Re: [PATCH v2 1/3] dt-bindings: rtc: add trickle-voltage-millivolt

[Alexandre Belloni]

On 13/10/2020 08:38:55-0500, Rob Herring wrote:
> On Thu, Oct 08, 2020 at 12:05:04AM +0200, Alexandre Belloni wrote:
> > Some RTCs have a trickle charge that is able to output different voltages
> > depending on the type of the connected auxiliary power (battery, supercap,
> > ...). Add a property allowing to specify the necessary voltage.
> > 
> > Signed-off-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
> > ---
> > 
> > Changes in v2:
> >  - use millivolt suffix instead of mV
> 
> Try again...

Sorry, the change was wrongly squashed in patch 2/3, I've sent v3.

> 
> > 
> >  Documentation/devicetree/bindings/rtc/rtc.yaml | 7 +++++++
> >  1 file changed, 7 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/rtc/rtc.yaml b/Documentation/devicetree/bindings/rtc/rtc.yaml
> > index ee237b2ed66a..93f04d5e5307 100644
> > --- a/Documentation/devicetree/bindings/rtc/rtc.yaml
> > +++ b/Documentation/devicetree/bindings/rtc/rtc.yaml
> > @@ -42,6 +42,13 @@ properties:
> >        Selected resistor for trickle charger. Should be given
> >        if trickle charger should be enabled.
> >  
> > +  trickle-voltage-mV:
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    description:
> > +      Selected voltage for trickle charger. Should be given
> > +      if trickle charger should be enabled and the trickle voltage is different
> > +      from the RTC main power supply.
> > +
> >    wakeup-source:
> >      $ref: /schemas/types.yaml#/definitions/flag
> >      description:
> > -- 
> > 2.26.2
> > 

-- 
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com