[PATCH v3 1/4] clk: qcom: clk-alpha-pll: Add support for helper functions

From: Taniya Das
Date: Fri Oct 16 2020 - 14:44:00 EST


Introduce clk_alpha_pll_write_config and alpha_pll_check_rate_margin
helper functions to be across PLL configure functions and PLL set rate
functions.

Signed-off-by: Taniya Das <tdas@xxxxxxxxxxxxxx>
---
drivers/clk/qcom/clk-alpha-pll.c | 155 +++++++++++++++++----------------------
1 file changed, 66 insertions(+), 89 deletions(-)

diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index 5644311..f3b8b54 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c
@@ -207,6 +207,13 @@ static int wait_for_pll(struct clk_alpha_pll *pll, u32 mask, bool inverse,
#define wait_for_pll_update_ack_clear(pll) \
wait_for_pll(pll, ALPHA_PLL_ACK_LATCH, 1, "update_ack_clear")

+static void clk_alpha_pll_write_config(struct regmap *regmap, unsigned int reg,
+ unsigned int val)
+{
+ if (val)
+ regmap_write(regmap, reg, val);
+}
+
void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
const struct alpha_pll_config *config)
{
@@ -1004,33 +1011,19 @@ void clk_fabia_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
{
u32 val, mask;

- if (config->l)
- regmap_write(regmap, PLL_L_VAL(pll), config->l);
-
- if (config->alpha)
- regmap_write(regmap, PLL_FRAC(pll), config->alpha);
-
- if (config->config_ctl_val)
- regmap_write(regmap, PLL_CONFIG_CTL(pll),
+ clk_alpha_pll_write_config(regmap, PLL_L_VAL(pll), config->l);
+ clk_alpha_pll_write_config(regmap, PLL_FRAC(pll), config->alpha);
+ clk_alpha_pll_write_config(regmap, PLL_CONFIG_CTL(pll),
config->config_ctl_val);
-
- if (config->config_ctl_hi_val)
- regmap_write(regmap, PLL_CONFIG_CTL_U(pll),
+ clk_alpha_pll_write_config(regmap, PLL_CONFIG_CTL_U(pll),
config->config_ctl_hi_val);
-
- if (config->user_ctl_val)
- regmap_write(regmap, PLL_USER_CTL(pll), config->user_ctl_val);
-
- if (config->user_ctl_hi_val)
- regmap_write(regmap, PLL_USER_CTL_U(pll),
+ clk_alpha_pll_write_config(regmap, PLL_USER_CTL(pll),
+ config->user_ctl_val);
+ clk_alpha_pll_write_config(regmap, PLL_USER_CTL_U(pll),
config->user_ctl_hi_val);
-
- if (config->test_ctl_val)
- regmap_write(regmap, PLL_TEST_CTL(pll),
+ clk_alpha_pll_write_config(regmap, PLL_TEST_CTL(pll),
config->test_ctl_val);
-
- if (config->test_ctl_hi_val)
- regmap_write(regmap, PLL_TEST_CTL_U(pll),
+ clk_alpha_pll_write_config(regmap, PLL_TEST_CTL_U(pll),
config->test_ctl_hi_val);

if (config->post_div_mask) {
@@ -1145,25 +1138,38 @@ static unsigned long alpha_pll_fabia_recalc_rate(struct clk_hw *hw,
return alpha_pll_calc_rate(parent_rate, l, frac, alpha_width);
}

+/*
+ * Due to limited number of bits for fractional rate programming, the
+ * rounded up rate could be marginally higher than the requested rate.
+ */
+static int alpha_pll_check_rate_margin(struct clk_hw *hw,
+ unsigned long rrate, unsigned long rate)
+{
+ unsigned long rate_margin = rate + PLL_RATE_MARGIN;
+
+ if (rrate > rate_margin || rrate < rate) {
+ pr_err("%s: Rounded rate %lu not within range [%lu, %lu)\n",
+ clk_hw_get_name(hw), rrate, rate, rate_margin);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static int alpha_pll_fabia_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long prate)
{
struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
u32 l, alpha_width = pll_alpha_width(pll);
+ unsigned long rrate;
+ int ret;
u64 a;
- unsigned long rrate, max = rate + PLL_RATE_MARGIN;

rrate = alpha_pll_round_rate(rate, prate, &l, &a, alpha_width);

- /*
- * Due to limited number of bits for fractional rate programming, the
- * rounded up rate could be marginally higher than the requested rate.
- */
- if (rrate > (rate + PLL_RATE_MARGIN) || rrate < rate) {
- pr_err("%s: Rounded rate %lu not within range [%lu, %lu)\n",
- clk_hw_get_name(hw), rrate, rate, max);
- return -EINVAL;
- }
+ ret = alpha_pll_check_rate_margin(hw, rrate, rate);
+ if (ret < 0)
+ return ret;

regmap_write(pll->clkr.regmap, PLL_L_VAL(pll), l);
regmap_write(pll->clkr.regmap, PLL_FRAC(pll), a);
@@ -1206,12 +1212,10 @@ static int alpha_pll_fabia_prepare(struct clk_hw *hw)

rrate = alpha_pll_round_rate(cal_freq, clk_hw_get_rate(parent_hw),
&cal_l, &a, alpha_width);
- /*
- * Due to a limited number of bits for fractional rate programming, the
- * rounded up rate could be marginally higher than the requested rate.
- */
- if (rrate > (cal_freq + PLL_RATE_MARGIN) || rrate < cal_freq)
- return -EINVAL;
+
+ ret = alpha_pll_check_rate_margin(hw, rrate, cal_freq);
+ if (ret < 0)
+ return ret;

/* Setup PLL for calibration frequency */
regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), cal_l);
@@ -1388,49 +1392,27 @@ EXPORT_SYMBOL_GPL(clk_alpha_pll_postdiv_fabia_ops);
void clk_trion_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
const struct alpha_pll_config *config)
{
- if (config->l)
- regmap_write(regmap, PLL_L_VAL(pll), config->l);
-
+ clk_alpha_pll_write_config(regmap, PLL_L_VAL(pll), config->l);
regmap_write(regmap, PLL_CAL_L_VAL(pll), TRION_PLL_CAL_VAL);
-
- if (config->alpha)
- regmap_write(regmap, PLL_ALPHA_VAL(pll), config->alpha);
-
- if (config->config_ctl_val)
- regmap_write(regmap, PLL_CONFIG_CTL(pll),
- config->config_ctl_val);
-
- if (config->config_ctl_hi_val)
- regmap_write(regmap, PLL_CONFIG_CTL_U(pll),
- config->config_ctl_hi_val);
-
- if (config->config_ctl_hi1_val)
- regmap_write(regmap, PLL_CONFIG_CTL_U1(pll),
- config->config_ctl_hi1_val);
-
- if (config->user_ctl_val)
- regmap_write(regmap, PLL_USER_CTL(pll),
- config->user_ctl_val);
-
- if (config->user_ctl_hi_val)
- regmap_write(regmap, PLL_USER_CTL_U(pll),
- config->user_ctl_hi_val);
-
- if (config->user_ctl_hi1_val)
- regmap_write(regmap, PLL_USER_CTL_U1(pll),
- config->user_ctl_hi1_val);
-
- if (config->test_ctl_val)
- regmap_write(regmap, PLL_TEST_CTL(pll),
- config->test_ctl_val);
-
- if (config->test_ctl_hi_val)
- regmap_write(regmap, PLL_TEST_CTL_U(pll),
- config->test_ctl_hi_val);
-
- if (config->test_ctl_hi1_val)
- regmap_write(regmap, PLL_TEST_CTL_U1(pll),
- config->test_ctl_hi1_val);
+ clk_alpha_pll_write_config(regmap, PLL_ALPHA_VAL(pll), config->alpha);
+ clk_alpha_pll_write_config(regmap, PLL_CONFIG_CTL(pll),
+ config->config_ctl_val);
+ clk_alpha_pll_write_config(regmap, PLL_CONFIG_CTL_U(pll),
+ config->config_ctl_hi_val);
+ clk_alpha_pll_write_config(regmap, PLL_CONFIG_CTL_U1(pll),
+ config->config_ctl_hi1_val);
+ clk_alpha_pll_write_config(regmap, PLL_USER_CTL(pll),
+ config->user_ctl_val);
+ clk_alpha_pll_write_config(regmap, PLL_USER_CTL_U(pll),
+ config->user_ctl_hi_val);
+ clk_alpha_pll_write_config(regmap, PLL_USER_CTL_U1(pll),
+ config->user_ctl_hi1_val);
+ clk_alpha_pll_write_config(regmap, PLL_TEST_CTL(pll),
+ config->test_ctl_val);
+ clk_alpha_pll_write_config(regmap, PLL_TEST_CTL_U(pll),
+ config->test_ctl_hi_val);
+ clk_alpha_pll_write_config(regmap, PLL_TEST_CTL_U1(pll),
+ config->test_ctl_hi1_val);

regmap_update_bits(regmap, PLL_MODE(pll), PLL_UPDATE_BYPASS,
PLL_UPDATE_BYPASS);
@@ -1490,14 +1472,9 @@ static int alpha_pll_trion_set_rate(struct clk_hw *hw, unsigned long rate,

rrate = alpha_pll_round_rate(rate, prate, &l, &a, alpha_width);

- /*
- * Due to a limited number of bits for fractional rate programming, the
- * rounded up rate could be marginally higher than the requested rate.
- */
- if (rrate > (rate + PLL_RATE_MARGIN) || rrate < rate) {
- pr_err("Call set rate on the PLL with rounded rates!\n");
- return -EINVAL;
- }
+ ret = alpha_pll_check_rate_margin(hw, rrate, rate);
+ if (ret < 0)
+ return ret;

regmap_write(pll->clkr.regmap, PLL_L_VAL(pll), l);
regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), a);
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the Linux Foundation.