Re: [PATCH 0/2]cpufreq,topology,arm: disable FI for BL_SWITCHER

From: Ionela Voinescu
Date: Thu Oct 08 2020 - 12:07:11 EST


On Thursday 08 Oct 2020 at 17:18:25 (+0200), Rafael J. Wysocki wrote:
> On Thu, Oct 8, 2020 at 4:06 PM Sudeep Holla <sudeep.holla@xxxxxxx> wrote:
> >
> > On Wed, Oct 07, 2020 at 04:34:44PM +0200, Rafael J. Wysocki wrote:
> > > On Thu, Sep 24, 2020 at 2:30 PM Ionela Voinescu <ionela.voinescu@xxxxxxx> wrote:
> > > >
> > > > This series is the result of the discussions ([1], [2]) around the
> > > > complications that the BL_SWITCHER poses when it comes to Frequency
> > > > Invariance (FI) and it aims to restart the discussions.
> > > >
> > > > To properly scale its per-entity load-tracking signals, the task
> > > > scheduler needs to be given a frequency scale factor, i.e. some image of
> > > > the current frequency the CPU is running at, relative to its maximum
> > > > frequency.
> > > >
> > > > But (reiterating the message in the changelog of patch 2/2), big.LITTLE
> > > > switching complicates the setting of a correct cpufreq-based frequency
> > > > invariance scale factor due to (as observed in
> > > > drivers/cpufreq/vexpress-spc-cpufreq.c):
> > > > - Incorrect current and maximum frequencies as a result of the
> > > > exposure of a virtual frequency table to the cpufreq core,
> > > > - Missed updates as a result of asynchronous frequency adjustments
> > > > caused by frequency changes in other CPU pairs.
> > > > More information on this feature can be found at [3].
> > > >
> > > > Given that its functionality is atypical in regards to FI and that this
> > > > is an old technology, patch 2/2 disable FI for when big.LITTLE switching
> > > > is configured in to prevent incorrect scale setting.
> > > >
> > > > For this purpose patch 1/2 changes the way arch_set_freq_scale() is
> > > > defined in architecture code which brings it in line with the logic of
> > > > other architectural function definitions while allowing for less invasive
> > > > filtering of FI support.
> > > >
> > > > In the discussions at [2], three possible solutions were suggested:
> > > > - (1) conditioning FI by !CONFIG_BL_SWITCHER
> > > > - (2) leave as is with note in driver specifying this FI broken
> > > > functionality
> > > > - (3) removing full BL_SWITCHER support
> > > >
> > > > This series restructures the solution at (1). The reason for it is that
> > > > the new patch limits the ifdef filtering to the arm topology include file,
> > > > a location where frequency invariance functions are defined. Therefore,
> > > > this seems more appropriate given that the b.L switcher is an arm
> > > > technology and that the new FI filtering location seems more natural for
> > > > conditioned FI disabling.
> > > >
> > > > Solutions (2) and (3) were not implemented given that there might be some
> > > > remaining users of this technology (Samsung Chromebook 2 - Samsung Exynos
> > > > 5 Octa 5420, Samsung Exynos 5 Octa 5800) and therefore leaving this
> > > > broken (2) seems equally bad to removing support for it (3).
> > > >
> > > > [1] https://lore.kernel.org/lkml/20200701090751.7543-5-ionela.voinescu@xxxxxxx/
> > > > [2] https://lore.kernel.org/lkml/20200722093732.14297-4-ionela.voinescu@xxxxxxx/
> > > > [3] https://lwn.net/Articles/481055/
> > >
> > > I can take this set with the ACKs from Viresh if that's fine by
> > > everyone. Catalin? Sudeep?
> >
> > Acked-by: Sudeep Holla <sudeep.holla@xxxxxxx> (BL_SWITCHER and topology parts)
>
> OK, the series has been applied as 5.10 material, thanks!

Many thanks, guys!
Ionela.