Re: [PATCH] iio:temperature:mlx90632: Some stylefixing leftovers

From: Jonathan Cameron
Date: Sun Aug 09 2020 - 07:45:25 EST


On Thu, 6 Aug 2020 23:21:39 +0200
Crt Mori <cmo@xxxxxxxxxxx> wrote:

> There is some inconsistency and whitespace cleanup performed in this
> patch. It was done on top of my other patches, but I can rebase to head
> of the togreg branch if it would go in sooner.
>
> Signed-off-by: Crt Mori <cmo@xxxxxxxxxxx>
If not already done so, probably just add this to the other series.

If you prefer to keep it separate then remind me if I seem to have
lost this one after those patches are in place.

Thanks,

Jonathan

> ---
> drivers/iio/temperature/mlx90632.c | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/iio/temperature/mlx90632.c b/drivers/iio/temperature/mlx90632.c
> index bb35a65bb9f0..d966e5387c48 100644
> --- a/drivers/iio/temperature/mlx90632.c
> +++ b/drivers/iio/temperature/mlx90632.c
> @@ -100,10 +100,10 @@
> #define MLX90632_DSP_VERSION 5 /* DSP version */
> #define MLX90632_DSP_MASK GENMASK(7, 0) /* DSP version in EE_VERSION */
> #define MLX90632_RESET_CMD 0x0006 /* Reset sensor (address or global) */
> -#define MLX90632_REF_12 12LL /**< ResCtrlRef value of Ch 1 or Ch 2 */
> -#define MLX90632_REF_3 12LL /**< ResCtrlRef value of Channel 3 */
> -#define MLX90632_MAX_MEAS_NUM 31 /**< Maximum measurements in list */
> -#define MLX90632_SLEEP_DELAY_MS 3000 /**< Autosleep delay */
> +#define MLX90632_REF_12 12LL /* ResCtrlRef value of Ch 1 or Ch 2 */
> +#define MLX90632_REF_3 12LL /* ResCtrlRef value of Channel 3 */
> +#define MLX90632_MAX_MEAS_NUM 31 /* Maximum measurements in list */
> +#define MLX90632_SLEEP_DELAY_MS 3000 /* Autosleep delay */
> #define MLX90632_EXTENDED_LIMIT 27000 /* Extended mode raw value limit */
>
> struct mlx90632_data {
> @@ -884,7 +884,7 @@ static int mlx90632_probe(struct i2c_client *client,
> mlx90632->mtyp = MLX90632_MTYP_EXTENDED;
> } else if ((read & MLX90632_DSP_MASK) == MLX90632_DSP_VERSION) {
> dev_dbg(&client->dev,
> - "Detected Unknown EEPROM calibration %x\n", read);
> + "Detected Unknown EEPROM calibration %x\n", read);
> } else {
> dev_err(&client->dev,
> "Wrong DSP version %x (expected %x)\n",