[PATCHv3 1/6] dt-bindings: irqchip: Add PRU-ICSS interrupt controller bindings

From: Grzegorz Jaszczyk
Date: Thu Jul 02 2020 - 10:19:47 EST


From: Suman Anna <s-anna@xxxxxx>

The Programmable Real-Time Unit and Industrial Communication Subsystem
(PRU-ICSS or simply PRUSS) contains an interrupt controller (INTC) that
can handle various system input events and post interrupts back to the
device-level initiators. The INTC can support upto 64 input events on
most SoCs with individual control configuration and h/w prioritization.
These events are mapped onto 10 output interrupt lines through two levels
of many-to-one mapping support. Different interrupt lines are routed to
the individual PRU cores or to the host CPU or to other PRUSS instances.

The K3 AM65x and J721E SoCs have the next generation of the PRU-ICSS IP,
commonly called ICSSG. The ICSSG interrupt controller on K3 SoCs provide
a higher number of host interrupts (20 vs 10) and can handle an increased
number of input events (160 vs 64) from various SoC interrupt sources.

Add the bindings document for these interrupt controllers on all the
applicable SoCs. It covers the OMAP architecture SoCs - AM33xx, AM437x
and AM57xx; the Keystone 2 architecture based 66AK2G SoC; the Davinci
architecture based OMAPL138 SoCs, and the K3 architecture based AM65x
and J721E SoCs.

Signed-off-by: Suman Anna <s-anna@xxxxxx>
Signed-off-by: Andrew F. Davis <afd@xxxxxx>
Signed-off-by: Roger Quadros <rogerq@xxxxxx>
Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@xxxxxxxxxx>
Reviewed-by: Lee Jones <lee.jones@xxxxxxxxxx>
---
v2->v3:
- Convert dt-binding to YAML
v1->v2:
- https://patchwork.kernel.org/patch/11069767/
---
.../interrupt-controller/ti,pruss-intc.yaml | 135 +++++++++++++++++++++
1 file changed, 135 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml

diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml
new file mode 100644
index 0000000..7fe4b95
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/ti,pruss-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI PRU-ICSS Local Interrupt Controller
+
+maintainers:
+ - Suman Anna <s-anna@xxxxxx>
+
+description: |
+ Each PRU-ICSS has a single interrupt controller instance that is common
+ to all the PRU cores. Most interrupt controllers can route 64 input events
+ which are then mapped to 10 possible output interrupts through two levels
+ of mapping. The input events can be triggered by either the PRUs and/or
+ various other PRUSS internal and external peripherals. The first 2 output
+ interrupts (0, 1) are fed exclusively to the internal PRU cores, with the
+ remaining 8 (2 through 9) connected to external interrupt controllers
+ including the MPU and/or other PRUSS instances, DSPs or devices.
+
+ The properties "ti,irqs-reserved" and "ti,irqs-shared" are used for denoting
+ the connection differences on the output interrupts 2 through 9. If neither
+ of these properties are defined, it implies that all the PRUSS INTC output
+ interrupts 2 through 9 (host_intr0 through host_intr7) are connected
+ exclusively to the Arm interrupt controller.
+
+ The K3 family of SoCs can handle 160 input events that can be mapped to 20
+ different possible output interrupts. The additional output interrupts (10
+ through 19) are connected to new sub-modules within the ICSSG instances.
+
+ This interrupt-controller node should be defined as a child node of the
+ corresponding PRUSS node. The node should be named "interrupt-controller".
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+ - $ref: /schemas/interrupts.yaml#
+
+properties:
+ compatible:
+ enum:
+ - ti,pruss-intc
+ - ti,icssg-intc
+ description: |
+ Use "ti,pruss-intc" for OMAP-L13x/AM18x/DA850 SoCs,
+ AM335x family of SoCs,
+ AM437x family of SoCs,
+ AM57xx family of SoCs
+ 66AK2G family of SoCs
+ Use "ti,icssg-intc" for K3 AM65x & J721E family of SoCs
+
+ reg:
+ items:
+ - description: base address and size for the PRUSS INTC sub-module
+
+ interrupts:
+ minItems: 1
+ maxItems: 8
+ description: |
+ all the interrupts generated towards the main host processor in the SoC.
+ The format depends on the interrupt specifier for the particular SoC's
+ Arm parent interrupt controller. A shared interrupt can be skipped if
+ the desired destination and usage is by a different processor/device.
+
+ interrupt-names:
+ minItems: 1
+ maxItems: 8
+ items:
+ pattern: host_intr[0-7]
+ description: |
+ should use one of the above names for each valid host event interrupt
+ connected to Arm interrupt controller, the name should match the
+ corresponding host event interrupt number
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 1
+ description: |
+ Client users shall use the PRU System event number (the interrupt source
+ that the client is interested in) as the value of the interrupts property
+ in their node
+
+ ti,irqs-reserved:
+ $ref: /schemas/types.yaml#definitions/uint8-array
+ description: |
+ an array of 8-bit elements of host interrupts between 0 and 7
+ (corresponding to PRUSS INTC output interrupts 2 through 9) that are
+ not connected to the Arm interrupt controller.
+ Eg: AM437x and 66AK2G SoCs do not have "host_intr5" interrupt connected
+ to MPU
+
+ ti,irqs-shared:
+ $ref: /schemas/types.yaml#definitions/uint8-array
+ description: |
+ an array of 8-bit elements of host interrupts between 0 and 7
+ (corresponding to PRUSS INTC output interrupts 2 through 9) that are
+ also connected to other devices or processors in the SoC.
+ Eg: AM65x and J721E SoCs have "host_intr5", "host_intr6" and
+ "host_intr7" interrupts connected to MPU, and other ICSSG
+ instances
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - interrupt-controller
+ - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ /* AM33xx PRU-ICSS */
+ pruss: pruss@0 {
+ compatible = "ti,am3356-pruss";
+ reg = <0x0 0x80000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pruss_intc: interrupt-controller@20000 {
+ compatible = "ti,pruss-intc";
+ reg = <0x20000 0x2000>;
+ interrupts = <20 21 22 23 24 25 26 27>;
+ interrupt-names = "host_intr0", "host_intr1",
+ "host_intr2", "host_intr3",
+ "host_intr4", "host_intr5",
+ "host_intr6", "host_intr7";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ ti,irqs-shared = /bits/ 8 <0 6 7>;
+ };
+ };
--
2.7.4