Re: [PATCH v4 02/11] mfd: Add support for Kontron sl28cpld management controller

[Michael Walle]

Am 2020-06-10 09:19, schrieb Lee Jones:
> On Wed, 10 Jun 2020, Michael Walle wrote:
> > Am 2020-06-09 21:45, schrieb Lee Jones:
> > > On Tue, 09 Jun 2020, Michael Walle wrote:
> > > > > We do not need a 'simple-regmap' solution for your use-case.
> > > > >
> > > > > Since your device's registers are segregated, just split up the
> > > > > register map and allocate each sub-device with it's own slice.
> > > >
> > > > I don't get it, could you make a device tree example for my
> > > > use-case? (see also above)
> > >
> > >     &i2cbus {
> > >         mfd-device@10 {
> > >             compatible = "simple-mfd";
> > >             reg = <10>;
> > >
> > >             sub-device@10 {
> > >                 compatible = "vendor,sub-device";
> > >                 reg = <10>;
> > >             };
> > >    };
> > >
> > > The Regmap config would be present in each of the child devices.
> > >
> > > Each child device would call devm_regmap_init_i2c() in .probe().
> >
> > Ah, I see. If I'm not wrong, this still means to create an i2c
> > device driver with the name "simple-mfd".
>
> Yes, it does.
>
> > Besides that, I don't like this, because:
> >  - Rob already expressed its concerns with "simple-mfd" and so on.
>
> Where did this take place?  I'd like to read up on this.

In this thread:
https://lore.kernel.org/linux-devicetree/20200604211039.12689-1-michael@xxxxxxxx/T/#m16fdba5962069e7cd4aa817582ee358c9fe2ecbf

> >  - you need to duplicate the config in each sub device
>
> You can have a share a single config.
>
> >  - which also means you are restricting the sub devices to be
> >    i2c only (unless you implement and duplicate other regmap configs,
> >    too). For this driver, SPI and MMIO may be viable options.
>
> You could also have a shared implementation to choose between different
> busses.

Then what is the difference between to have this shared config in the
parent driver only and use the functions which are already there, i.e.
dev_get_regmap(parent). But see, below, I'll wait with what you're
coming up.

> > Thus, I'd rather implement a simple-mfd.c which implement a common
> > I2C driver for now and populate its children using
> > devm_of_platform_populate(). This could be extended to support other
> > type of regmaps like SPI in the future.
> >
> > Also some MFD drivers could be moved to this, a likely candidate is
> > the smsc-ece1099.c. Although I don't really understand its purpose,
> > if don't have CONFIG_OF.
> >
> > Judging from the existing code, this simple-mfd.c wouldn't just be
> > "a list of compatible" strings but also additional quirks and tweaks
> > for particular devices in this list.
>
> Hold off on the simple-mfd.c idea, as I'm not taken by it yet and
> wouldn't want you to waste your time.  I have another idea which would
> help.  Give me a few days to put something together.

Sure. I'm just glad there is now a discussion about this issue.

-michael