Re: [PATCH] ath10k: Wait until copy complete is actually done before completing

From: Kalle Valo
Date: Mon Jun 15 2020 - 10:56:36 EST


Doug Anderson <dianders@xxxxxxxxxxxx> writes:

> On Mon, Jun 15, 2020 at 7:32 AM Kalle Valo <kvalo@xxxxxxxxxxxxxx> wrote:
>>
>> Douglas Anderson <dianders@xxxxxxxxxxxx> wrote:
>>
>> > On wcn3990 we have "per_ce_irq = true". That makes the
>> > ath10k_ce_interrupt_summary() function always return 0xfff. The
>> > ath10k_ce_per_engine_service_any() function will see this and think
>> > that _all_ copy engines have an interrupt. Without checking, the
>> > ath10k_ce_per_engine_service() assumes that if it's called that the
>> > "copy complete" (cc) interrupt fired. This combination seems bad.
>> >
>> > Let's add a check to make sure that the "copy complete" interrupt
>> > actually fired in ath10k_ce_per_engine_service().
>> >
>> > This might fix a hard-to-reproduce failure where it appears that the
>> > copy complete handlers run before the copy is really complete.
>> > Specifically a symptom was that we were seeing this on a Qualcomm
>> > sc7180 board:
>> > arm-smmu 15000000.iommu: Unhandled context fault:
>> > fsr=0x402, iova=0x7fdd45780, fsynr=0x30003, cbfrsynra=0xc1, cb=10
>> >
>> > Even on platforms that don't have wcn3990 this still seems like it
>> > would be a sane thing to do. Specifically the current IRQ handler
>> > comments indicate that there might be other misc interrupt sources
>> > firing that need to be cleared. If one of those sources was the one
>> > that caused the IRQ handler to be called it would also be important to
>> > double-check that the interrupt we cared about actually fired.
>> >
>> > Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
>> > Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
>>
>> ath10k firmwares work very differently, on what hardware and firmware did you
>> test this? I'll add that information to the commit log.
>
> I am running on a Qualcomm sc7180 SoC.

Sorry, I was unclear, I meant the ath10k hardware :) I guess WCN3990 but
what firmware version?

--
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches