[PATCH v13 10/16] x86/entry/64: Introduce the FIND_PERCPU_BASE macro

From: Sasha Levin
Date: Thu May 28 2020 - 16:16:29 EST


From: "Chang S. Bae" <chang.seok.bae@xxxxxxxxx>

GSBASE is used to find per-CPU data in the kernel. But when GSBASE is
unknown, the per-CPU base can be found from the per_cpu_offset table with a
CPU NR. The CPU NR is extracted from the limit field of the CPUNODE entry
in GDT, or by the RDPID instruction. This is a prerequisite for using
FSGSBASE in the low level entry code.

Also, add the GAS-compatible RDPID macro as binutils 2.21 do not support
it. Support is added in version 2.27.

[ tglx: Massaged changelog ]

Suggested-by: H. Peter Anvin <hpa@xxxxxxxxx>
Signed-off-by: Chang S. Bae <chang.seok.bae@xxxxxxxxx>
Signed-off-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: Andy Lutomirski <luto@xxxxxxxxxx>
Cc: Andi Kleen <ak@xxxxxxxxxxxxxxx>
Cc: Ravi Shankar <ravi.v.shankar@xxxxxxxxx>
Cc: Dave Hansen <dave.hansen@xxxxxxxxxxxxxxx>
Link: https://lkml.kernel.org/r/1557309753-24073-12-git-send-email-chang.seok.bae@xxxxxxxxx
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
arch/x86/entry/calling.h | 34 ++++++++++++++++++++++++++++++++++
arch/x86/include/asm/inst.h | 15 +++++++++++++++
2 files changed, 49 insertions(+)

diff --git a/arch/x86/entry/calling.h b/arch/x86/entry/calling.h
index 1c7f13bb6728..1b95cdc19b18 100644
--- a/arch/x86/entry/calling.h
+++ b/arch/x86/entry/calling.h
@@ -6,6 +6,7 @@
#include <asm/percpu.h>
#include <asm/asm-offsets.h>
#include <asm/processor-flags.h>
+#include <asm/inst.h>

/*

@@ -349,6 +350,39 @@ For 32-bit we have the following conventions - kernel is built with
#endif
.endm

+#ifdef CONFIG_SMP
+
+/*
+ * CPU/node NR is loaded from the limit (size) field of a special segment
+ * descriptor entry in GDT.
+ */
+.macro LOAD_CPU_AND_NODE_SEG_LIMIT reg:req
+ movq $__CPUNODE_SEG, \reg
+ lsl \reg, \reg
+.endm
+
+/*
+ * Fetch the per-CPU GSBASE value for this processor and put it in @reg.
+ * We normally use %gs for accessing per-CPU data, but we are setting up
+ * %gs here and obviously can not use %gs itself to access per-CPU data.
+ */
+.macro GET_PERCPU_BASE reg:req
+ ALTERNATIVE \
+ "LOAD_CPU_AND_NODE_SEG_LIMIT \reg", \
+ "RDPID \reg", \
+ X86_FEATURE_RDPID
+ andq $VDSO_CPUNODE_MASK, \reg
+ movq __per_cpu_offset(, \reg, 8), \reg
+.endm
+
+#else
+
+.macro GET_PERCPU_BASE reg:req
+ movq pcpu_unit_offsets(%rip), \reg
+.endm
+
+#endif /* CONFIG_SMP */
+
/*
* This does 'call enter_from_user_mode' unless we can avoid it based on
* kernel config or using the static jump infrastructure.
diff --git a/arch/x86/include/asm/inst.h b/arch/x86/include/asm/inst.h
index f5a796da07f8..d063841a17e3 100644
--- a/arch/x86/include/asm/inst.h
+++ b/arch/x86/include/asm/inst.h
@@ -306,6 +306,21 @@
.endif
MODRM 0xc0 movq_r64_xmm_opd1 movq_r64_xmm_opd2
.endm
+
+.macro RDPID opd
+ REG_TYPE rdpid_opd_type \opd
+ .if rdpid_opd_type == REG_TYPE_R64
+ R64_NUM rdpid_opd \opd
+ .else
+ R32_NUM rdpid_opd \opd
+ .endif
+ .byte 0xf3
+ .if rdpid_opd > 7
+ PFX_REX rdpid_opd 0
+ .endif
+ .byte 0x0f, 0xc7
+ MODRM 0xc0 rdpid_opd 0x7
+.endm
#endif

#endif
--
2.25.1