Re: [PATCH 0/6] arm64: dts: qcom: smmu/USB nodes and HDK855/HDK865 dts

[Jonathan Marek]

On 6/11/20 2:05 PM, Manivannan Sadhasivam wrote:
> On Thu, Jun 04, 2020 at 07:22:21PM +0530, Manivannan Sadhasivam wrote:
> > Hi,
> >
> > On Sat, May 23, 2020 at 10:38:06PM -0400, Jonathan Marek wrote:
> > > Add dts nodes for apps_smmu and USB for both sm8150 and sm8250.
> >
> > I've tested this series on an SM8250 based board and able to get Type C (USB0)
> > working. There are also couple of Type A ports (USB1) on that board behind a
> > USB hub. It is probing fine but I don't see any activity while connecting a
> > USB device. Will continue to debug and once I get them working, I'll add my
> > Tested-by tag.
>
> So it turned out that I forgot to enable one regulator which kept the USB hub
> powered down. After enabling that, both Type A ports are working. Hence,
>
> Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
>
> Thanks,
> Mani

Thanks for testing it. Your Tested-by only applies to the relevant 
patches (patches 2 and 4 in this version) right? And can I also add your 
Tested-by tag to my other series 
(https://patchwork.kernel.org/cover/11567095/) which this depends on?

> > Thanks,
> > Mani
> >
> > > Also add initial dts files for HDK855 and HDK865, based on mtp dts, with a
> > > few changes. Notably, the HDK865 dts has regulator config changed a bit based
> > > on downstream (I think sm8250-mtp.dts is wrong and copied too much from sm8150).
> > >
> > > Jonathan Marek (6):
> > >    arm64: dts: qcom: sm8150: add apps_smmu node
> > >    arm64: dts: qcom: sm8250: add apps_smmu node
> > >    arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes
> > >    arm64: dts: qcom: sm8250: Add USB and PHY device nodes
> > >    arm64: dts: qcom: add sm8150 hdk dts
> > >    arm64: dts: qcom: add sm8250 hdk dts
> > >
> > >   arch/arm64/boot/dts/qcom/Makefile       |   2 +
> > >   arch/arm64/boot/dts/qcom/sm8150-hdk.dts | 461 ++++++++++++++++++++++++
> > >   arch/arm64/boot/dts/qcom/sm8150.dtsi    | 180 +++++++++
> > >   arch/arm64/boot/dts/qcom/sm8250-hdk.dts | 454 +++++++++++++++++++++++
> > >   arch/arm64/boot/dts/qcom/sm8250.dtsi    | 287 +++++++++++++++
> > >   5 files changed, 1384 insertions(+)
> > >   create mode 100644 arch/arm64/boot/dts/qcom/sm8150-hdk.dts
> > >   create mode 100644 arch/arm64/boot/dts/qcom/sm8250-hdk.dts
> > >
> > > --
> > > 2.26.1