[PATCH] drm/radeon:fix typoes in comments

[Bernard Zhao]

Change the comment typo: "programm" -> "program".

Signed-off-by: Bernard Zhao <bernard@xxxxxxxx>
---
 drivers/gpu/drm/radeon/uvd_v1_0.c | 4 ++--
 drivers/gpu/drm/radeon/uvd_v2_2.c | 2 +-
 drivers/gpu/drm/radeon/uvd_v4_2.c | 2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/radeon/uvd_v1_0.c b/drivers/gpu/drm/radeon/uvd_v1_0.c
index 800721153d51..58557c2263a7 100644
--- a/drivers/gpu/drm/radeon/uvd_v1_0.c
+++ b/drivers/gpu/drm/radeon/uvd_v1_0.c
@@ -117,7 +117,7 @@ int uvd_v1_0_resume(struct radeon_device *rdev)
 	if (r)
 		return r;
 
-	/* programm the VCPU memory controller bits 0-27 */
+	/* program the VCPU memory controller bits 0-27 */
 	addr = (rdev->uvd.gpu_addr >> 3) + 16;
 	size = RADEON_GPU_PAGE_ALIGN(rdev->uvd_fw->size) >> 3;
 	WREG32(UVD_VCPU_CACHE_OFFSET0, addr);
@@ -360,7 +360,7 @@ int uvd_v1_0_start(struct radeon_device *rdev)
 	/* Set the write pointer delay */
 	WREG32(UVD_RBC_RB_WPTR_CNTL, 0);
 
-	/* programm the 4GB memory segment for rptr and ring buffer */
+	/* program the 4GB memory segment for rptr and ring buffer */
 	WREG32(UVD_LMI_EXT40_ADDR, upper_32_bits(ring->gpu_addr) |
 				   (0x7 << 16) | (0x1 << 31));
 
diff --git a/drivers/gpu/drm/radeon/uvd_v2_2.c b/drivers/gpu/drm/radeon/uvd_v2_2.c
index 23b18edda20e..6266167886d9 100644
--- a/drivers/gpu/drm/radeon/uvd_v2_2.c
+++ b/drivers/gpu/drm/radeon/uvd_v2_2.c
@@ -109,7 +109,7 @@ int uvd_v2_2_resume(struct radeon_device *rdev)
 	if (r)
 		return r;
 
-	/* programm the VCPU memory controller bits 0-27 */
+	/* program the VCPU memory controller bits 0-27 */
 	addr = rdev->uvd.gpu_addr >> 3;
 	size = RADEON_GPU_PAGE_ALIGN(rdev->uvd_fw->size + 4) >> 3;
 	WREG32(UVD_VCPU_CACHE_OFFSET0, addr);
diff --git a/drivers/gpu/drm/radeon/uvd_v4_2.c b/drivers/gpu/drm/radeon/uvd_v4_2.c
index dc54fa4aaea8..f9e97fa63674 100644
--- a/drivers/gpu/drm/radeon/uvd_v4_2.c
+++ b/drivers/gpu/drm/radeon/uvd_v4_2.c
@@ -40,7 +40,7 @@ int uvd_v4_2_resume(struct radeon_device *rdev)
 	uint64_t addr;
 	uint32_t size;
 
-	/* programm the VCPU memory controller bits 0-27 */
+	/* program the VCPU memory controller bits 0-27 */
 
 	/* skip over the header of the new firmware format */
 	if (rdev->uvd.fw_header_present)
-- 
2.28.0