@ -501,11 +516,8 @@ static int axi_clkgen_probe(struct platform_device *pdev)
 	unsigned int i;
 	int ret;
 
-	if (!pdev->dev.of_node)
-		return -ENODEV;
-
-	id = of_match_node(axi_clkgen_ids, pdev->dev.of_node);
-	if (!id)
+	dflt_limits = device_get_match_data(&pdev->dev);
+	if (!dflt_limits)
 		return -ENODEV;
 
 	axi_clkgen = devm_kzalloc(&pdev->dev, sizeof(*axi_clkgen), GFP_KERNEL);
@@ -527,6 +539,8 @@ static int axi_clkgen_probe(struct platform_device *pdev)
 			return -EINVAL;
 	}
 
+	memcpy(&axi_clkgen->limits, dflt_limits, sizeof(axi_clkgen->limits));
+
 	clk_name = pdev->dev.of_node->name;
 	of_property_read_string(pdev->dev.of_node, "clock-output-names",
 		&clk_name);
-- 
2.17.1