[PATCH v3 0/3] Add board support for HK10 board variants

From: Gokul Sriram Palanisamy
Date: Thu Oct 08 2020 - 08:32:58 EST


Added support for HK10-C1 and HK10-C2 board variants based on IPQ8074 SoC.
Both these variants support dual QCN9000 PCIe cards that uses MHI communication
protocol over PCIe. In addition, HK10-C1 support on-chip radio.
Both these variants slightly differ in clock configuation for ethernet.

This series depends on below series:
[V2,0/7] Add PCIe support for IPQ8074
[v7,0/9] remoteproc: qcom: q6v5-wcss: Add support for secure pil

changes since v2:
- In patch 3, Moved pcie0_rp and pcie1_rp nodes and
removed unused members and subnodes

Gokul Sriram Palanisamy (3):
dt-bindings: qcom: Add ipq8074 bindings
arm64: dts: Add board support for HK10
arm64: dts: Enabled MHI device over PCIe

Documentation/devicetree/bindings/arm/qcom.yaml | 4 +
arch/arm64/boot/dts/qcom/Makefile | 2 +
arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts | 11 +++
arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts | 14 +++
arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi | 123 ++++++++++++++++++++++++
5 files changed, 154 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts
create mode 100644 arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts
create mode 100644 arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi

--
2.7.4