Re: [PATCH v2 4/4] arch/x86: Add L1D flushing Documentation

From: Randy Dunlap
Date: Tue May 19 2020 - 11:39:57 EST


Hi--

Comments below. Sorry about the delay.

On 4/5/20 8:19 PM, Balbir Singh wrote:
> Add documentation of l1d flushing, explain the need for the
> feature and how it can be used.
>
> Signed-off-by: Balbir Singh <sblbir@xxxxxxxxxx>
> ---
> Documentation/admin-guide/hw-vuln/index.rst | 1 +
> .../admin-guide/hw-vuln/l1d_flush.rst | 40 +++++++++++++++++++
> 2 files changed, 41 insertions(+)
> create mode 100644 Documentation/admin-guide/hw-vuln/l1d_flush.rst

> diff --git a/Documentation/admin-guide/hw-vuln/l1d_flush.rst b/Documentation/admin-guide/hw-vuln/l1d_flush.rst
> new file mode 100644
> index 000000000000..73ee9e491a74
> --- /dev/null
> +++ b/Documentation/admin-guide/hw-vuln/l1d_flush.rst
> @@ -0,0 +1,40 @@
> +L1D Flushing for the paranoid
> +=============================
> +
> +With an increasing number of vulnerabilities being reported around data
> +leaks from L1D, a new user space mechanism to flush the L1D cache on
> +context switch is added to the kernel. This should help address
> +CVE-2020-0550 and for paranoid applications, keep them safe from any
> +yet to be discovered vulnerabilities, related to leaks from the L1D
> +cache.
> +
> +Tasks can opt in to this mechanism by using an architecture specific
> +prctl (x86 only at the moment).
> +
> +Related CVES

CVEs

> +------------
> +At the present moment, the following CVEs can be addressed by this
> +mechanism
> +
> + ============= ======================== ==================
> + CVE-2020-0550 Improper Data Forwarding OS related aspects
> + ============= ======================== ==================
> +
> +Usage Guidelines
> +----------------
> +Applications can call ``arch_prctl(2)`` with one of these two arguments

end above sentence with period or colon (colon might require the following
bullet items to be indented -- I'm not sure about that).

> +
> +1. ARCH_SET_L1D_FLUSH - flush the L1D cache on context switch (out)
> +2. ARCH_GET_L1D_FLUSH - get the current state of the L1D cache flush, returns 1
> + if set and 0 if not set.
> +
> +**NOTE**: The feature is disabled by default, applications to need to specifically

default; applications need to

> +opt into the feature to enable it.
> +
> +Mitigation
> +----------
> +When ARCH_SET_L1D_FLUSH is enabled for a task, on switching tasks (when
> +the address space changes), a flush of the L1D cache is performed for
> +the task when it leaves the CPU. If the underlying CPU supports L1D
> +flushing in hardware, the hardware mechanism is used, otherwise a software
> +fallback, similar to the mechanism used by L1TF is used.
>

thanks.
--
~Randy