[PATCH v5 20/27] clk: bcm: rpi: Add an enum for the firmware clocks

[Maxime Ripard]

While the firmware allows us to discover the available clocks, we need to
discriminate those clocks to only register the ones meaningful to Linux.
The firmware also doesn't provide a clock name, so having a list of the ID
will help us to give clocks a proper name later on.

Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>
---
 drivers/clk/bcm/clk-raspberrypi.c | 23 +++++++++++++++++++----
 1 file changed, 19 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/bcm/clk-raspberrypi.c b/drivers/clk/bcm/clk-raspberrypi.c
index 5f4e2d49432f..eebd16040f8a 100644
--- a/drivers/clk/bcm/clk-raspberrypi.c
+++ b/drivers/clk/bcm/clk-raspberrypi.c
@@ -18,7 +18,23 @@
 
 #include <soc/bcm2835/raspberrypi-firmware.h>
 
-#define RPI_FIRMWARE_ARM_CLK_ID		0x00000003
+enum rpi_firmware_clk_id {
+	RPI_FIRMWARE_EMMC_CLK_ID = 1,
+	RPI_FIRMWARE_UART_CLK_ID,
+	RPI_FIRMWARE_ARM_CLK_ID,
+	RPI_FIRMWARE_CORE_CLK_ID,
+	RPI_FIRMWARE_V3D_CLK_ID,
+	RPI_FIRMWARE_H264_CLK_ID,
+	RPI_FIRMWARE_ISP_CLK_ID,
+	RPI_FIRMWARE_SDRAM_CLK_ID,
+	RPI_FIRMWARE_PIXEL_CLK_ID,
+	RPI_FIRMWARE_PWM_CLK_ID,
+	RPI_FIRMWARE_HEVC_CLK_ID,
+	RPI_FIRMWARE_EMMC2_CLK_ID,
+	RPI_FIRMWARE_M2MC_CLK_ID,
+	RPI_FIRMWARE_PIXEL_BVB_CLK_ID,
+	RPI_FIRMWARE_NUM_CLK_ID,
+};
 
 #define RPI_FIRMWARE_STATE_ENABLE_BIT	BIT(0)
 #define RPI_FIRMWARE_STATE_WAIT_BIT	BIT(1)
@@ -31,8 +47,6 @@
 
 #define A2W_PLL_FRAC_BITS		20
 
-#define NUM_FW_CLKS			16
-
 struct raspberrypi_clk {
 	struct device *dev;
 	struct rpi_firmware *firmware;
@@ -320,7 +334,8 @@ static int raspberrypi_clk_probe(struct platform_device *pdev)
 	rpi->firmware = firmware;
 	platform_set_drvdata(pdev, rpi);
 
-	clk_data = devm_kzalloc(dev, struct_size(clk_data, hws, NUM_FW_CLKS),
+	clk_data = devm_kzalloc(dev, struct_size(clk_data, hws,
+						 RPI_FIRMWARE_NUM_CLK_ID),
 				GFP_KERNEL);
 	if (!clk_data)
 		return -ENOMEM;
-- 
git-series 0.9.1