Re: (EXT) [PATCH v9 RESEND 00/13] add ecspi ERR009165 for i.mx6/7 soc family

From: Matthias Schiffer
Date: Mon Jun 08 2020 - 05:11:58 EST


On Sun, 2020-06-07 at 07:21 +0800, Robin Gong wrote:
> There is ecspi ERR009165 on i.mx6/7 soc family, which cause FIFO
> transfer to be send twice in DMA mode. Please get more information
> from:
> https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf. The workaround is
> adding
> new sdma ram script which works in XCH mode as PIO inside sdma
> instead
> of SMC mode, meanwhile, 'TX_THRESHOLD' should be 0. The issue should
> be
> exist on all legacy i.mx6/7 soc family before i.mx6ul.
> NXP fix this design issue from i.mx6ul, so newer chips including
> i.mx6ul/
> 6ull/6sll do not need this workaroud anymore. All other i.mx6/7/8
> chips
> still need this workaroud. This patch set add new 'fsl,imx6ul-ecspi'
> for ecspi driver and 'ecspi_fixed' in sdma driver to choose if need
> errata
> or not.
> The first two reverted patches should be the same issue, though, it
> seems 'fixed' by changing to other shp script. Hope Sean or Sascha
> could
> have the chance to test this patch set if could fix their issues.
> Besides, enable sdma support for i.mx8mm/8mq and fix ecspi1 not work
> on i.mx8mm because the event id is zero.


Tested-by: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx>


>
> PS:
> Please get sdma firmware from below linux-firmware and copy it to
> your
> local rootfs /lib/firmware/imx/sdma.
>
https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/imx/sdma
>
> v2:
> 1.Add commit log for reverted patches.
> 2.Add comment for 'ecspi_fixed' in sdma driver.
> 3.Add 'fsl,imx6sll-ecspi' compatible instead of 'fsl,imx6ul-ecspi'
> rather than remove.
> v3:
> 1.Confirm with design team make sure ERR009165 fixed on
> i.mx6ul/i.mx6ull
> /i.mx6sll, not fixed on i.mx8m/8mm and other i.mx6/7 legacy
> chips.
> Correct dts related dts patch in v2.
> 2.Clean eratta information in binding doc and new 'tx_glitch_fixed'
> flag
> in spi-imx driver to state ERR009165 fixed or not.
> 3.Enlarge burst size to fifo size for tx since tx_wml set to 0 in
> the
> errata workaroud, thus improve performance as possible.
> v4:
> 1.Add Ack tag from Mark and Vinod
> 2.Remove checking 'event_id1' zero as 'event_id0'.
> v5:
> 1.Add the last patch for compatible with the current uart driver
> which
> using rom script, so both uart ram script and rom script
> supported
> in latest firmware, by default uart rom script used. UART driver
> will be broken without this patch.
> v6:
> 1.Resend after rebase the latest next branch.
> 2.Remove below No.13~No.15 patches of v5 because they were
> mergered.
> ARM: dts: imx6ul: add dma support on ecspi
> ARM: dts: imx6sll: correct sdma compatible
> arm64: defconfig: Enable SDMA on i.mx8mq/8mm
> 3.Revert "dmaengine: imx-sdma: fix context cache" since
> 'context_loaded' removed.
> v7:
> 1.Put the last patch 13/13 'Revert "dmaengine: imx-sdma: fix
> context
> cache"' to the ahead of 03/13 'Revert "dmaengine: imx-sdma:
> refine
> to load context only once" so that no building waring during
> comes out
> during bisect.
> 2.Address Sascha's comments, including eliminating any i.mx6sx in
> this
> series, adding new 'is_imx6ul_ecspi()' instead imx in imx51 and
> taking
> care SMC bit for PIO.
> 3.Add back missing 'Reviewed-by' tag on 08/15(v5):09/13(v7)
> 'spi: imx: add new i.mx6ul compatible name in binding doc'
> v8:
> 1.remove 0003-Revert-dmaengine-imx-sdma-fix-context-cache.patch and
> merge
> it into 04/13 of v7
> 2.add 0005-spi-imx-fallback-to-PIO-if-dma-setup-failure.patch for
> no any
> ecspi function broken even if sdma firmware not updated.
> 3.merge 'tx.dst_maxburst' changes in the two continous patches into
> one
> patch to avoid confusion.
> 4.fix typo 'duplicated'.
> v9:
> 1. add "spi: imx: add dma_sync_sg_for_device after fallback from
> dma"
> to fix the potential issue brought by commit bcd8e7761ec9("spi:
> imx:
> fallback to PIO if dma setup failure") which is the only one
> patch
> of v8 merged. Thanks Matthias for reporting:
>
> https://lore.kernel.org/linux-arm-kernel/5d246dd81607bb6e5cb9af86ad4e53f7a7a99c50.camel@xxxxxxxxxxxxxxx/
> 2. remove 05/13 of v8 "spi: imx:fallback to PIO if dma setup
> failure"
> since it's been merged.
>
> Robin Gong (13):
> spi: imx: add dma_sync_sg_for_device after fallback from dma
> Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"
> Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"
> Revert "dmaengine: imx-sdma: refine to load context only once"
> dmaengine: imx-sdma: remove duplicated sdma_load_context
> dmaengine: imx-sdma: add mcu_2_ecspi script
> spi: imx: fix ERR009165
> spi: imx: remove ERR009165 workaround on i.mx6ul
> spi: imx: add new i.mx6ul compatible name in binding doc
> dmaengine: imx-sdma: remove ERR009165 on i.mx6ul
> dma: imx-sdma: add i.mx6ul compatible name
> dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm
> dmaengine: imx-sdma: add uart rom script
>
> .../devicetree/bindings/dma/fsl-imx-sdma.txt | 1 +
> .../devicetree/bindings/spi/fsl-imx-cspi.txt | 1 +
> arch/arm/boot/dts/imx6q.dtsi | 2 +-
> arch/arm/boot/dts/imx6qdl.dtsi | 8 +--
> drivers/dma/imx-sdma.c | 67
> ++++++++++++--------
> drivers/spi/spi-imx.c | 73
> +++++++++++++++++++---
> include/linux/platform_data/dma-imx-sdma.h | 8 ++-
> 7 files changed, 120 insertions(+), 40 deletions(-)
>