[PATCH v3 1/5] dt-bindings: iio: imu: bmi160: convert txt format to yaml

From: Jonathan Albrieux
Date: Wed May 20 2020 - 15:47:59 EST


Converts documentation from txt format to yaml.

Signed-off-by: Jonathan Albrieux <jonathan.albrieux@xxxxxxxxx>
---
.../devicetree/bindings/iio/imu/bmi160.txt | 37 ---------
.../bindings/iio/imu/bosch,bmi160.yaml | 76 +++++++++++++++++++
2 files changed, 76 insertions(+), 37 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/iio/imu/bmi160.txt
create mode 100644 Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml

diff --git a/Documentation/devicetree/bindings/iio/imu/bmi160.txt b/Documentation/devicetree/bindings/iio/imu/bmi160.txt
deleted file mode 100644
index 900c169de00f..000000000000
--- a/Documentation/devicetree/bindings/iio/imu/bmi160.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Bosch BMI160 - Inertial Measurement Unit with Accelerometer, Gyroscope
-and externally connectable Magnetometer
-
-https://www.bosch-sensortec.com/bst/products/all_products/bmi160
-
-Required properties:
- - compatible : should be "bosch,bmi160"
- - reg : the I2C address or SPI chip select number of the sensor
- - spi-max-frequency : set maximum clock frequency (only for SPI)
-
-Optional properties:
- - interrupts : interrupt mapping for IRQ
- - interrupt-names : set to "INT1" if INT1 pin should be used as interrupt
- input, set to "INT2" if INT2 pin should be used instead
- - drive-open-drain : set if the specified interrupt pin should be configured as
- open drain. If not set, defaults to push-pull.
-
-Examples:
-
-bmi160@68 {
- compatible = "bosch,bmi160";
- reg = <0x68>;
-
- interrupt-parent = <&gpio4>;
- interrupts = <12 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "INT1";
-};
-
-bmi160@0 {
- compatible = "bosch,bmi160";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- interrupt-parent = <&gpio2>;
- interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
- interrupt-names = "INT2";
-};
diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
new file mode 100644
index 000000000000..46cb4fde1165
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/bosch,bmi160.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BMI160
+
+maintainers:
+ - Daniel Baluta <daniel.baluta@xxxxxxx> (?)
+
+description: |
+ Inertial Measurement Unit with Accelerometer, Gyroscope and externally
+ connectable Magnetometer
+ https://www.bosch-sensortec.com/bst/products/all_products/bmi160
+
+properties:
+ compatible:
+ const: bosch,bmi160
+
+ reg:
+ maxItems: 1
+
+ spi-max-frequency:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-names:
+ enum:
+ - INT1
+ - INT2
+ description: |
+ set to "INT1" if INT1 pin should be used as interrupt input, set
+ to "INT2" if INT2 pin should be used instead
+
+ drive-open-drain:
+ description: |
+ set if the specified interrupt pin should be configured as
+ open drain. If not set, defaults to push-pull.
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ // Example for I2C
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bmi160@68 {
+ compatible = "bosch,bmi160";
+ reg = <0x68>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <12 1>;
+ interrupt-names = "INT1";
+ };
+ };
+ - |
+ // Example for SPI
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bmi160@0 {
+ compatible = "bosch,bmi160";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <12 1>;
+ interrupt-names = "INT2";
+ };
+ };
--
2.17.1