Re: [PATCH v3 09/14] remoteproc: Deal with synchronisation when crashing

[Mathieu Poirier]

On Wed, Apr 29, 2020 at 09:44:02AM +0200, Arnaud POULIQUEN wrote:
> Hi Mathieu,
> 
> On 4/24/20 10:01 PM, Mathieu Poirier wrote:
> > Refactor function rproc_trigger_recovery() in order to avoid
> > reloading the firmware image when synchronising with a remote
> > processor rather than booting it.  Also part of the process,
> > properly set the synchronisation flag in order to properly
> > recover the system.
> > 
> > Signed-off-by: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
> > ---
> >  drivers/remoteproc/remoteproc_core.c     | 23 ++++++++++++++------
> >  drivers/remoteproc/remoteproc_internal.h | 27 ++++++++++++++++++++++++
> >  2 files changed, 43 insertions(+), 7 deletions(-)
> > 
> > diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
> > index ef88d3e84bfb..3a84a38ba37b 100644
> > --- a/drivers/remoteproc/remoteproc_core.c
> > +++ b/drivers/remoteproc/remoteproc_core.c
> > @@ -1697,7 +1697,7 @@ static void rproc_coredump(struct rproc *rproc)
> >   */
> >  int rproc_trigger_recovery(struct rproc *rproc)
> >  {
> > -	const struct firmware *firmware_p;
> > +	const struct firmware *firmware_p = NULL;
> >  	struct device *dev = &rproc->dev;
> >  	int ret;
> >  
> > @@ -1718,14 +1718,16 @@ int rproc_trigger_recovery(struct rproc *rproc)
> >  	/* generate coredump */
> >  	rproc_coredump(rproc);
> >  
> > -	/* load firmware */
> > -	ret = request_firmware(&firmware_p, rproc->firmware, dev);
> > -	if (ret < 0) {
> > -		dev_err(dev, "request_firmware failed: %d\n", ret);
> > -		goto unlock_mutex;
> > +	/* load firmware if need be */
> > +	if (!rproc_needs_syncing(rproc)) {
> > +		ret = request_firmware(&firmware_p, rproc->firmware, dev);
> > +		if (ret < 0) {
> > +			dev_err(dev, "request_firmware failed: %d\n", ret);
> > +			goto unlock_mutex;
> > +		}
> 
> If we started in syncing mode then rpoc->firmware is null
> rproc_set_sync_flag(rproc, RPROC_SYNC_STATE_CRASHED) can make rproc_needs_syncing(rproc)
> false. 

You are correct, I will add an additional check in rproc_set_machine() to
prevent a situation where rproc_alloc() has been called without an ops and any
of the synchronisation flags are set to false.

It is also possible that someone would call proc_alloc() without an ops and
doesn't call rproc_set_state_machine(), in which case both ops and sync_ops
would be NULL.  Adding a check in rproc_add() is probably the best location to
catch such a condition.


> In this case here we fail the recovery an leave in RPROC_STOP state.
> As you proposed in Loic RFC[1], what about adding a more explicit message to inform that the recovery
> failed. 

Right, that's a different problem.

> 
> [1]https://lkml.org/lkml/2020/3/11/402
> 
> Regards,
> Arnaud
> >  	}
> >  
> > -	/* boot the remote processor up again */
> > +	/* boot up or synchronise with the remote processor again */
> >  	ret = rproc_start(rproc, firmware_p);
> >  
> >  	release_firmware(firmware_p);
> > @@ -1761,6 +1763,13 @@ static void rproc_crash_handler_work(struct work_struct *work)
> >  	dev_err(dev, "handling crash #%u in %s\n", ++rproc->crash_cnt,
> >  		rproc->name);
> >  
> > +	/*
> > +	 * The remote processor has crashed - tell the core what operation
> > +	 * to use from hereon, i.e whether an external entity will reboot
> > +	 * the MCU or it is now the remoteproc core's responsability.
> > +	 */
> > +	rproc_set_sync_flag(rproc, RPROC_SYNC_STATE_CRASHED);
> > +
> >  	mutex_unlock(&rproc->lock);
> >  
> >  	if (!rproc->recovery_disabled)
> > diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h
> > index 3985c084b184..61500981155c 100644
> > --- a/drivers/remoteproc/remoteproc_internal.h
> > +++ b/drivers/remoteproc/remoteproc_internal.h
> > @@ -24,6 +24,33 @@ struct rproc_debug_trace {
> >  	struct rproc_mem_entry trace_mem;
> >  };
> >  
> > +/*
> > + * enum rproc_sync_states - remote processsor sync states
> > + *
> > + * @RPROC_SYNC_STATE_CRASHED	state to use after the remote processor
> > + *				has crashed but has not been recovered by
> > + *				the remoteproc core yet.
> > + *
> > + * Keeping these separate from the enum rproc_state in order to avoid
> > + * introducing coupling between the state of the MCU and the synchronisation
> > + * operation to use.
> > + */
> > +enum rproc_sync_states {
> > +	RPROC_SYNC_STATE_CRASHED,
> > +};
> > +
> > +static inline void rproc_set_sync_flag(struct rproc *rproc,
> > +				       enum rproc_sync_states state)
> > +{
> > +	switch (state) {
> > +	case RPROC_SYNC_STATE_CRASHED:
> > +		rproc->sync_with_rproc = rproc->sync_flags.after_crash;
> > +		break;
> > +	default:
> > +		break;
> > +	}
> > +}
> > +
> >  /* from remoteproc_core.c */
> >  void rproc_release(struct kref *kref);
> >  irqreturn_t rproc_vq_interrupt(struct rproc *rproc, int vq_id);
> >