Re: [PATCH 1/2] dt-bindings: soc: qcom: Add devicetree binding for Qcom IPCC

From: Bjorn Andersson
Date: Thu Apr 30 2020 - 15:35:35 EST


On Wed 29 Apr 23:30 PDT 2020, Manivannan Sadhasivam wrote:

> Add devicetree YAML binding for Qualcomm Inter-Processor Communication
> Controller (IPCC) block.
>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> ---
> .../bindings/soc/qcom/qcom,ipcc.yaml | 85 +++++++++++++++++++

How about putting this in either interrupt-controller/ or mailbox/ instead?

> include/dt-bindings/soc/qcom,ipcc.h | 38 +++++++++
> 2 files changed, 123 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,ipcc.yaml
> create mode 100644 include/dt-bindings/soc/qcom,ipcc.h
>
> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,ipcc.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,ipcc.yaml
> new file mode 100644
> index 000000000000..48b281181401
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,ipcc.yaml
> @@ -0,0 +1,85 @@
> +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/soc/qcom/qcom,ipcc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Technologies, Inc. Inter-Processor Communication Controller
> +
> +maintainers:
> + - Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> +
> +description:
> + The Inter-Processor Communication Controller (IPCC) is a centralized hardware
> + to route the interrupts across various subsystems. It involves a three-level

s/the//

> + addressing scheme called protocol, client and signal. For example, consider an
> + entity on the Application Processor Subsystem (APSS) that wants to listen to
> + Modem's interrupts via Shared Memory Point to Point (SMP2P) interface. In such
> + a case, the client would be Modem (client-id is 2) and the signal would be
> + SMP2P (signal-id is 2). The SMP2P itself falls under the Multiprocessor (MPROC)
> + protocol (protocol-id is 0). Refer include/dt-bindings/soc/qcom/qcom,ipcc.h
> + for the list of such IDs.
> +
> + One of the duties of this interrupt controller driver is to forward the
> + interrupts to the correct entities on the APSS. The children inheriting the

Clients using the...

> + interrupt-controller would be mentioning the client-id and signal-id it's

s/would be mentioning/should specify/

> + interested in.
> +
> + On the other hand, sending an interrupt to a subsystem is done through the

"In the other direction," and add clarify subsystem by making it "remote
subsystem".

> + mailbox interface, which again requires client-id and signal-id.
> +
> +properties:
> + compatible:

It's uncertain how new vers

> + const: "qcom,ipcc"
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + interrupt-controller: true
> +
> + "#interrupt-cells":
> + const: 3
> + description:
> + The first cell is the client-id, the second cell is the signal-id and the
> + third cell is the interrupt type.
> +
> + "#mbox-cells":
> + const: 2
> + description:
> + The first cell is the client-id, and the second cell is the signal-id.
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - interrupt-controller
> + - "#interrupt-cells"
> + - "#mbox-cells"
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/soc/qcom,ipcc.h>
> +
> + ipcc_mproc: qcom,ipcc@408000 {

interrupt-controller@

Regards,
Bjorn

> + compatible = "qcom,ipcc";
> + reg = <0x408000 0x1000>;
> + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + #mbox-cells = <2>;
> + };
> +
> + smp2p-modem {
> + compatible = "qcom,smp2p";
> + interrupts-extended = <&ipcc_mproc IPCC_CLIENT_MPSS
> + IPCC_MPROC_SIGNAL_SMP2P IRQ_TYPE_EDGE_RISING>;
> + mboxes = <&ipcc_mproc IPCC_CLIENT_MPSS IPCC_MPROC_SIGNAL_SMP2P>;
> +
> + /* Other SMP2P fields */
> + };
> diff --git a/include/dt-bindings/soc/qcom,ipcc.h b/include/dt-bindings/soc/qcom,ipcc.h
> new file mode 100644
> index 000000000000..2926cdb4cb48
> --- /dev/null
> +++ b/include/dt-bindings/soc/qcom,ipcc.h
> @@ -0,0 +1,38 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef __DT_BINDINGS_QCOM_IPCC_H
> +#define __DT_BINDINGS_QCOM_IPCC_H
> +
> +/* Signal IDs for MPROC protocol */
> +#define IPCC_MPROC_SIGNAL_GLINK_QMP 0
> +#define IPCC_MPROC_SIGNAL_SMP2P 2
> +#define IPCC_MPROC_SIGNAL_PING 3
> +#define IPCC_MPROC_SIGNAL_MAX 4 /* Used by driver only */
> +
> +#define IPCC_COMPUTE_L0_SIGNAL_MAX 32 /* Used by driver only */
> +#define IPCC_COMPUTE_L1_SIGNAL_MAX 32 /* Used by driver only */
> +
> +/* Client IDs */
> +#define IPCC_CLIENT_AOP 0
> +#define IPCC_CLIENT_TZ 1
> +#define IPCC_CLIENT_MPSS 2
> +#define IPCC_CLIENT_LPASS 3
> +#define IPCC_CLIENT_SLPI 4
> +#define IPCC_CLIENT_SDC 5
> +#define IPCC_CLIENT_CDSP 6
> +#define IPCC_CLIENT_NPU 7
> +#define IPCC_CLIENT_APSS 8
> +#define IPCC_CLIENT_GPU 9
> +#define IPCC_CLIENT_CVP 10
> +#define IPCC_CLIENT_CAM 11
> +#define IPCC_CLIENT_VPU 12
> +#define IPCC_CLIENT_PCIE0 13
> +#define IPCC_CLIENT_PCIE1 14
> +#define IPCC_CLIENT_PCIE2 15
> +#define IPCC_CLIENT_SPSS 16
> +#define IPCC_CLIENT_MAX 17 /* Used by driver only */
> +
> +#endif
> --
> 2.17.1
>