Re: [PATCH 1/1] net: ftgmac100: Fix Aspeed ast2600 TX hang issue

From: Joel Stanley
Date: Wed Oct 14 2020 - 22:35:48 EST


On Thu, 15 Oct 2020 at 01:49, Dylan Hung <dylan_hung@xxxxxxxxxxxxxx> wrote:
> > > I was encountering this issue when I was running the iperf TX test. The
> > symptom is the TX descriptors are consumed, but no complete packet is sent
> > out.
> >
> > What parameters are you using for iperf? I did a lot of testing with
> > iperf3 (and stress-ng running at the same time) and couldn't reproduce the
> > error.
> >
>
> I simply use "iperf -c <server ip>" on ast2600. It is very easy to reproduce. I append the log below:
> Noticed that this issue only happens when HW scatter-gather (NETIF_F_SG) is on.

Ok. This appears to be on by default in the
drivers/net/ethernet/faraday/ftgmac100.c:

netdev->hw_features = NETIF_F_RXCSUM | NETIF_F_HW_CSUM |
NETIF_F_GRO | NETIF_F_SG | NETIF_F_HW_VLAN_CTAG_RX |
NETIF_F_HW_VLAN_CTAG_TX;

> [AST /]$ iperf3 -c 192.168.100.89
> Connecting to host 192.168.100.89, port 5201
> [ 4] local 192.168.100.45 port 45346 connected to 192.168.100.89 port 5201
> [ ID] Interval Transfer Bandwidth Retr Cwnd
> [ 4] 0.00-1.00 sec 44.8 MBytes 375 Mbits/sec 2 1.43 KBytes
> [ 4] 1.00-2.00 sec 0.00 Bytes 0.00 bits/sec 2 1.43 KBytes
> [ 4] 2.00-3.00 sec 0.00 Bytes 0.00 bits/sec 0 1.43 KBytes
> [ 4] 3.00-4.00 sec 0.00 Bytes 0.00 bits/sec 1 1.43 KBytes
> [ 4] 4.00-5.00 sec 0.00 Bytes 0.00 bits/sec 0 1.43 KBytes
> ^C[ 4] 5.00-5.88 sec 0.00 Bytes 0.00 bits/sec 0 1.43 KBytes
> - - - - - - - - - - - - - - - - - - - - - - - - -
> [ ID] Interval Transfer Bandwidth Retr
> [ 4] 0.00-5.88 sec 44.8 MBytes 64.0 Mbits/sec 5 sender
> [ 4] 0.00-5.88 sec 0.00 Bytes 0.00 bits/sec receiver
> iperf3: interrupt - the client has terminated

I just realised my test machine must be on a 100Mbit network. I will
try testing on a gigabit network.

> > We could only reproduce it when performing other functions, such as
> > debugging/booting the host processor.
> >
> Could it be another issue?

I hope not! We have deployed your patch on our systems and I will let
you know if we see the bug again.

> > > > > +/*
> > > > > + * test mode control register
> > > > > + */
> > > > > +#define FTGMAC100_TM_RQ_TX_VALID_DIS (1 << 28) #define
> > > > > +FTGMAC100_TM_RQ_RR_IDLE_PREV (1 << 27) #define
> > > > > +FTGMAC100_TM_DEFAULT
> > > > \
> > > > > + (FTGMAC100_TM_RQ_TX_VALID_DIS |
> > > > FTGMAC100_TM_RQ_RR_IDLE_PREV)
> > > >
> > > > Will aspeed issue an updated datasheet with this register documented?
> >
> > Did you see this question?
> >
> Sorry, I missed this question. Aspeed will update the datasheet accordingly.

Thank you.