Re: [PATCH 4/4] soc: mediatek: mmsys: Use an array for setting the routing registers

From: Chun-Kuang Hu
Date: Sat Oct 10 2020 - 22:29:06 EST


Hi, Matthias:

Matthias Brugger <matthias.bgg@xxxxxxxxx> 於 2020年10月8日 週四 下午6:22寫道:
>
> Hi Enric and CK,
>
> On 06/10/2020 21:33, Enric Balletbo i Serra wrote:
> > From: CK Hu <ck.hu@xxxxxxxxxxxx>
> >
> > Actually, setting the registers for routing, use multiple 'if-else' for different
> > routes, but this code would be more and more complicated while we
> > support more and more SoCs. Change that and use a table per SoC so the
> > code will be more portable and clear.
> >
>
> I'd like to have some clarifications on this patch. Now we use one big if-else
> structure to decide which value and address we need. As this values work for a
> large set of SoCs I suppose the hardware block is the same.
>
> When we add new HW like mt8183, mt8192 or mt6779 we will need different values.
> But my question is, if the HW between theses new platforms will be different
> (read values change for every SoC). Or will it be the same HW block for all
> these SoCs so that we could add three new functions ddp_mout_en, ddp_sout_sel
> and ddp_sel_in.
>

As I know, routes in mt8173, mt2701, mt2712 are different. That means
in the same register address, it control different input/output
selection for each SoC. But they use a very tricky way to use the same
table: some register's default value (the default routes) meet their
requirement, they do not set it and just set the register whose
default value does not meet the requirement. But this tricky way fail
when support more SoC, so mt8183 and mt8192 need an independent route.
So we have better have different route for each SoC, but we don't have
the complete route information for these three SoC, so just keep them
in the same table. After we've more information, we could separate
mt2701, mt2712 to an independent table.

> Why I'm asking? Because right now it seems like double the work we have to do
> for every SoC. We will need to define the components in the DRM driver and then
> we need to add the values for the routing.

The double work are two different function work. mmsys driver provide
full routing control and drm choose the route according to its
application. For example:

mmsys provide the three route:

rdma0 -> dsi0
rdma1 -> dsi0
rdma2 -> dsi0

and drm could only choose one at some moment. Even drm now just choose
rdma0 -> dsi0, I think mmsys still should provide the full route
control like clock driver (even though some clock is not use by client
driver, clock driver should implement all clock control function)

>
> More comments below.
>
> > Signed-off-by: CK Hu <ck.hu@xxxxxxxxxxxx>
> > Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
> > ---
> >
> > drivers/soc/mediatek/mtk-mmsys.c | 393 +++++++++++++++++--------------
> > 1 file changed, 210 insertions(+), 183 deletions(-)
> >
> > diff --git a/drivers/soc/mediatek/mtk-mmsys.c b/drivers/soc/mediatek/mtk-mmsys.c
> > index da2de8f6969e..f00d6d08c9c5 100644
> > --- a/drivers/soc/mediatek/mtk-mmsys.c
> > +++ b/drivers/soc/mediatek/mtk-mmsys.c
> > @@ -42,39 +42,61 @@
> > #define RDMA0_SOUT_DSI1 0x1
> > #define RDMA0_SOUT_DSI2 0x4
> > #define RDMA0_SOUT_DSI3 0x5
> > +#define RDMA0_SOUT_MASK 0x7
> > #define RDMA1_SOUT_DPI0 0x2
> > #define RDMA1_SOUT_DPI1 0x3
> > #define RDMA1_SOUT_DSI1 0x1
> > #define RDMA1_SOUT_DSI2 0x4
> > #define RDMA1_SOUT_DSI3 0x5
> > +#define RDMA1_SOUT_MASK 0x7
> > #define RDMA2_SOUT_DPI0 0x2
> > #define RDMA2_SOUT_DPI1 0x3
> > #define RDMA2_SOUT_DSI1 0x1
> > #define RDMA2_SOUT_DSI2 0x4
> > #define RDMA2_SOUT_DSI3 0x5
> > +#define RDMA2_SOUT_MASK 0x7
> > #define DPI0_SEL_IN_RDMA1 0x1
> > #define DPI0_SEL_IN_RDMA2 0x3
> > +#define DPI0_SEL_IN_MASK 0x3
> > #define DPI1_SEL_IN_RDMA1 (0x1 << 8)
> > #define DPI1_SEL_IN_RDMA2 (0x3 << 8)
> > +#define DPI1_SEL_IN_MASK (0x3 << 8)
> > #define DSI0_SEL_IN_RDMA1 0x1
> > #define DSI0_SEL_IN_RDMA2 0x4
> > +#define DSI0_SEL_IN_MASK 0x7
> > #define DSI1_SEL_IN_RDMA1 0x1
> > #define DSI1_SEL_IN_RDMA2 0x4
> > +#define DSI1_SEL_IN_MASK 0x7
> > #define DSI2_SEL_IN_RDMA1 (0x1 << 16)
> > #define DSI2_SEL_IN_RDMA2 (0x4 << 16)
> > +#define DSI2_SEL_IN_MASK (0x7 << 16)
> > #define DSI3_SEL_IN_RDMA1 (0x1 << 16)
> > #define DSI3_SEL_IN_RDMA2 (0x4 << 16)
> > +#define DSI3_SEL_IN_MASK (0x7 << 16)
> > #define COLOR1_SEL_IN_OVL1 0x1
> >
> > #define OVL_MOUT_EN_RDMA 0x1
> > #define BLS_TO_DSI_RDMA1_TO_DPI1 0x8
> > #define BLS_TO_DPI_RDMA1_TO_DSI 0x2
> > +#define BLS_RDMA1_DSI_DPI_MASK 0xf
> > #define DSI_SEL_IN_BLS 0x0
> > #define DPI_SEL_IN_BLS 0x0
> > +#define DPI_SEL_IN_MASK 0x1
> > #define DSI_SEL_IN_RDMA 0x1
> > +#define DSI_SEL_IN_MASK 0x1
> > +
> > +struct mtk_mmsys_routes {
> > + u32 from_comp;
> > + u32 to_comp;
> > + u32 addr;
> > + u32 mask;
>
> We didn't need the mask up to now, if needed in the future, we should add it
> when needed. This will make the code cleaner for now.

Agree.

>
> > + u32 val;
> > +};
> >
> > struct mtk_mmsys_driver_data {
> > const char *clk_driver;
> > + const struct mtk_mmsys_routes *routes;
> > + const unsigned int num_routes;
> > };
> >
> > static const struct mtk_mmsys_driver_data mt2701_mmsys_driver_data = {
> > @@ -93,10 +115,6 @@ static const struct mtk_mmsys_driver_data mt6797_mmsys_driver_data = {
> > .clk_driver = "clk-mt6797-mm",
> > };
> >
> > -static const struct mtk_mmsys_driver_data mt8173_mmsys_driver_data = {
> > - .clk_driver = "clk-mt8173-mm",
> > -};
> > -
> > static const struct mtk_mmsys_driver_data mt8183_mmsys_driver_data = {
> > .clk_driver = "clk-mt8183-mm",
> > };
> > @@ -106,180 +124,192 @@ struct mtk_mmsys {
> > const struct mtk_mmsys_driver_data *data;
> > };
> >
> > -static unsigned int mtk_mmsys_ddp_mout_en(enum mtk_ddp_comp_id cur,
> > - enum mtk_ddp_comp_id next,
> > - unsigned int *addr)
> > -{
> > - unsigned int value;
> > -
> > - if (cur == DDP_COMPONENT_OVL0 && next == DDP_COMPONENT_COLOR0) {
> > - *addr = DISP_REG_CONFIG_DISP_OVL0_MOUT_EN;
> > - value = OVL0_MOUT_EN_COLOR0;
> > - } else if (cur == DDP_COMPONENT_OVL0 && next == DDP_COMPONENT_RDMA0) {
> > - *addr = DISP_REG_CONFIG_DISP_OVL_MOUT_EN;
> > - value = OVL_MOUT_EN_RDMA;
> > - } else if (cur == DDP_COMPONENT_OD0 && next == DDP_COMPONENT_RDMA0) {
> > - *addr = DISP_REG_CONFIG_DISP_OD_MOUT_EN;
> > - value = OD_MOUT_EN_RDMA0;
> > - } else if (cur == DDP_COMPONENT_UFOE && next == DDP_COMPONENT_DSI0) {
> > - *addr = DISP_REG_CONFIG_DISP_UFOE_MOUT_EN;
> > - value = UFOE_MOUT_EN_DSI0;
> > - } else if (cur == DDP_COMPONENT_OVL1 && next == DDP_COMPONENT_COLOR1) {
> > - *addr = DISP_REG_CONFIG_DISP_OVL1_MOUT_EN;
> > - value = OVL1_MOUT_EN_COLOR1;
> > - } else if (cur == DDP_COMPONENT_GAMMA && next == DDP_COMPONENT_RDMA1) {
> > - *addr = DISP_REG_CONFIG_DISP_GAMMA_MOUT_EN;
> > - value = GAMMA_MOUT_EN_RDMA1;
> > - } else if (cur == DDP_COMPONENT_OD1 && next == DDP_COMPONENT_RDMA1) {
> > - *addr = DISP_REG_CONFIG_DISP_OD_MOUT_EN;
> > - value = OD1_MOUT_EN_RDMA1;
> > - } else if (cur == DDP_COMPONENT_RDMA0 && next == DDP_COMPONENT_DPI0) {
> > - *addr = DISP_REG_CONFIG_DISP_RDMA0_SOUT_EN;
> > - value = RDMA0_SOUT_DPI0;
> > - } else if (cur == DDP_COMPONENT_RDMA0 && next == DDP_COMPONENT_DPI1) {
> > - *addr = DISP_REG_CONFIG_DISP_RDMA0_SOUT_EN;
> > - value = RDMA0_SOUT_DPI1;
> > - } else if (cur == DDP_COMPONENT_RDMA0 && next == DDP_COMPONENT_DSI1) {
> > - *addr = DISP_REG_CONFIG_DISP_RDMA0_SOUT_EN;
> > - value = RDMA0_SOUT_DSI1;
> > - } else if (cur == DDP_COMPONENT_RDMA0 && next == DDP_COMPONENT_DSI2) {
> > - *addr = DISP_REG_CONFIG_DISP_RDMA0_SOUT_EN;
> > - value = RDMA0_SOUT_DSI2;
> > - } else if (cur == DDP_COMPONENT_RDMA0 && next == DDP_COMPONENT_DSI3) {
> > - *addr = DISP_REG_CONFIG_DISP_RDMA0_SOUT_EN;
> > - value = RDMA0_SOUT_DSI3;
> > - } else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DSI1) {
> > - *addr = DISP_REG_CONFIG_DISP_RDMA1_SOUT_EN;
> > - value = RDMA1_SOUT_DSI1;
> > - } else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DSI2) {
> > - *addr = DISP_REG_CONFIG_DISP_RDMA1_SOUT_EN;
> > - value = RDMA1_SOUT_DSI2;
> > - } else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DSI3) {
> > - *addr = DISP_REG_CONFIG_DISP_RDMA1_SOUT_EN;
> > - value = RDMA1_SOUT_DSI3;
> > - } else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI0) {
> > - *addr = DISP_REG_CONFIG_DISP_RDMA1_SOUT_EN;
> > - value = RDMA1_SOUT_DPI0;
> > - } else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI1) {
> > - *addr = DISP_REG_CONFIG_DISP_RDMA1_SOUT_EN;
> > - value = RDMA1_SOUT_DPI1;
> > - } else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DPI0) {
> > - *addr = DISP_REG_CONFIG_DISP_RDMA2_SOUT;
> > - value = RDMA2_SOUT_DPI0;
> > - } else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DPI1) {
> > - *addr = DISP_REG_CONFIG_DISP_RDMA2_SOUT;
> > - value = RDMA2_SOUT_DPI1;
> > - } else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DSI1) {
> > - *addr = DISP_REG_CONFIG_DISP_RDMA2_SOUT;
> > - value = RDMA2_SOUT_DSI1;
> > - } else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DSI2) {
> > - *addr = DISP_REG_CONFIG_DISP_RDMA2_SOUT;
> > - value = RDMA2_SOUT_DSI2;
> > - } else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DSI3) {
> > - *addr = DISP_REG_CONFIG_DISP_RDMA2_SOUT;
> > - value = RDMA2_SOUT_DSI3;
> > - } else {
> > - value = 0;
> > - }
> > -
> > - return value;
> > -}
> > -
> > -static unsigned int mtk_mmsys_ddp_sel_in(enum mtk_ddp_comp_id cur,
> > - enum mtk_ddp_comp_id next,
> > - unsigned int *addr)
> > -{
> > - unsigned int value;
> > -
> > - if (cur == DDP_COMPONENT_OVL0 && next == DDP_COMPONENT_COLOR0) {
> > - *addr = DISP_REG_CONFIG_DISP_COLOR0_SEL_IN;
> > - value = COLOR0_SEL_IN_OVL0;
> > - } else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI0) {
> > - *addr = DISP_REG_CONFIG_DPI_SEL_IN;
> > - value = DPI0_SEL_IN_RDMA1;
> > - } else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI1) {
> > - *addr = DISP_REG_CONFIG_DPI_SEL_IN;
> > - value = DPI1_SEL_IN_RDMA1;
> > - } else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DSI0) {
> > - *addr = DISP_REG_CONFIG_DSIE_SEL_IN;
> > - value = DSI0_SEL_IN_RDMA1;
> > - } else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DSI1) {
> > - *addr = DISP_REG_CONFIG_DSIO_SEL_IN;
> > - value = DSI1_SEL_IN_RDMA1;
> > - } else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DSI2) {
> > - *addr = DISP_REG_CONFIG_DSIE_SEL_IN;
> > - value = DSI2_SEL_IN_RDMA1;
> > - } else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DSI3) {
> > - *addr = DISP_REG_CONFIG_DSIO_SEL_IN;
> > - value = DSI3_SEL_IN_RDMA1;
> > - } else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DPI0) {
> > - *addr = DISP_REG_CONFIG_DPI_SEL_IN;
> > - value = DPI0_SEL_IN_RDMA2;
> > - } else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DPI1) {
> > - *addr = DISP_REG_CONFIG_DPI_SEL_IN;
> > - value = DPI1_SEL_IN_RDMA2;
> > - } else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DSI0) {
> > - *addr = DISP_REG_CONFIG_DSIE_SEL_IN;
> > - value = DSI0_SEL_IN_RDMA2;
> > - } else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DSI1) {
> > - *addr = DISP_REG_CONFIG_DSIO_SEL_IN;
> > - value = DSI1_SEL_IN_RDMA2;
> > - } else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DSI2) {
> > - *addr = DISP_REG_CONFIG_DSIE_SEL_IN;
> > - value = DSI2_SEL_IN_RDMA2;
> > - } else if (cur == DDP_COMPONENT_RDMA2 && next == DDP_COMPONENT_DSI3) {
> > - *addr = DISP_REG_CONFIG_DSIE_SEL_IN;
> > - value = DSI3_SEL_IN_RDMA2;
> > - } else if (cur == DDP_COMPONENT_OVL1 && next == DDP_COMPONENT_COLOR1) {
> > - *addr = DISP_REG_CONFIG_DISP_COLOR1_SEL_IN;
> > - value = COLOR1_SEL_IN_OVL1;
> > - } else if (cur == DDP_COMPONENT_BLS && next == DDP_COMPONENT_DSI0) {
> > - *addr = DISP_REG_CONFIG_DSI_SEL;
> > - value = DSI_SEL_IN_BLS;
> > - } else {
> > - value = 0;
> > +static const struct mtk_mmsys_routes mt8173_mmsys_routing_table[] = {
> > + {
> > + DDP_COMPONENT_BLS, DDP_COMPONENT_DSI0,
> > + DISP_REG_CONFIG_OUT_SEL,
> > + BLS_RDMA1_DSI_DPI_MASK, BLS_TO_DSI_RDMA1_TO_DPI1
> > + }, {
> > + DDP_COMPONENT_BLS, DDP_COMPONENT_DSI0,
> > + DISP_REG_CONFIG_DSI_SEL,
> > + DSI_SEL_IN_MASK, DSI_SEL_IN_BLS
> > + }, {
> > + DDP_COMPONENT_BLS, DDP_COMPONENT_DPI0,
> > + DISP_REG_CONFIG_OUT_SEL,
> > + BLS_RDMA1_DSI_DPI_MASK, BLS_TO_DPI_RDMA1_TO_DSI
> > + }, {
> > + DDP_COMPONENT_BLS, DDP_COMPONENT_DPI0,
> > + DISP_REG_CONFIG_DSI_SEL,
> > + DSI_SEL_IN_MASK, DSI_SEL_IN_RDMA
> > + }, {
> > + DDP_COMPONENT_BLS, DDP_COMPONENT_DPI0,
> > + DISP_REG_CONFIG_DPI_SEL,
> > + DPI_SEL_IN_MASK, DPI_SEL_IN_BLS
>
> I wonder if we could make the data structure easier to read by grouping actions
> for the same component tuple together.

Maybe if-else is the simple way to group then. Two layer array could
achieve this but it's more complicated.

>
> > + }, {
> > + DDP_COMPONENT_GAMMA, DDP_COMPONENT_RDMA1,
> > + DISP_REG_CONFIG_DISP_GAMMA_MOUT_EN,
> > + GAMMA_MOUT_EN_RDMA1, GAMMA_MOUT_EN_RDMA1
> > + }, {
> > + DDP_COMPONENT_OD0, DDP_COMPONENT_RDMA0,
> > + DISP_REG_CONFIG_DISP_OD_MOUT_EN,
> > + OD_MOUT_EN_RDMA0, OD_MOUT_EN_RDMA0
> > + }, {
> > + DDP_COMPONENT_OD1, DDP_COMPONENT_RDMA1,
> > + DISP_REG_CONFIG_DISP_OD_MOUT_EN,
> > + OD1_MOUT_EN_RDMA1, OD1_MOUT_EN_RDMA1
> > + }, {
> > + DDP_COMPONENT_OVL0, DDP_COMPONENT_COLOR0,
> > + DISP_REG_CONFIG_DISP_OVL0_MOUT_EN,
> > + OVL0_MOUT_EN_COLOR0, OVL0_MOUT_EN_COLOR0
> > + }, {
> > + DDP_COMPONENT_OVL0, DDP_COMPONENT_COLOR0,
> > + DISP_REG_CONFIG_DISP_COLOR0_SEL_IN,
> > + COLOR0_SEL_IN_OVL0, COLOR0_SEL_IN_OVL0
> > + }, {
> > + DDP_COMPONENT_OVL0, DDP_COMPONENT_RDMA0,
> > + DISP_REG_CONFIG_DISP_OVL_MOUT_EN,
> > + OVL_MOUT_EN_RDMA, OVL_MOUT_EN_RDMA
> > + }, {
> > + DDP_COMPONENT_OVL1, DDP_COMPONENT_COLOR1,
> > + DISP_REG_CONFIG_DISP_OVL1_MOUT_EN,
> > + OVL1_MOUT_EN_COLOR1, OVL1_MOUT_EN_COLOR1
> > + }, {
> > + DDP_COMPONENT_OVL1, DDP_COMPONENT_COLOR1,
> > + DISP_REG_CONFIG_DISP_COLOR1_SEL_IN,
> > + COLOR1_SEL_IN_OVL1, COLOR1_SEL_IN_OVL1
> > + }, {
> > + DDP_COMPONENT_RDMA0, DDP_COMPONENT_DPI0,
> > + DISP_REG_CONFIG_DISP_RDMA0_SOUT_EN,
> > + RDMA0_SOUT_MASK, RDMA0_SOUT_DPI0
> > + }, {
> > + DDP_COMPONENT_RDMA0, DDP_COMPONENT_DPI1,
> > + DISP_REG_CONFIG_DISP_RDMA0_SOUT_EN,
> > + RDMA0_SOUT_MASK, RDMA0_SOUT_DPI1
> > + }, {
> > + DDP_COMPONENT_RDMA0, DDP_COMPONENT_DSI1,
> > + DISP_REG_CONFIG_DISP_RDMA0_SOUT_EN,
> > + RDMA0_SOUT_MASK, RDMA0_SOUT_DSI1
> > + }, {
> > + DDP_COMPONENT_RDMA0, DDP_COMPONENT_DSI2,
> > + DISP_REG_CONFIG_DISP_RDMA0_SOUT_EN,
> > + RDMA0_SOUT_MASK, RDMA0_SOUT_DSI2
> > + }, {
> > + DDP_COMPONENT_RDMA0, DDP_COMPONENT_DSI3,
> > + DISP_REG_CONFIG_DISP_RDMA0_SOUT_EN,
> > + RDMA0_SOUT_MASK, RDMA0_SOUT_DSI3
> > + }, {
> > + DDP_COMPONENT_RDMA1, DDP_COMPONENT_DPI0,
> > + DISP_REG_CONFIG_DISP_RDMA1_SOUT_EN,
> > + RDMA1_SOUT_MASK, RDMA1_SOUT_DPI0
> > + }, {
> > + DDP_COMPONENT_RDMA1, DDP_COMPONENT_DPI0,
> > + DISP_REG_CONFIG_DPI_SEL_IN,
> > + DPI0_SEL_IN_MASK, DPI0_SEL_IN_RDMA1
> > + }, {
> > + DDP_COMPONENT_RDMA1, DDP_COMPONENT_DPI1,
> > + DISP_REG_CONFIG_DISP_RDMA1_SOUT_EN,
> > + RDMA1_SOUT_MASK, RDMA1_SOUT_DPI1
> > + }, {
> > + DDP_COMPONENT_RDMA1, DDP_COMPONENT_DPI1,
> > + DISP_REG_CONFIG_DPI_SEL_IN,
> > + DPI1_SEL_IN_MASK, DPI1_SEL_IN_RDMA1
> > + }, {
> > + DDP_COMPONENT_RDMA1, DDP_COMPONENT_DSI0,
> > + DISP_REG_CONFIG_DSIE_SEL_IN,
> > + DSI0_SEL_IN_MASK, DSI0_SEL_IN_RDMA1
> > + }, {
> > + DDP_COMPONENT_RDMA1, DDP_COMPONENT_DSI1,
> > + DISP_REG_CONFIG_DISP_RDMA1_SOUT_EN,
> > + RDMA1_SOUT_MASK, RDMA1_SOUT_DSI1
> > + }, {
> > + DDP_COMPONENT_RDMA1, DDP_COMPONENT_DSI1,
> > + DISP_REG_CONFIG_DSIO_SEL_IN,
> > + DSI1_SEL_IN_MASK, DSI1_SEL_IN_RDMA1
> > + }, {
> > + DDP_COMPONENT_RDMA1, DDP_COMPONENT_DSI2,
> > + DISP_REG_CONFIG_DISP_RDMA1_SOUT_EN,
> > + RDMA1_SOUT_MASK, RDMA1_SOUT_DSI2
> > + }, {
> > + DDP_COMPONENT_RDMA1, DDP_COMPONENT_DSI2,
> > + DISP_REG_CONFIG_DSIE_SEL_IN,
> > + DSI2_SEL_IN_MASK, DSI2_SEL_IN_RDMA1
> > + }, {
> > + DDP_COMPONENT_RDMA1, DDP_COMPONENT_DSI3,
> > + DISP_REG_CONFIG_DISP_RDMA1_SOUT_EN,
> > + RDMA1_SOUT_MASK, RDMA1_SOUT_DSI3
> > + }, {
> > + DDP_COMPONENT_RDMA1, DDP_COMPONENT_DSI3,
> > + DISP_REG_CONFIG_DSIO_SEL_IN,
> > + DSI3_SEL_IN_MASK, DSI3_SEL_IN_RDMA1
> > + }, {
> > + DDP_COMPONENT_RDMA2, DDP_COMPONENT_DPI0,
> > + DISP_REG_CONFIG_DISP_RDMA2_SOUT,
> > + RDMA2_SOUT_MASK, RDMA2_SOUT_DPI0
> > + }, {
> > + DDP_COMPONENT_RDMA2, DDP_COMPONENT_DPI0,
> > + DISP_REG_CONFIG_DPI_SEL_IN,
> > + DPI0_SEL_IN_MASK, DPI0_SEL_IN_RDMA2
> > + }, {
> > + DDP_COMPONENT_RDMA2, DDP_COMPONENT_DPI1,
> > + DISP_REG_CONFIG_DISP_RDMA2_SOUT,
> > + RDMA2_SOUT_MASK, RDMA2_SOUT_DPI1
> > + }, {
> > + DDP_COMPONENT_RDMA2, DDP_COMPONENT_DPI1,
> > + DISP_REG_CONFIG_DPI_SEL_IN,
> > + DPI1_SEL_IN_MASK, DPI1_SEL_IN_RDMA2
> > + }, {
> > + DDP_COMPONENT_RDMA2, DDP_COMPONENT_DSI0,
> > + DISP_REG_CONFIG_DSIE_SEL_IN,
> > + DSI0_SEL_IN_MASK, DSI0_SEL_IN_RDMA2
> > + }, {
> > + DDP_COMPONENT_RDMA2, DDP_COMPONENT_DSI1,
> > + DISP_REG_CONFIG_DISP_RDMA2_SOUT,
> > + RDMA2_SOUT_MASK, RDMA2_SOUT_DSI1
> > + }, {
> > + DDP_COMPONENT_RDMA2, DDP_COMPONENT_DSI1,
> > + DISP_REG_CONFIG_DSIO_SEL_IN,
> > + DSI1_SEL_IN_MASK, DSI1_SEL_IN_RDMA2
> > + }, {
> > + DDP_COMPONENT_RDMA2, DDP_COMPONENT_DSI2,
> > + DISP_REG_CONFIG_DISP_RDMA2_SOUT,
> > + RDMA2_SOUT_MASK, RDMA2_SOUT_DSI2
> > + }, {
> > + DDP_COMPONENT_RDMA2, DDP_COMPONENT_DSI2,
> > + DISP_REG_CONFIG_DSIE_SEL_IN,
> > + DSI2_SEL_IN_MASK, DSI2_SEL_IN_RDMA2
> > + }, {
> > + DDP_COMPONENT_RDMA2, DDP_COMPONENT_DSI3,
> > + DISP_REG_CONFIG_DISP_RDMA2_SOUT,
> > + RDMA2_SOUT_MASK, RDMA2_SOUT_DSI3
> > + }, {
> > + DDP_COMPONENT_RDMA2, DDP_COMPONENT_DSI3,
> > + DISP_REG_CONFIG_DSIO_SEL_IN,
> > + DSI3_SEL_IN_MASK, DSI3_SEL_IN_RDMA2
> > }
> > +};
> >
> > - return value;
> > -}
> > -
> > -static void mtk_mmsys_ddp_sout_sel(void __iomem *config_regs,
> > - enum mtk_ddp_comp_id cur,
> > - enum mtk_ddp_comp_id next)
> > -{
> > - if (cur == DDP_COMPONENT_BLS && next == DDP_COMPONENT_DSI0) {
> > - writel_relaxed(BLS_TO_DSI_RDMA1_TO_DPI1,
> > - config_regs + DISP_REG_CONFIG_OUT_SEL);
> > - } else if (cur == DDP_COMPONENT_BLS && next == DDP_COMPONENT_DPI0) {
> > - writel_relaxed(BLS_TO_DPI_RDMA1_TO_DSI,
> > - config_regs + DISP_REG_CONFIG_OUT_SEL);
> > - writel_relaxed(DSI_SEL_IN_RDMA,
> > - config_regs + DISP_REG_CONFIG_DSI_SEL);
> > - writel_relaxed(DPI_SEL_IN_BLS,
> > - config_regs + DISP_REG_CONFIG_DPI_SEL);
> > - }
> > -}
> > +static const struct mtk_mmsys_driver_data mt8173_mmsys_driver_data = {
> > + .clk_driver = "clk-mt8173-mm",
> > + .routes = mt8173_mmsys_routing_table,
> > + .num_routes = ARRAY_SIZE(mt8173_mmsys_routing_table),
> > +};
> >
> > void mtk_mmsys_ddp_connect(struct device *dev,
> > enum mtk_ddp_comp_id cur,
> > enum mtk_ddp_comp_id next)
> > {
> > struct mtk_mmsys *mmsys = dev_get_drvdata(dev);
> > - unsigned int addr, value, reg;
> > -
> > - value = mtk_mmsys_ddp_mout_en(cur, next, &addr);
> > - if (value) {
> > - reg = readl_relaxed(mmsys->regs + addr) | value;
> > - writel_relaxed(reg, mmsys->regs + addr);
> > - }
> > -
> > - mtk_mmsys_ddp_sout_sel(mmsys->regs, cur, next);
> > -
> > - value = mtk_mmsys_ddp_sel_in(cur, next, &addr);
> > - if (value) {
> > - reg = readl_relaxed(mmsys->regs + addr) | value;
> > - writel_relaxed(reg, mmsys->regs + addr);
> > - }
>
> What I don't like of this new approach is the fact, that we loose information
> about the different grouping we had up to now, mout_en, sout_sel and sel_in.

Agree. Maybe we should keep if-else model in mt8173, mt2701, mt2712.
And ask mt8183 [1] , mt8192 [2] to use if-else model.

[1] https://patchwork.kernel.org/patch/11706231/
[2] https://patchwork.kernel.org/patch/11725595/

Regards,
Chun-Kuang.

>
> Regards,
> Matthias