[PATCH 16/37] docs: networking: convert packet_mmap.txt to ReST

From: Mauro Carvalho Chehab
Date: Thu Apr 30 2020 - 12:05:02 EST


This patch has a big diff, but most are due to whitespaces.

Yet, the conversion is similar to other files under networking:

- add SPDX header;
- add a document title;
- adjust titles and chapters, adding proper markups;
- mark lists as such;
- mark tables as such;
- mark code blocks and literals as such;
- adjust identation, whitespaces and blank lines where needed;
- add to networking/index.rst.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
---
Documentation/networking/index.rst | 1 +
Documentation/networking/packet_mmap.rst | 1084 ++++++++++++++++++++++
Documentation/networking/packet_mmap.txt | 1061 ---------------------
3 files changed, 1085 insertions(+), 1061 deletions(-)
create mode 100644 Documentation/networking/packet_mmap.rst
delete mode 100644 Documentation/networking/packet_mmap.txt

diff --git a/Documentation/networking/index.rst b/Documentation/networking/index.rst
index 028a36821b9a..8262b535a83e 100644
--- a/Documentation/networking/index.rst
+++ b/Documentation/networking/index.rst
@@ -89,6 +89,7 @@ Contents:
nf_flowtable
openvswitch
operstates
+ packet_mmap

.. only:: subproject and html

diff --git a/Documentation/networking/packet_mmap.rst b/Documentation/networking/packet_mmap.rst
new file mode 100644
index 000000000000..5f213d17652f
--- /dev/null
+++ b/Documentation/networking/packet_mmap.rst
@@ -0,0 +1,1084 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===========
+Packet MMAP
+===========
+
+Abstract
+========
+
+This file documents the mmap() facility available with the PACKET
+socket interface on 2.4/2.6/3.x kernels. This type of sockets is used for
+
+i) capture network traffic with utilities like tcpdump,
+ii) transmit network traffic, or any other that needs raw
+ access to network interface.
+
+Howto can be found at:
+
+ https://sites.google.com/site/packetmmap/
+
+Please send your comments to
+ - Ulisses Alonso Camarà <uaca@xxxxxxxxxxxxxxxxxxxxxxxx>
+ - Johann Baudy
+
+Why use PACKET_MMAP
+===================
+
+In Linux 2.4/2.6/3.x if PACKET_MMAP is not enabled, the capture process is very
+inefficient. It uses very limited buffers and requires one system call to
+capture each packet, it requires two if you want to get packet's timestamp
+(like libpcap always does).
+
+In the other hand PACKET_MMAP is very efficient. PACKET_MMAP provides a size
+configurable circular buffer mapped in user space that can be used to either
+send or receive packets. This way reading packets just needs to wait for them,
+most of the time there is no need to issue a single system call. Concerning
+transmission, multiple packets can be sent through one system call to get the
+highest bandwidth. By using a shared buffer between the kernel and the user
+also has the benefit of minimizing packet copies.
+
+It's fine to use PACKET_MMAP to improve the performance of the capture and
+transmission process, but it isn't everything. At least, if you are capturing
+at high speeds (this is relative to the cpu speed), you should check if the
+device driver of your network interface card supports some sort of interrupt
+load mitigation or (even better) if it supports NAPI, also make sure it is
+enabled. For transmission, check the MTU (Maximum Transmission Unit) used and
+supported by devices of your network. CPU IRQ pinning of your network interface
+card can also be an advantage.
+
+How to use mmap() to improve capture process
+============================================
+
+From the user standpoint, you should use the higher level libpcap library, which
+is a de facto standard, portable across nearly all operating systems
+including Win32.
+
+Packet MMAP support was integrated into libpcap around the time of version 1.3.0;
+TPACKET_V3 support was added in version 1.5.0
+
+How to use mmap() directly to improve capture process
+=====================================================
+
+From the system calls stand point, the use of PACKET_MMAP involves
+the following process::
+
+
+ [setup] socket() -------> creation of the capture socket
+ setsockopt() ---> allocation of the circular buffer (ring)
+ option: PACKET_RX_RING
+ mmap() ---------> mapping of the allocated buffer to the
+ user process
+
+ [capture] poll() ---------> to wait for incoming packets
+
+ [shutdown] close() --------> destruction of the capture socket and
+ deallocation of all associated
+ resources.
+
+
+socket creation and destruction is straight forward, and is done
+the same way with or without PACKET_MMAP::
+
+ int fd = socket(PF_PACKET, mode, htons(ETH_P_ALL));
+
+where mode is SOCK_RAW for the raw interface were link level
+information can be captured or SOCK_DGRAM for the cooked
+interface where link level information capture is not
+supported and a link level pseudo-header is provided
+by the kernel.
+
+The destruction of the socket and all associated resources
+is done by a simple call to close(fd).
+
+Similarly as without PACKET_MMAP, it is possible to use one socket
+for capture and transmission. This can be done by mapping the
+allocated RX and TX buffer ring with a single mmap() call.
+See "Mapping and use of the circular buffer (ring)".
+
+Next I will describe PACKET_MMAP settings and its constraints,
+also the mapping of the circular buffer in the user process and
+the use of this buffer.
+
+How to use mmap() directly to improve transmission process
+==========================================================
+Transmission process is similar to capture as shown below::
+
+ [setup] socket() -------> creation of the transmission socket
+ setsockopt() ---> allocation of the circular buffer (ring)
+ option: PACKET_TX_RING
+ bind() ---------> bind transmission socket with a network interface
+ mmap() ---------> mapping of the allocated buffer to the
+ user process
+
+ [transmission] poll() ---------> wait for free packets (optional)
+ send() ---------> send all packets that are set as ready in
+ the ring
+ The flag MSG_DONTWAIT can be used to return
+ before end of transfer.
+
+ [shutdown] close() --------> destruction of the transmission socket and
+ deallocation of all associated resources.
+
+Socket creation and destruction is also straight forward, and is done
+the same way as in capturing described in the previous paragraph::
+
+ int fd = socket(PF_PACKET, mode, 0);
+
+The protocol can optionally be 0 in case we only want to transmit
+via this socket, which avoids an expensive call to packet_rcv().
+In this case, you also need to bind(2) the TX_RING with sll_protocol = 0
+set. Otherwise, htons(ETH_P_ALL) or any other protocol, for example.
+
+Binding the socket to your network interface is mandatory (with zero copy) to
+know the header size of frames used in the circular buffer.
+
+As capture, each frame contains two parts::
+
+ --------------------
+ | struct tpacket_hdr | Header. It contains the status of
+ | | of this frame
+ |--------------------|
+ | data buffer |
+ . . Data that will be sent over the network interface.
+ . .
+ --------------------
+
+ bind() associates the socket to your network interface thanks to
+ sll_ifindex parameter of struct sockaddr_ll.
+
+ Initialization example::
+
+ struct sockaddr_ll my_addr;
+ struct ifreq s_ifr;
+ ...
+
+ strncpy (s_ifr.ifr_name, "eth0", sizeof(s_ifr.ifr_name));
+
+ /* get interface index of eth0 */
+ ioctl(this->socket, SIOCGIFINDEX, &s_ifr);
+
+ /* fill sockaddr_ll struct to prepare binding */
+ my_addr.sll_family = AF_PACKET;
+ my_addr.sll_protocol = htons(ETH_P_ALL);
+ my_addr.sll_ifindex = s_ifr.ifr_ifindex;
+
+ /* bind socket to eth0 */
+ bind(this->socket, (struct sockaddr *)&my_addr, sizeof(struct sockaddr_ll));
+
+ A complete tutorial is available at: https://sites.google.com/site/packetmmap/
+
+By default, the user should put data at::
+
+ frame base + TPACKET_HDRLEN - sizeof(struct sockaddr_ll)
+
+So, whatever you choose for the socket mode (SOCK_DGRAM or SOCK_RAW),
+the beginning of the user data will be at::
+
+ frame base + TPACKET_ALIGN(sizeof(struct tpacket_hdr))
+
+If you wish to put user data at a custom offset from the beginning of
+the frame (for payload alignment with SOCK_RAW mode for instance) you
+can set tp_net (with SOCK_DGRAM) or tp_mac (with SOCK_RAW). In order
+to make this work it must be enabled previously with setsockopt()
+and the PACKET_TX_HAS_OFF option.
+
+PACKET_MMAP settings
+====================
+
+To setup PACKET_MMAP from user level code is done with a call like
+
+ - Capture process::
+
+ setsockopt(fd, SOL_PACKET, PACKET_RX_RING, (void *) &req, sizeof(req))
+
+ - Transmission process::
+
+ setsockopt(fd, SOL_PACKET, PACKET_TX_RING, (void *) &req, sizeof(req))
+
+The most significant argument in the previous call is the req parameter,
+this parameter must to have the following structure::
+
+ struct tpacket_req
+ {
+ unsigned int tp_block_size; /* Minimal size of contiguous block */
+ unsigned int tp_block_nr; /* Number of blocks */
+ unsigned int tp_frame_size; /* Size of frame */
+ unsigned int tp_frame_nr; /* Total number of frames */
+ };
+
+This structure is defined in /usr/include/linux/if_packet.h and establishes a
+circular buffer (ring) of unswappable memory.
+Being mapped in the capture process allows reading the captured frames and
+related meta-information like timestamps without requiring a system call.
+
+Frames are grouped in blocks. Each block is a physically contiguous
+region of memory and holds tp_block_size/tp_frame_size frames. The total number
+of blocks is tp_block_nr. Note that tp_frame_nr is a redundant parameter because::
+
+ frames_per_block = tp_block_size/tp_frame_size
+
+indeed, packet_set_ring checks that the following condition is true::
+
+ frames_per_block * tp_block_nr == tp_frame_nr
+
+Lets see an example, with the following values::
+
+ tp_block_size= 4096
+ tp_frame_size= 2048
+ tp_block_nr = 4
+ tp_frame_nr = 8
+
+we will get the following buffer structure::
+
+ block #1 block #2
+ +---------+---------+ +---------+---------+
+ | frame 1 | frame 2 | | frame 3 | frame 4 |
+ +---------+---------+ +---------+---------+
+
+ block #3 block #4
+ +---------+---------+ +---------+---------+
+ | frame 5 | frame 6 | | frame 7 | frame 8 |
+ +---------+---------+ +---------+---------+
+
+A frame can be of any size with the only condition it can fit in a block. A block
+can only hold an integer number of frames, or in other words, a frame cannot
+be spawned across two blocks, so there are some details you have to take into
+account when choosing the frame_size. See "Mapping and use of the circular
+buffer (ring)".
+
+PACKET_MMAP setting constraints
+===============================
+
+In kernel versions prior to 2.4.26 (for the 2.4 branch) and 2.6.5 (2.6 branch),
+the PACKET_MMAP buffer could hold only 32768 frames in a 32 bit architecture or
+16384 in a 64 bit architecture. For information on these kernel versions
+see http://pusa.uv.es/~ulisses/packet_mmap/packet_mmap.pre-2.4.26_2.6.5.txt
+
+Block size limit
+----------------
+
+As stated earlier, each block is a contiguous physical region of memory. These
+memory regions are allocated with calls to the __get_free_pages() function. As
+the name indicates, this function allocates pages of memory, and the second
+argument is "order" or a power of two number of pages, that is
+(for PAGE_SIZE == 4096) order=0 ==> 4096 bytes, order=1 ==> 8192 bytes,
+order=2 ==> 16384 bytes, etc. The maximum size of a
+region allocated by __get_free_pages is determined by the MAX_ORDER macro. More
+precisely the limit can be calculated as::
+
+ PAGE_SIZE << MAX_ORDER
+
+ In a i386 architecture PAGE_SIZE is 4096 bytes
+ In a 2.4/i386 kernel MAX_ORDER is 10
+ In a 2.6/i386 kernel MAX_ORDER is 11
+
+So get_free_pages can allocate as much as 4MB or 8MB in a 2.4/2.6 kernel
+respectively, with an i386 architecture.
+
+User space programs can include /usr/include/sys/user.h and
+/usr/include/linux/mmzone.h to get PAGE_SIZE MAX_ORDER declarations.
+
+The pagesize can also be determined dynamically with the getpagesize (2)
+system call.
+
+Block number limit
+------------------
+
+To understand the constraints of PACKET_MMAP, we have to see the structure
+used to hold the pointers to each block.
+
+Currently, this structure is a dynamically allocated vector with kmalloc
+called pg_vec, its size limits the number of blocks that can be allocated::
+
+ +---+---+---+---+
+ | x | x | x | x |
+ +---+---+---+---+
+ | | | |
+ | | | v
+ | | v block #4
+ | v block #3
+ v block #2
+ block #1
+
+kmalloc allocates any number of bytes of physically contiguous memory from
+a pool of pre-determined sizes. This pool of memory is maintained by the slab
+allocator which is at the end the responsible for doing the allocation and
+hence which imposes the maximum memory that kmalloc can allocate.
+
+In a 2.4/2.6 kernel and the i386 architecture, the limit is 131072 bytes. The
+predetermined sizes that kmalloc uses can be checked in the "size-<bytes>"
+entries of /proc/slabinfo
+
+In a 32 bit architecture, pointers are 4 bytes long, so the total number of
+pointers to blocks is::
+
+ 131072/4 = 32768 blocks
+
+PACKET_MMAP buffer size calculator
+==================================
+
+Definitions:
+
+============== ================================================================
+<size-max> is the maximum size of allocable with kmalloc
+ (see /proc/slabinfo)
+<pointer size> depends on the architecture -- ``sizeof(void *)``
+<page size> depends on the architecture -- PAGE_SIZE or getpagesize (2)
+<max-order> is the value defined with MAX_ORDER
+<frame size> it's an upper bound of frame's capture size (more on this later)
+============== ================================================================
+
+from these definitions we will derive::
+
+ <block number> = <size-max>/<pointer size>
+ <block size> = <pagesize> << <max-order>
+
+so, the max buffer size is::
+
+ <block number> * <block size>
+
+and, the number of frames be::
+
+ <block number> * <block size> / <frame size>
+
+Suppose the following parameters, which apply for 2.6 kernel and an
+i386 architecture::
+
+ <size-max> = 131072 bytes
+ <pointer size> = 4 bytes
+ <pagesize> = 4096 bytes
+ <max-order> = 11
+
+and a value for <frame size> of 2048 bytes. These parameters will yield::
+
+ <block number> = 131072/4 = 32768 blocks
+ <block size> = 4096 << 11 = 8 MiB.
+
+and hence the buffer will have a 262144 MiB size. So it can hold
+262144 MiB / 2048 bytes = 134217728 frames
+
+Actually, this buffer size is not possible with an i386 architecture.
+Remember that the memory is allocated in kernel space, in the case of
+an i386 kernel's memory size is limited to 1GiB.
+
+All memory allocations are not freed until the socket is closed. The memory
+allocations are done with GFP_KERNEL priority, this basically means that
+the allocation can wait and swap other process' memory in order to allocate
+the necessary memory, so normally limits can be reached.
+
+Other constraints
+-----------------
+
+If you check the source code you will see that what I draw here as a frame
+is not only the link level frame. At the beginning of each frame there is a
+header called struct tpacket_hdr used in PACKET_MMAP to hold link level's frame
+meta information like timestamp. So what we draw here a frame it's really
+the following (from include/linux/if_packet.h)::
+
+ /*
+ Frame structure:
+
+ - Start. Frame must be aligned to TPACKET_ALIGNMENT=16
+ - struct tpacket_hdr
+ - pad to TPACKET_ALIGNMENT=16
+ - struct sockaddr_ll
+ - Gap, chosen so that packet data (Start+tp_net) aligns to
+ TPACKET_ALIGNMENT=16
+ - Start+tp_mac: [ Optional MAC header ]
+ - Start+tp_net: Packet data, aligned to TPACKET_ALIGNMENT=16.
+ - Pad to align to TPACKET_ALIGNMENT=16
+ */
+
+The following are conditions that are checked in packet_set_ring
+
+ - tp_block_size must be a multiple of PAGE_SIZE (1)
+ - tp_frame_size must be greater than TPACKET_HDRLEN (obvious)
+ - tp_frame_size must be a multiple of TPACKET_ALIGNMENT
+ - tp_frame_nr must be exactly frames_per_block*tp_block_nr
+
+Note that tp_block_size should be chosen to be a power of two or there will
+be a waste of memory.
+
+Mapping and use of the circular buffer (ring)
+---------------------------------------------
+
+The mapping of the buffer in the user process is done with the conventional
+mmap function. Even the circular buffer is compound of several physically
+discontiguous blocks of memory, they are contiguous to the user space, hence
+just one call to mmap is needed::
+
+ mmap(0, size, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
+
+If tp_frame_size is a divisor of tp_block_size frames will be
+contiguously spaced by tp_frame_size bytes. If not, each
+tp_block_size/tp_frame_size frames there will be a gap between
+the frames. This is because a frame cannot be spawn across two
+blocks.
+
+To use one socket for capture and transmission, the mapping of both the
+RX and TX buffer ring has to be done with one call to mmap::
+
+ ...
+ setsockopt(fd, SOL_PACKET, PACKET_RX_RING, &foo, sizeof(foo));
+ setsockopt(fd, SOL_PACKET, PACKET_TX_RING, &bar, sizeof(bar));
+ ...
+ rx_ring = mmap(0, size * 2, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
+ tx_ring = rx_ring + size;
+
+RX must be the first as the kernel maps the TX ring memory right
+after the RX one.
+
+At the beginning of each frame there is an status field (see
+struct tpacket_hdr). If this field is 0 means that the frame is ready
+to be used for the kernel, If not, there is a frame the user can read
+and the following flags apply:
+
+Capture process
+^^^^^^^^^^^^^^^
+
+ from include/linux/if_packet.h
+
+ #define TP_STATUS_COPY (1 << 1)
+ #define TP_STATUS_LOSING (1 << 2)
+ #define TP_STATUS_CSUMNOTREADY (1 << 3)
+ #define TP_STATUS_CSUM_VALID (1 << 7)
+
+====================== =======================================================
+TP_STATUS_COPY This flag indicates that the frame (and associated
+ meta information) has been truncated because it's
+ larger than tp_frame_size. This packet can be
+ read entirely with recvfrom().
+
+ In order to make this work it must to be
+ enabled previously with setsockopt() and
+ the PACKET_COPY_THRESH option.
+
+ The number of frames that can be buffered to
+ be read with recvfrom is limited like a normal socket.
+ See the SO_RCVBUF option in the socket (7) man page.
+
+TP_STATUS_LOSING indicates there were packet drops from last time
+ statistics where checked with getsockopt() and
+ the PACKET_STATISTICS option.
+
+TP_STATUS_CSUMNOTREADY currently it's used for outgoing IP packets which
+ its checksum will be done in hardware. So while
+ reading the packet we should not try to check the
+ checksum.
+
+TP_STATUS_CSUM_VALID This flag indicates that at least the transport
+ header checksum of the packet has been already
+ validated on the kernel side. If the flag is not set
+ then we are free to check the checksum by ourselves
+ provided that TP_STATUS_CSUMNOTREADY is also not set.
+====================== =======================================================
+
+for convenience there are also the following defines::
+
+ #define TP_STATUS_KERNEL 0
+ #define TP_STATUS_USER 1
+
+The kernel initializes all frames to TP_STATUS_KERNEL, when the kernel
+receives a packet it puts in the buffer and updates the status with
+at least the TP_STATUS_USER flag. Then the user can read the packet,
+once the packet is read the user must zero the status field, so the kernel
+can use again that frame buffer.
+
+The user can use poll (any other variant should apply too) to check if new
+packets are in the ring::
+
+ struct pollfd pfd;
+
+ pfd.fd = fd;
+ pfd.revents = 0;
+ pfd.events = POLLIN|POLLRDNORM|POLLERR;
+
+ if (status == TP_STATUS_KERNEL)
+ retval = poll(&pfd, 1, timeout);
+
+It doesn't incur in a race condition to first check the status value and
+then poll for frames.
+
+Transmission process
+^^^^^^^^^^^^^^^^^^^^
+
+Those defines are also used for transmission::
+
+ #define TP_STATUS_AVAILABLE 0 // Frame is available
+ #define TP_STATUS_SEND_REQUEST 1 // Frame will be sent on next send()
+ #define TP_STATUS_SENDING 2 // Frame is currently in transmission
+ #define TP_STATUS_WRONG_FORMAT 4 // Frame format is not correct
+
+First, the kernel initializes all frames to TP_STATUS_AVAILABLE. To send a
+packet, the user fills a data buffer of an available frame, sets tp_len to
+current data buffer size and sets its status field to TP_STATUS_SEND_REQUEST.
+This can be done on multiple frames. Once the user is ready to transmit, it
+calls send(). Then all buffers with status equal to TP_STATUS_SEND_REQUEST are
+forwarded to the network device. The kernel updates each status of sent
+frames with TP_STATUS_SENDING until the end of transfer.
+
+At the end of each transfer, buffer status returns to TP_STATUS_AVAILABLE.
+
+::
+
+ header->tp_len = in_i_size;
+ header->tp_status = TP_STATUS_SEND_REQUEST;
+ retval = send(this->socket, NULL, 0, 0);
+
+The user can also use poll() to check if a buffer is available:
+
+(status == TP_STATUS_SENDING)
+
+::
+
+ struct pollfd pfd;
+ pfd.fd = fd;
+ pfd.revents = 0;
+ pfd.events = POLLOUT;
+ retval = poll(&pfd, 1, timeout);
+
+What TPACKET versions are available and when to use them?
+=========================================================
+
+::
+
+ int val = tpacket_version;
+ setsockopt(fd, SOL_PACKET, PACKET_VERSION, &val, sizeof(val));
+ getsockopt(fd, SOL_PACKET, PACKET_VERSION, &val, sizeof(val));
+
+where 'tpacket_version' can be TPACKET_V1 (default), TPACKET_V2, TPACKET_V3.
+
+TPACKET_V1:
+ - Default if not otherwise specified by setsockopt(2)
+ - RX_RING, TX_RING available
+
+TPACKET_V1 --> TPACKET_V2:
+ - Made 64 bit clean due to unsigned long usage in TPACKET_V1
+ structures, thus this also works on 64 bit kernel with 32 bit
+ userspace and the like
+ - Timestamp resolution in nanoseconds instead of microseconds
+ - RX_RING, TX_RING available
+ - VLAN metadata information available for packets
+ (TP_STATUS_VLAN_VALID, TP_STATUS_VLAN_TPID_VALID),
+ in the tpacket2_hdr structure:
+
+ - TP_STATUS_VLAN_VALID bit being set into the tp_status field indicates
+ that the tp_vlan_tci field has valid VLAN TCI value
+ - TP_STATUS_VLAN_TPID_VALID bit being set into the tp_status field
+ indicates that the tp_vlan_tpid field has valid VLAN TPID value
+
+ - How to switch to TPACKET_V2:
+
+ 1. Replace struct tpacket_hdr by struct tpacket2_hdr
+ 2. Query header len and save
+ 3. Set protocol version to 2, set up ring as usual
+ 4. For getting the sockaddr_ll,
+ use ``(void *)hdr + TPACKET_ALIGN(hdrlen)`` instead of
+ ``(void *)hdr + TPACKET_ALIGN(sizeof(struct tpacket_hdr))``
+
+TPACKET_V2 --> TPACKET_V3:
+ - Flexible buffer implementation for RX_RING:
+ 1. Blocks can be configured with non-static frame-size
+ 2. Read/poll is at a block-level (as opposed to packet-level)
+ 3. Added poll timeout to avoid indefinite user-space wait
+ on idle links
+ 4. Added user-configurable knobs:
+
+ 4.1 block::timeout
+ 4.2 tpkt_hdr::sk_rxhash
+
+ - RX Hash data available in user space
+ - TX_RING semantics are conceptually similar to TPACKET_V2;
+ use tpacket3_hdr instead of tpacket2_hdr, and TPACKET3_HDRLEN
+ instead of TPACKET2_HDRLEN. In the current implementation,
+ the tp_next_offset field in the tpacket3_hdr MUST be set to
+ zero, indicating that the ring does not hold variable sized frames.
+ Packets with non-zero values of tp_next_offset will be dropped.
+
+AF_PACKET fanout mode
+=====================
+
+In the AF_PACKET fanout mode, packet reception can be load balanced among
+processes. This also works in combination with mmap(2) on packet sockets.
+
+Currently implemented fanout policies are:
+
+ - PACKET_FANOUT_HASH: schedule to socket by skb's packet hash
+ - PACKET_FANOUT_LB: schedule to socket by round-robin
+ - PACKET_FANOUT_CPU: schedule to socket by CPU packet arrives on
+ - PACKET_FANOUT_RND: schedule to socket by random selection
+ - PACKET_FANOUT_ROLLOVER: if one socket is full, rollover to another
+ - PACKET_FANOUT_QM: schedule to socket by skbs recorded queue_mapping
+
+Minimal example code by David S. Miller (try things like "./test eth0 hash",
+"./test eth0 lb", etc.)::
+
+ #include <stddef.h>
+ #include <stdlib.h>
+ #include <stdio.h>
+ #include <string.h>
+
+ #include <sys/types.h>
+ #include <sys/wait.h>
+ #include <sys/socket.h>
+ #include <sys/ioctl.h>
+
+ #include <unistd.h>
+
+ #include <linux/if_ether.h>
+ #include <linux/if_packet.h>
+
+ #include <net/if.h>
+
+ static const char *device_name;
+ static int fanout_type;
+ static int fanout_id;
+
+ #ifndef PACKET_FANOUT
+ # define PACKET_FANOUT 18
+ # define PACKET_FANOUT_HASH 0
+ # define PACKET_FANOUT_LB 1
+ #endif
+
+ static int setup_socket(void)
+ {
+ int err, fd = socket(AF_PACKET, SOCK_RAW, htons(ETH_P_IP));
+ struct sockaddr_ll ll;
+ struct ifreq ifr;
+ int fanout_arg;
+
+ if (fd < 0) {
+ perror("socket");
+ return EXIT_FAILURE;
+ }
+
+ memset(&ifr, 0, sizeof(ifr));
+ strcpy(ifr.ifr_name, device_name);
+ err = ioctl(fd, SIOCGIFINDEX, &ifr);
+ if (err < 0) {
+ perror("SIOCGIFINDEX");
+ return EXIT_FAILURE;
+ }
+
+ memset(&ll, 0, sizeof(ll));
+ ll.sll_family = AF_PACKET;
+ ll.sll_ifindex = ifr.ifr_ifindex;
+ err = bind(fd, (struct sockaddr *) &ll, sizeof(ll));
+ if (err < 0) {
+ perror("bind");
+ return EXIT_FAILURE;
+ }
+
+ fanout_arg = (fanout_id | (fanout_type << 16));
+ err = setsockopt(fd, SOL_PACKET, PACKET_FANOUT,
+ &fanout_arg, sizeof(fanout_arg));
+ if (err) {
+ perror("setsockopt");
+ return EXIT_FAILURE;
+ }
+
+ return fd;
+ }
+
+ static void fanout_thread(void)
+ {
+ int fd = setup_socket();
+ int limit = 10000;
+
+ if (fd < 0)
+ exit(fd);
+
+ while (limit-- > 0) {
+ char buf[1600];
+ int err;
+
+ err = read(fd, buf, sizeof(buf));
+ if (err < 0) {
+ perror("read");
+ exit(EXIT_FAILURE);
+ }
+ if ((limit % 10) == 0)
+ fprintf(stdout, "(%d) \n", getpid());
+ }
+
+ fprintf(stdout, "%d: Received 10000 packets\n", getpid());
+
+ close(fd);
+ exit(0);
+ }
+
+ int main(int argc, char **argp)
+ {
+ int fd, err;
+ int i;
+
+ if (argc != 3) {
+ fprintf(stderr, "Usage: %s INTERFACE {hash|lb}\n", argp[0]);
+ return EXIT_FAILURE;
+ }
+
+ if (!strcmp(argp[2], "hash"))
+ fanout_type = PACKET_FANOUT_HASH;
+ else if (!strcmp(argp[2], "lb"))
+ fanout_type = PACKET_FANOUT_LB;
+ else {
+ fprintf(stderr, "Unknown fanout type [%s]\n", argp[2]);
+ exit(EXIT_FAILURE);
+ }
+
+ device_name = argp[1];
+ fanout_id = getpid() & 0xffff;
+
+ for (i = 0; i < 4; i++) {
+ pid_t pid = fork();
+
+ switch (pid) {
+ case 0:
+ fanout_thread();
+
+ case -1:
+ perror("fork");
+ exit(EXIT_FAILURE);
+ }
+ }
+
+ for (i = 0; i < 4; i++) {
+ int status;
+
+ wait(&status);
+ }
+
+ return 0;
+ }
+
+AF_PACKET TPACKET_V3 example
+============================
+
+AF_PACKET's TPACKET_V3 ring buffer can be configured to use non-static frame
+sizes by doing it's own memory management. It is based on blocks where polling
+works on a per block basis instead of per ring as in TPACKET_V2 and predecessor.
+
+It is said that TPACKET_V3 brings the following benefits:
+
+ * ~15% - 20% reduction in CPU-usage
+ * ~20% increase in packet capture rate
+ * ~2x increase in packet density
+ * Port aggregation analysis
+ * Non static frame size to capture entire packet payload
+
+So it seems to be a good candidate to be used with packet fanout.
+
+Minimal example code by Daniel Borkmann based on Chetan Loke's lolpcap (compile
+it with gcc -Wall -O2 blob.c, and try things like "./a.out eth0", etc.)::
+
+ /* Written from scratch, but kernel-to-user space API usage
+ * dissected from lolpcap:
+ * Copyright 2011, Chetan Loke <loke.chetan@xxxxxxxxx>
+ * License: GPL, version 2.0
+ */
+
+ #include <stdio.h>
+ #include <stdlib.h>
+ #include <stdint.h>
+ #include <string.h>
+ #include <assert.h>
+ #include <net/if.h>
+ #include <arpa/inet.h>
+ #include <netdb.h>
+ #include <poll.h>
+ #include <unistd.h>
+ #include <signal.h>
+ #include <inttypes.h>
+ #include <sys/socket.h>
+ #include <sys/mman.h>
+ #include <linux/if_packet.h>
+ #include <linux/if_ether.h>
+ #include <linux/ip.h>
+
+ #ifndef likely
+ # define likely(x) __builtin_expect(!!(x), 1)
+ #endif
+ #ifndef unlikely
+ # define unlikely(x) __builtin_expect(!!(x), 0)
+ #endif
+
+ struct block_desc {
+ uint32_t version;
+ uint32_t offset_to_priv;
+ struct tpacket_hdr_v1 h1;
+ };
+
+ struct ring {
+ struct iovec *rd;
+ uint8_t *map;
+ struct tpacket_req3 req;
+ };
+
+ static unsigned long packets_total = 0, bytes_total = 0;
+ static sig_atomic_t sigint = 0;
+
+ static void sighandler(int num)
+ {
+ sigint = 1;
+ }
+
+ static int setup_socket(struct ring *ring, char *netdev)
+ {
+ int err, i, fd, v = TPACKET_V3;
+ struct sockaddr_ll ll;
+ unsigned int blocksiz = 1 << 22, framesiz = 1 << 11;
+ unsigned int blocknum = 64;
+
+ fd = socket(AF_PACKET, SOCK_RAW, htons(ETH_P_ALL));
+ if (fd < 0) {
+ perror("socket");
+ exit(1);
+ }
+
+ err = setsockopt(fd, SOL_PACKET, PACKET_VERSION, &v, sizeof(v));
+ if (err < 0) {
+ perror("setsockopt");
+ exit(1);
+ }
+
+ memset(&ring->req, 0, sizeof(ring->req));
+ ring->req.tp_block_size = blocksiz;
+ ring->req.tp_frame_size = framesiz;
+ ring->req.tp_block_nr = blocknum;
+ ring->req.tp_frame_nr = (blocksiz * blocknum) / framesiz;
+ ring->req.tp_retire_blk_tov = 60;
+ ring->req.tp_feature_req_word = TP_FT_REQ_FILL_RXHASH;
+
+ err = setsockopt(fd, SOL_PACKET, PACKET_RX_RING, &ring->req,
+ sizeof(ring->req));
+ if (err < 0) {
+ perror("setsockopt");
+ exit(1);
+ }
+
+ ring->map = mmap(NULL, ring->req.tp_block_size * ring->req.tp_block_nr,
+ PROT_READ | PROT_WRITE, MAP_SHARED | MAP_LOCKED, fd, 0);
+ if (ring->map == MAP_FAILED) {
+ perror("mmap");
+ exit(1);
+ }
+
+ ring->rd = malloc(ring->req.tp_block_nr * sizeof(*ring->rd));
+ assert(ring->rd);
+ for (i = 0; i < ring->req.tp_block_nr; ++i) {
+ ring->rd[i].iov_base = ring->map + (i * ring->req.tp_block_size);
+ ring->rd[i].iov_len = ring->req.tp_block_size;
+ }
+
+ memset(&ll, 0, sizeof(ll));
+ ll.sll_family = PF_PACKET;
+ ll.sll_protocol = htons(ETH_P_ALL);
+ ll.sll_ifindex = if_nametoindex(netdev);
+ ll.sll_hatype = 0;
+ ll.sll_pkttype = 0;
+ ll.sll_halen = 0;
+
+ err = bind(fd, (struct sockaddr *) &ll, sizeof(ll));
+ if (err < 0) {
+ perror("bind");
+ exit(1);
+ }
+
+ return fd;
+ }
+
+ static void display(struct tpacket3_hdr *ppd)
+ {
+ struct ethhdr *eth = (struct ethhdr *) ((uint8_t *) ppd + ppd->tp_mac);
+ struct iphdr *ip = (struct iphdr *) ((uint8_t *) eth + ETH_HLEN);
+
+ if (eth->h_proto == htons(ETH_P_IP)) {
+ struct sockaddr_in ss, sd;
+ char sbuff[NI_MAXHOST], dbuff[NI_MAXHOST];
+
+ memset(&ss, 0, sizeof(ss));
+ ss.sin_family = PF_INET;
+ ss.sin_addr.s_addr = ip->saddr;
+ getnameinfo((struct sockaddr *) &ss, sizeof(ss),
+ sbuff, sizeof(sbuff), NULL, 0, NI_NUMERICHOST);
+
+ memset(&sd, 0, sizeof(sd));
+ sd.sin_family = PF_INET;
+ sd.sin_addr.s_addr = ip->daddr;
+ getnameinfo((struct sockaddr *) &sd, sizeof(sd),
+ dbuff, sizeof(dbuff), NULL, 0, NI_NUMERICHOST);
+
+ printf("%s -> %s, ", sbuff, dbuff);
+ }
+
+ printf("rxhash: 0x%x\n", ppd->hv1.tp_rxhash);
+ }
+
+ static void walk_block(struct block_desc *pbd, const int block_num)
+ {
+ int num_pkts = pbd->h1.num_pkts, i;
+ unsigned long bytes = 0;
+ struct tpacket3_hdr *ppd;
+
+ ppd = (struct tpacket3_hdr *) ((uint8_t *) pbd +
+ pbd->h1.offset_to_first_pkt);
+ for (i = 0; i < num_pkts; ++i) {
+ bytes += ppd->tp_snaplen;
+ display(ppd);
+
+ ppd = (struct tpacket3_hdr *) ((uint8_t *) ppd +
+ ppd->tp_next_offset);
+ }
+
+ packets_total += num_pkts;
+ bytes_total += bytes;
+ }
+
+ static void flush_block(struct block_desc *pbd)
+ {
+ pbd->h1.block_status = TP_STATUS_KERNEL;
+ }
+
+ static void teardown_socket(struct ring *ring, int fd)
+ {
+ munmap(ring->map, ring->req.tp_block_size * ring->req.tp_block_nr);
+ free(ring->rd);
+ close(fd);
+ }
+
+ int main(int argc, char **argp)
+ {
+ int fd, err;
+ socklen_t len;
+ struct ring ring;
+ struct pollfd pfd;
+ unsigned int block_num = 0, blocks = 64;
+ struct block_desc *pbd;
+ struct tpacket_stats_v3 stats;
+
+ if (argc != 2) {
+ fprintf(stderr, "Usage: %s INTERFACE\n", argp[0]);
+ return EXIT_FAILURE;
+ }
+
+ signal(SIGINT, sighandler);
+
+ memset(&ring, 0, sizeof(ring));
+ fd = setup_socket(&ring, argp[argc - 1]);
+ assert(fd > 0);
+
+ memset(&pfd, 0, sizeof(pfd));
+ pfd.fd = fd;
+ pfd.events = POLLIN | POLLERR;
+ pfd.revents = 0;
+
+ while (likely(!sigint)) {
+ pbd = (struct block_desc *) ring.rd[block_num].iov_base;
+
+ if ((pbd->h1.block_status & TP_STATUS_USER) == 0) {
+ poll(&pfd, 1, -1);
+ continue;
+ }
+
+ walk_block(pbd, block_num);
+ flush_block(pbd);
+ block_num = (block_num + 1) % blocks;
+ }
+
+ len = sizeof(stats);
+ err = getsockopt(fd, SOL_PACKET, PACKET_STATISTICS, &stats, &len);
+ if (err < 0) {
+ perror("getsockopt");
+ exit(1);
+ }
+
+ fflush(stdout);
+ printf("\nReceived %u packets, %lu bytes, %u dropped, freeze_q_cnt: %u\n",
+ stats.tp_packets, bytes_total, stats.tp_drops,
+ stats.tp_freeze_q_cnt);
+
+ teardown_socket(&ring, fd);
+ return 0;
+ }
+
+PACKET_QDISC_BYPASS
+===================
+
+If there is a requirement to load the network with many packets in a similar
+fashion as pktgen does, you might set the following option after socket
+creation::
+
+ int one = 1;
+ setsockopt(fd, SOL_PACKET, PACKET_QDISC_BYPASS, &one, sizeof(one));
+
+This has the side-effect, that packets sent through PF_PACKET will bypass the
+kernel's qdisc layer and are forcedly pushed to the driver directly. Meaning,
+packet are not buffered, tc disciplines are ignored, increased loss can occur
+and such packets are also not visible to other PF_PACKET sockets anymore. So,
+you have been warned; generally, this can be useful for stress testing various
+components of a system.
+
+On default, PACKET_QDISC_BYPASS is disabled and needs to be explicitly enabled
+on PF_PACKET sockets.
+
+PACKET_TIMESTAMP
+================
+
+The PACKET_TIMESTAMP setting determines the source of the timestamp in
+the packet meta information for mmap(2)ed RX_RING and TX_RINGs. If your
+NIC is capable of timestamping packets in hardware, you can request those
+hardware timestamps to be used. Note: you may need to enable the generation
+of hardware timestamps with SIOCSHWTSTAMP (see related information from
+Documentation/networking/timestamping.txt).
+
+PACKET_TIMESTAMP accepts the same integer bit field as SO_TIMESTAMPING::
+
+ int req = SOF_TIMESTAMPING_RAW_HARDWARE;
+ setsockopt(fd, SOL_PACKET, PACKET_TIMESTAMP, (void *) &req, sizeof(req))
+
+For the mmap(2)ed ring buffers, such timestamps are stored in the
+``tpacket{,2,3}_hdr`` structure's tp_sec and ``tp_{n,u}sec`` members.
+To determine what kind of timestamp has been reported, the tp_status field
+is binary or'ed with the following possible bits ...
+
+::
+
+ TP_STATUS_TS_RAW_HARDWARE
+ TP_STATUS_TS_SOFTWARE
+
+... that are equivalent to its ``SOF_TIMESTAMPING_*`` counterparts. For the
+RX_RING, if neither is set (i.e. PACKET_TIMESTAMP is not set), then a
+software fallback was invoked *within* PF_PACKET's processing code (less
+precise).
+
+Getting timestamps for the TX_RING works as follows: i) fill the ring frames,
+ii) call sendto() e.g. in blocking mode, iii) wait for status of relevant
+frames to be updated resp. the frame handed over to the application, iv) walk
+through the frames to pick up the individual hw/sw timestamps.
+
+Only (!) if transmit timestamping is enabled, then these bits are combined
+with binary | with TP_STATUS_AVAILABLE, so you must check for that in your
+application (e.g. !(tp_status & (TP_STATUS_SEND_REQUEST | TP_STATUS_SENDING))
+in a first step to see if the frame belongs to the application, and then
+one can extract the type of timestamp in a second step from tp_status)!
+
+If you don't care about them, thus having it disabled, checking for
+TP_STATUS_AVAILABLE resp. TP_STATUS_WRONG_FORMAT is sufficient. If in the
+TX_RING part only TP_STATUS_AVAILABLE is set, then the tp_sec and tp_{n,u}sec
+members do not contain a valid value. For TX_RINGs, by default no timestamp
+is generated!
+
+See include/linux/net_tstamp.h and Documentation/networking/timestamping.txt
+for more information on hardware timestamps.
+
+Miscellaneous bits
+==================
+
+- Packet sockets work well together with Linux socket filters, thus you also
+ might want to have a look at Documentation/networking/filter.txt
+
+THANKS
+======
+
+ Jesse Brandeburg, for fixing my grammathical/spelling errors
diff --git a/Documentation/networking/packet_mmap.txt b/Documentation/networking/packet_mmap.txt
deleted file mode 100644
index 494614573c67..000000000000
--- a/Documentation/networking/packet_mmap.txt
+++ /dev/null
@@ -1,1061 +0,0 @@
---------------------------------------------------------------------------------
-+ ABSTRACT
---------------------------------------------------------------------------------
-
-This file documents the mmap() facility available with the PACKET
-socket interface on 2.4/2.6/3.x kernels. This type of sockets is used for
-i) capture network traffic with utilities like tcpdump, ii) transmit network
-traffic, or any other that needs raw access to network interface.
-
-Howto can be found at:
- https://sites.google.com/site/packetmmap/
-
-Please send your comments to
- Ulisses Alonso Camarà <uaca@xxxxxxxxxxxxxxxxxxxxxxxx>
- Johann Baudy
-
--------------------------------------------------------------------------------
-+ Why use PACKET_MMAP
---------------------------------------------------------------------------------
-
-In Linux 2.4/2.6/3.x if PACKET_MMAP is not enabled, the capture process is very
-inefficient. It uses very limited buffers and requires one system call to
-capture each packet, it requires two if you want to get packet's timestamp
-(like libpcap always does).
-
-In the other hand PACKET_MMAP is very efficient. PACKET_MMAP provides a size
-configurable circular buffer mapped in user space that can be used to either
-send or receive packets. This way reading packets just needs to wait for them,
-most of the time there is no need to issue a single system call. Concerning
-transmission, multiple packets can be sent through one system call to get the
-highest bandwidth. By using a shared buffer between the kernel and the user
-also has the benefit of minimizing packet copies.
-
-It's fine to use PACKET_MMAP to improve the performance of the capture and
-transmission process, but it isn't everything. At least, if you are capturing
-at high speeds (this is relative to the cpu speed), you should check if the
-device driver of your network interface card supports some sort of interrupt
-load mitigation or (even better) if it supports NAPI, also make sure it is
-enabled. For transmission, check the MTU (Maximum Transmission Unit) used and
-supported by devices of your network. CPU IRQ pinning of your network interface
-card can also be an advantage.
-
---------------------------------------------------------------------------------
-+ How to use mmap() to improve capture process
---------------------------------------------------------------------------------
-
-From the user standpoint, you should use the higher level libpcap library, which
-is a de facto standard, portable across nearly all operating systems
-including Win32.
-
-Packet MMAP support was integrated into libpcap around the time of version 1.3.0;
-TPACKET_V3 support was added in version 1.5.0
-
---------------------------------------------------------------------------------
-+ How to use mmap() directly to improve capture process
---------------------------------------------------------------------------------
-
-From the system calls stand point, the use of PACKET_MMAP involves
-the following process:
-
-
-[setup] socket() -------> creation of the capture socket
- setsockopt() ---> allocation of the circular buffer (ring)
- option: PACKET_RX_RING
- mmap() ---------> mapping of the allocated buffer to the
- user process
-
-[capture] poll() ---------> to wait for incoming packets
-
-[shutdown] close() --------> destruction of the capture socket and
- deallocation of all associated
- resources.
-
-
-socket creation and destruction is straight forward, and is done
-the same way with or without PACKET_MMAP:
-
- int fd = socket(PF_PACKET, mode, htons(ETH_P_ALL));
-
-where mode is SOCK_RAW for the raw interface were link level
-information can be captured or SOCK_DGRAM for the cooked
-interface where link level information capture is not
-supported and a link level pseudo-header is provided
-by the kernel.
-
-The destruction of the socket and all associated resources
-is done by a simple call to close(fd).
-
-Similarly as without PACKET_MMAP, it is possible to use one socket
-for capture and transmission. This can be done by mapping the
-allocated RX and TX buffer ring with a single mmap() call.
-See "Mapping and use of the circular buffer (ring)".
-
-Next I will describe PACKET_MMAP settings and its constraints,
-also the mapping of the circular buffer in the user process and
-the use of this buffer.
-
---------------------------------------------------------------------------------
-+ How to use mmap() directly to improve transmission process
---------------------------------------------------------------------------------
-Transmission process is similar to capture as shown below.
-
-[setup] socket() -------> creation of the transmission socket
- setsockopt() ---> allocation of the circular buffer (ring)
- option: PACKET_TX_RING
- bind() ---------> bind transmission socket with a network interface
- mmap() ---------> mapping of the allocated buffer to the
- user process
-
-[transmission] poll() ---------> wait for free packets (optional)
- send() ---------> send all packets that are set as ready in
- the ring
- The flag MSG_DONTWAIT can be used to return
- before end of transfer.
-
-[shutdown] close() --------> destruction of the transmission socket and
- deallocation of all associated resources.
-
-Socket creation and destruction is also straight forward, and is done
-the same way as in capturing described in the previous paragraph:
-
- int fd = socket(PF_PACKET, mode, 0);
-
-The protocol can optionally be 0 in case we only want to transmit
-via this socket, which avoids an expensive call to packet_rcv().
-In this case, you also need to bind(2) the TX_RING with sll_protocol = 0
-set. Otherwise, htons(ETH_P_ALL) or any other protocol, for example.
-
-Binding the socket to your network interface is mandatory (with zero copy) to
-know the header size of frames used in the circular buffer.
-
-As capture, each frame contains two parts:
-
- --------------------
-| struct tpacket_hdr | Header. It contains the status of
-| | of this frame
-|--------------------|
-| data buffer |
-. . Data that will be sent over the network interface.
-. .
- --------------------
-
- bind() associates the socket to your network interface thanks to
- sll_ifindex parameter of struct sockaddr_ll.
-
- Initialization example:
-
- struct sockaddr_ll my_addr;
- struct ifreq s_ifr;
- ...
-
- strncpy (s_ifr.ifr_name, "eth0", sizeof(s_ifr.ifr_name));
-
- /* get interface index of eth0 */
- ioctl(this->socket, SIOCGIFINDEX, &s_ifr);
-
- /* fill sockaddr_ll struct to prepare binding */
- my_addr.sll_family = AF_PACKET;
- my_addr.sll_protocol = htons(ETH_P_ALL);
- my_addr.sll_ifindex = s_ifr.ifr_ifindex;
-
- /* bind socket to eth0 */
- bind(this->socket, (struct sockaddr *)&my_addr, sizeof(struct sockaddr_ll));
-
- A complete tutorial is available at: https://sites.google.com/site/packetmmap/
-
-By default, the user should put data at :
- frame base + TPACKET_HDRLEN - sizeof(struct sockaddr_ll)
-
-So, whatever you choose for the socket mode (SOCK_DGRAM or SOCK_RAW),
-the beginning of the user data will be at :
- frame base + TPACKET_ALIGN(sizeof(struct tpacket_hdr))
-
-If you wish to put user data at a custom offset from the beginning of
-the frame (for payload alignment with SOCK_RAW mode for instance) you
-can set tp_net (with SOCK_DGRAM) or tp_mac (with SOCK_RAW). In order
-to make this work it must be enabled previously with setsockopt()
-and the PACKET_TX_HAS_OFF option.
-
---------------------------------------------------------------------------------
-+ PACKET_MMAP settings
---------------------------------------------------------------------------------
-
-To setup PACKET_MMAP from user level code is done with a call like
-
- - Capture process
- setsockopt(fd, SOL_PACKET, PACKET_RX_RING, (void *) &req, sizeof(req))
- - Transmission process
- setsockopt(fd, SOL_PACKET, PACKET_TX_RING, (void *) &req, sizeof(req))
-
-The most significant argument in the previous call is the req parameter,
-this parameter must to have the following structure:
-
- struct tpacket_req
- {
- unsigned int tp_block_size; /* Minimal size of contiguous block */
- unsigned int tp_block_nr; /* Number of blocks */
- unsigned int tp_frame_size; /* Size of frame */
- unsigned int tp_frame_nr; /* Total number of frames */
- };
-
-This structure is defined in /usr/include/linux/if_packet.h and establishes a
-circular buffer (ring) of unswappable memory.
-Being mapped in the capture process allows reading the captured frames and
-related meta-information like timestamps without requiring a system call.
-
-Frames are grouped in blocks. Each block is a physically contiguous
-region of memory and holds tp_block_size/tp_frame_size frames. The total number
-of blocks is tp_block_nr. Note that tp_frame_nr is a redundant parameter because
-
- frames_per_block = tp_block_size/tp_frame_size
-
-indeed, packet_set_ring checks that the following condition is true
-
- frames_per_block * tp_block_nr == tp_frame_nr
-
-Lets see an example, with the following values:
-
- tp_block_size= 4096
- tp_frame_size= 2048
- tp_block_nr = 4
- tp_frame_nr = 8
-
-we will get the following buffer structure:
-
- block #1 block #2
-+---------+---------+ +---------+---------+
-| frame 1 | frame 2 | | frame 3 | frame 4 |
-+---------+---------+ +---------+---------+
-
- block #3 block #4
-+---------+---------+ +---------+---------+
-| frame 5 | frame 6 | | frame 7 | frame 8 |
-+---------+---------+ +---------+---------+
-
-A frame can be of any size with the only condition it can fit in a block. A block
-can only hold an integer number of frames, or in other words, a frame cannot
-be spawned across two blocks, so there are some details you have to take into
-account when choosing the frame_size. See "Mapping and use of the circular
-buffer (ring)".
-
---------------------------------------------------------------------------------
-+ PACKET_MMAP setting constraints
---------------------------------------------------------------------------------
-
-In kernel versions prior to 2.4.26 (for the 2.4 branch) and 2.6.5 (2.6 branch),
-the PACKET_MMAP buffer could hold only 32768 frames in a 32 bit architecture or
-16384 in a 64 bit architecture. For information on these kernel versions
-see http://pusa.uv.es/~ulisses/packet_mmap/packet_mmap.pre-2.4.26_2.6.5.txt
-
- Block size limit
-------------------
-
-As stated earlier, each block is a contiguous physical region of memory. These
-memory regions are allocated with calls to the __get_free_pages() function. As
-the name indicates, this function allocates pages of memory, and the second
-argument is "order" or a power of two number of pages, that is
-(for PAGE_SIZE == 4096) order=0 ==> 4096 bytes, order=1 ==> 8192 bytes,
-order=2 ==> 16384 bytes, etc. The maximum size of a
-region allocated by __get_free_pages is determined by the MAX_ORDER macro. More
-precisely the limit can be calculated as:
-
- PAGE_SIZE << MAX_ORDER
-
- In a i386 architecture PAGE_SIZE is 4096 bytes
- In a 2.4/i386 kernel MAX_ORDER is 10
- In a 2.6/i386 kernel MAX_ORDER is 11
-
-So get_free_pages can allocate as much as 4MB or 8MB in a 2.4/2.6 kernel
-respectively, with an i386 architecture.
-
-User space programs can include /usr/include/sys/user.h and
-/usr/include/linux/mmzone.h to get PAGE_SIZE MAX_ORDER declarations.
-
-The pagesize can also be determined dynamically with the getpagesize (2)
-system call.
-
- Block number limit
---------------------
-
-To understand the constraints of PACKET_MMAP, we have to see the structure
-used to hold the pointers to each block.
-
-Currently, this structure is a dynamically allocated vector with kmalloc
-called pg_vec, its size limits the number of blocks that can be allocated.
-
- +---+---+---+---+
- | x | x | x | x |
- +---+---+---+---+
- | | | |
- | | | v
- | | v block #4
- | v block #3
- v block #2
- block #1
-
-kmalloc allocates any number of bytes of physically contiguous memory from
-a pool of pre-determined sizes. This pool of memory is maintained by the slab
-allocator which is at the end the responsible for doing the allocation and
-hence which imposes the maximum memory that kmalloc can allocate.
-
-In a 2.4/2.6 kernel and the i386 architecture, the limit is 131072 bytes. The
-predetermined sizes that kmalloc uses can be checked in the "size-<bytes>"
-entries of /proc/slabinfo
-
-In a 32 bit architecture, pointers are 4 bytes long, so the total number of
-pointers to blocks is
-
- 131072/4 = 32768 blocks
-
- PACKET_MMAP buffer size calculator
-------------------------------------
-
-Definitions:
-
-<size-max> : is the maximum size of allocable with kmalloc (see /proc/slabinfo)
-<pointer size>: depends on the architecture -- sizeof(void *)
-<page size> : depends on the architecture -- PAGE_SIZE or getpagesize (2)
-<max-order> : is the value defined with MAX_ORDER
-<frame size> : it's an upper bound of frame's capture size (more on this later)
-
-from these definitions we will derive
-
- <block number> = <size-max>/<pointer size>
- <block size> = <pagesize> << <max-order>
-
-so, the max buffer size is
-
- <block number> * <block size>
-
-and, the number of frames be
-
- <block number> * <block size> / <frame size>
-
-Suppose the following parameters, which apply for 2.6 kernel and an
-i386 architecture:
-
- <size-max> = 131072 bytes
- <pointer size> = 4 bytes
- <pagesize> = 4096 bytes
- <max-order> = 11
-
-and a value for <frame size> of 2048 bytes. These parameters will yield
-
- <block number> = 131072/4 = 32768 blocks
- <block size> = 4096 << 11 = 8 MiB.
-
-and hence the buffer will have a 262144 MiB size. So it can hold
-262144 MiB / 2048 bytes = 134217728 frames
-
-Actually, this buffer size is not possible with an i386 architecture.
-Remember that the memory is allocated in kernel space, in the case of
-an i386 kernel's memory size is limited to 1GiB.
-
-All memory allocations are not freed until the socket is closed. The memory
-allocations are done with GFP_KERNEL priority, this basically means that
-the allocation can wait and swap other process' memory in order to allocate
-the necessary memory, so normally limits can be reached.
-
- Other constraints
--------------------
-
-If you check the source code you will see that what I draw here as a frame
-is not only the link level frame. At the beginning of each frame there is a
-header called struct tpacket_hdr used in PACKET_MMAP to hold link level's frame
-meta information like timestamp. So what we draw here a frame it's really
-the following (from include/linux/if_packet.h):
-
-/*
- Frame structure:
-
- - Start. Frame must be aligned to TPACKET_ALIGNMENT=16
- - struct tpacket_hdr
- - pad to TPACKET_ALIGNMENT=16
- - struct sockaddr_ll
- - Gap, chosen so that packet data (Start+tp_net) aligns to
- TPACKET_ALIGNMENT=16
- - Start+tp_mac: [ Optional MAC header ]
- - Start+tp_net: Packet data, aligned to TPACKET_ALIGNMENT=16.
- - Pad to align to TPACKET_ALIGNMENT=16
- */
-
- The following are conditions that are checked in packet_set_ring
-
- tp_block_size must be a multiple of PAGE_SIZE (1)
- tp_frame_size must be greater than TPACKET_HDRLEN (obvious)
- tp_frame_size must be a multiple of TPACKET_ALIGNMENT
- tp_frame_nr must be exactly frames_per_block*tp_block_nr
-
-Note that tp_block_size should be chosen to be a power of two or there will
-be a waste of memory.
-
---------------------------------------------------------------------------------
-+ Mapping and use of the circular buffer (ring)
---------------------------------------------------------------------------------
-
-The mapping of the buffer in the user process is done with the conventional
-mmap function. Even the circular buffer is compound of several physically
-discontiguous blocks of memory, they are contiguous to the user space, hence
-just one call to mmap is needed:
-
- mmap(0, size, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
-
-If tp_frame_size is a divisor of tp_block_size frames will be
-contiguously spaced by tp_frame_size bytes. If not, each
-tp_block_size/tp_frame_size frames there will be a gap between
-the frames. This is because a frame cannot be spawn across two
-blocks.
-
-To use one socket for capture and transmission, the mapping of both the
-RX and TX buffer ring has to be done with one call to mmap:
-
- ...
- setsockopt(fd, SOL_PACKET, PACKET_RX_RING, &foo, sizeof(foo));
- setsockopt(fd, SOL_PACKET, PACKET_TX_RING, &bar, sizeof(bar));
- ...
- rx_ring = mmap(0, size * 2, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
- tx_ring = rx_ring + size;
-
-RX must be the first as the kernel maps the TX ring memory right
-after the RX one.
-
-At the beginning of each frame there is an status field (see
-struct tpacket_hdr). If this field is 0 means that the frame is ready
-to be used for the kernel, If not, there is a frame the user can read
-and the following flags apply:
-
-+++ Capture process:
- from include/linux/if_packet.h
-
- #define TP_STATUS_COPY (1 << 1)
- #define TP_STATUS_LOSING (1 << 2)
- #define TP_STATUS_CSUMNOTREADY (1 << 3)
- #define TP_STATUS_CSUM_VALID (1 << 7)
-
-TP_STATUS_COPY : This flag indicates that the frame (and associated
- meta information) has been truncated because it's
- larger than tp_frame_size. This packet can be
- read entirely with recvfrom().
-
- In order to make this work it must to be
- enabled previously with setsockopt() and
- the PACKET_COPY_THRESH option.
-
- The number of frames that can be buffered to
- be read with recvfrom is limited like a normal socket.
- See the SO_RCVBUF option in the socket (7) man page.
-
-TP_STATUS_LOSING : indicates there were packet drops from last time
- statistics where checked with getsockopt() and
- the PACKET_STATISTICS option.
-
-TP_STATUS_CSUMNOTREADY: currently it's used for outgoing IP packets which
- its checksum will be done in hardware. So while
- reading the packet we should not try to check the
- checksum.
-
-TP_STATUS_CSUM_VALID : This flag indicates that at least the transport
- header checksum of the packet has been already
- validated on the kernel side. If the flag is not set
- then we are free to check the checksum by ourselves
- provided that TP_STATUS_CSUMNOTREADY is also not set.
-
-for convenience there are also the following defines:
-
- #define TP_STATUS_KERNEL 0
- #define TP_STATUS_USER 1
-
-The kernel initializes all frames to TP_STATUS_KERNEL, when the kernel
-receives a packet it puts in the buffer and updates the status with
-at least the TP_STATUS_USER flag. Then the user can read the packet,
-once the packet is read the user must zero the status field, so the kernel
-can use again that frame buffer.
-
-The user can use poll (any other variant should apply too) to check if new
-packets are in the ring:
-
- struct pollfd pfd;
-
- pfd.fd = fd;
- pfd.revents = 0;
- pfd.events = POLLIN|POLLRDNORM|POLLERR;
-
- if (status == TP_STATUS_KERNEL)
- retval = poll(&pfd, 1, timeout);
-
-It doesn't incur in a race condition to first check the status value and
-then poll for frames.
-
-++ Transmission process
-Those defines are also used for transmission:
-
- #define TP_STATUS_AVAILABLE 0 // Frame is available
- #define TP_STATUS_SEND_REQUEST 1 // Frame will be sent on next send()
- #define TP_STATUS_SENDING 2 // Frame is currently in transmission
- #define TP_STATUS_WRONG_FORMAT 4 // Frame format is not correct
-
-First, the kernel initializes all frames to TP_STATUS_AVAILABLE. To send a
-packet, the user fills a data buffer of an available frame, sets tp_len to
-current data buffer size and sets its status field to TP_STATUS_SEND_REQUEST.
-This can be done on multiple frames. Once the user is ready to transmit, it
-calls send(). Then all buffers with status equal to TP_STATUS_SEND_REQUEST are
-forwarded to the network device. The kernel updates each status of sent
-frames with TP_STATUS_SENDING until the end of transfer.
-At the end of each transfer, buffer status returns to TP_STATUS_AVAILABLE.
-
- header->tp_len = in_i_size;
- header->tp_status = TP_STATUS_SEND_REQUEST;
- retval = send(this->socket, NULL, 0, 0);
-
-The user can also use poll() to check if a buffer is available:
-(status == TP_STATUS_SENDING)
-
- struct pollfd pfd;
- pfd.fd = fd;
- pfd.revents = 0;
- pfd.events = POLLOUT;
- retval = poll(&pfd, 1, timeout);
-
--------------------------------------------------------------------------------
-+ What TPACKET versions are available and when to use them?
--------------------------------------------------------------------------------
-
- int val = tpacket_version;
- setsockopt(fd, SOL_PACKET, PACKET_VERSION, &val, sizeof(val));
- getsockopt(fd, SOL_PACKET, PACKET_VERSION, &val, sizeof(val));
-
-where 'tpacket_version' can be TPACKET_V1 (default), TPACKET_V2, TPACKET_V3.
-
-TPACKET_V1:
- - Default if not otherwise specified by setsockopt(2)
- - RX_RING, TX_RING available
-
-TPACKET_V1 --> TPACKET_V2:
- - Made 64 bit clean due to unsigned long usage in TPACKET_V1
- structures, thus this also works on 64 bit kernel with 32 bit
- userspace and the like
- - Timestamp resolution in nanoseconds instead of microseconds
- - RX_RING, TX_RING available
- - VLAN metadata information available for packets
- (TP_STATUS_VLAN_VALID, TP_STATUS_VLAN_TPID_VALID),
- in the tpacket2_hdr structure:
- - TP_STATUS_VLAN_VALID bit being set into the tp_status field indicates
- that the tp_vlan_tci field has valid VLAN TCI value
- - TP_STATUS_VLAN_TPID_VALID bit being set into the tp_status field
- indicates that the tp_vlan_tpid field has valid VLAN TPID value
- - How to switch to TPACKET_V2:
- 1. Replace struct tpacket_hdr by struct tpacket2_hdr
- 2. Query header len and save
- 3. Set protocol version to 2, set up ring as usual
- 4. For getting the sockaddr_ll,
- use (void *)hdr + TPACKET_ALIGN(hdrlen) instead of
- (void *)hdr + TPACKET_ALIGN(sizeof(struct tpacket_hdr))
-
-TPACKET_V2 --> TPACKET_V3:
- - Flexible buffer implementation for RX_RING:
- 1. Blocks can be configured with non-static frame-size
- 2. Read/poll is at a block-level (as opposed to packet-level)
- 3. Added poll timeout to avoid indefinite user-space wait
- on idle links
- 4. Added user-configurable knobs:
- 4.1 block::timeout
- 4.2 tpkt_hdr::sk_rxhash
- - RX Hash data available in user space
- - TX_RING semantics are conceptually similar to TPACKET_V2;
- use tpacket3_hdr instead of tpacket2_hdr, and TPACKET3_HDRLEN
- instead of TPACKET2_HDRLEN. In the current implementation,
- the tp_next_offset field in the tpacket3_hdr MUST be set to
- zero, indicating that the ring does not hold variable sized frames.
- Packets with non-zero values of tp_next_offset will be dropped.
-
--------------------------------------------------------------------------------
-+ AF_PACKET fanout mode
--------------------------------------------------------------------------------
-
-In the AF_PACKET fanout mode, packet reception can be load balanced among
-processes. This also works in combination with mmap(2) on packet sockets.
-
-Currently implemented fanout policies are:
-
- - PACKET_FANOUT_HASH: schedule to socket by skb's packet hash
- - PACKET_FANOUT_LB: schedule to socket by round-robin
- - PACKET_FANOUT_CPU: schedule to socket by CPU packet arrives on
- - PACKET_FANOUT_RND: schedule to socket by random selection
- - PACKET_FANOUT_ROLLOVER: if one socket is full, rollover to another
- - PACKET_FANOUT_QM: schedule to socket by skbs recorded queue_mapping
-
-Minimal example code by David S. Miller (try things like "./test eth0 hash",
-"./test eth0 lb", etc.):
-
-#include <stddef.h>
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-
-#include <sys/types.h>
-#include <sys/wait.h>
-#include <sys/socket.h>
-#include <sys/ioctl.h>
-
-#include <unistd.h>
-
-#include <linux/if_ether.h>
-#include <linux/if_packet.h>
-
-#include <net/if.h>
-
-static const char *device_name;
-static int fanout_type;
-static int fanout_id;
-
-#ifndef PACKET_FANOUT
-# define PACKET_FANOUT 18
-# define PACKET_FANOUT_HASH 0
-# define PACKET_FANOUT_LB 1
-#endif
-
-static int setup_socket(void)
-{
- int err, fd = socket(AF_PACKET, SOCK_RAW, htons(ETH_P_IP));
- struct sockaddr_ll ll;
- struct ifreq ifr;
- int fanout_arg;
-
- if (fd < 0) {
- perror("socket");
- return EXIT_FAILURE;
- }
-
- memset(&ifr, 0, sizeof(ifr));
- strcpy(ifr.ifr_name, device_name);
- err = ioctl(fd, SIOCGIFINDEX, &ifr);
- if (err < 0) {
- perror("SIOCGIFINDEX");
- return EXIT_FAILURE;
- }
-
- memset(&ll, 0, sizeof(ll));
- ll.sll_family = AF_PACKET;
- ll.sll_ifindex = ifr.ifr_ifindex;
- err = bind(fd, (struct sockaddr *) &ll, sizeof(ll));
- if (err < 0) {
- perror("bind");
- return EXIT_FAILURE;
- }
-
- fanout_arg = (fanout_id | (fanout_type << 16));
- err = setsockopt(fd, SOL_PACKET, PACKET_FANOUT,
- &fanout_arg, sizeof(fanout_arg));
- if (err) {
- perror("setsockopt");
- return EXIT_FAILURE;
- }
-
- return fd;
-}
-
-static void fanout_thread(void)
-{
- int fd = setup_socket();
- int limit = 10000;
-
- if (fd < 0)
- exit(fd);
-
- while (limit-- > 0) {
- char buf[1600];
- int err;
-
- err = read(fd, buf, sizeof(buf));
- if (err < 0) {
- perror("read");
- exit(EXIT_FAILURE);
- }
- if ((limit % 10) == 0)
- fprintf(stdout, "(%d) \n", getpid());
- }
-
- fprintf(stdout, "%d: Received 10000 packets\n", getpid());
-
- close(fd);
- exit(0);
-}
-
-int main(int argc, char **argp)
-{
- int fd, err;
- int i;
-
- if (argc != 3) {
- fprintf(stderr, "Usage: %s INTERFACE {hash|lb}\n", argp[0]);
- return EXIT_FAILURE;
- }
-
- if (!strcmp(argp[2], "hash"))
- fanout_type = PACKET_FANOUT_HASH;
- else if (!strcmp(argp[2], "lb"))
- fanout_type = PACKET_FANOUT_LB;
- else {
- fprintf(stderr, "Unknown fanout type [%s]\n", argp[2]);
- exit(EXIT_FAILURE);
- }
-
- device_name = argp[1];
- fanout_id = getpid() & 0xffff;
-
- for (i = 0; i < 4; i++) {
- pid_t pid = fork();
-
- switch (pid) {
- case 0:
- fanout_thread();
-
- case -1:
- perror("fork");
- exit(EXIT_FAILURE);
- }
- }
-
- for (i = 0; i < 4; i++) {
- int status;
-
- wait(&status);
- }
-
- return 0;
-}
-
--------------------------------------------------------------------------------
-+ AF_PACKET TPACKET_V3 example
--------------------------------------------------------------------------------
-
-AF_PACKET's TPACKET_V3 ring buffer can be configured to use non-static frame
-sizes by doing it's own memory management. It is based on blocks where polling
-works on a per block basis instead of per ring as in TPACKET_V2 and predecessor.
-
-It is said that TPACKET_V3 brings the following benefits:
- *) ~15 - 20% reduction in CPU-usage
- *) ~20% increase in packet capture rate
- *) ~2x increase in packet density
- *) Port aggregation analysis
- *) Non static frame size to capture entire packet payload
-
-So it seems to be a good candidate to be used with packet fanout.
-
-Minimal example code by Daniel Borkmann based on Chetan Loke's lolpcap (compile
-it with gcc -Wall -O2 blob.c, and try things like "./a.out eth0", etc.):
-
-/* Written from scratch, but kernel-to-user space API usage
- * dissected from lolpcap:
- * Copyright 2011, Chetan Loke <loke.chetan@xxxxxxxxx>
- * License: GPL, version 2.0
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <stdint.h>
-#include <string.h>
-#include <assert.h>
-#include <net/if.h>
-#include <arpa/inet.h>
-#include <netdb.h>
-#include <poll.h>
-#include <unistd.h>
-#include <signal.h>
-#include <inttypes.h>
-#include <sys/socket.h>
-#include <sys/mman.h>
-#include <linux/if_packet.h>
-#include <linux/if_ether.h>
-#include <linux/ip.h>
-
-#ifndef likely
-# define likely(x) __builtin_expect(!!(x), 1)
-#endif
-#ifndef unlikely
-# define unlikely(x) __builtin_expect(!!(x), 0)
-#endif
-
-struct block_desc {
- uint32_t version;
- uint32_t offset_to_priv;
- struct tpacket_hdr_v1 h1;
-};
-
-struct ring {
- struct iovec *rd;
- uint8_t *map;
- struct tpacket_req3 req;
-};
-
-static unsigned long packets_total = 0, bytes_total = 0;
-static sig_atomic_t sigint = 0;
-
-static void sighandler(int num)
-{
- sigint = 1;
-}
-
-static int setup_socket(struct ring *ring, char *netdev)
-{
- int err, i, fd, v = TPACKET_V3;
- struct sockaddr_ll ll;
- unsigned int blocksiz = 1 << 22, framesiz = 1 << 11;
- unsigned int blocknum = 64;
-
- fd = socket(AF_PACKET, SOCK_RAW, htons(ETH_P_ALL));
- if (fd < 0) {
- perror("socket");
- exit(1);
- }
-
- err = setsockopt(fd, SOL_PACKET, PACKET_VERSION, &v, sizeof(v));
- if (err < 0) {
- perror("setsockopt");
- exit(1);
- }
-
- memset(&ring->req, 0, sizeof(ring->req));
- ring->req.tp_block_size = blocksiz;
- ring->req.tp_frame_size = framesiz;
- ring->req.tp_block_nr = blocknum;
- ring->req.tp_frame_nr = (blocksiz * blocknum) / framesiz;
- ring->req.tp_retire_blk_tov = 60;
- ring->req.tp_feature_req_word = TP_FT_REQ_FILL_RXHASH;
-
- err = setsockopt(fd, SOL_PACKET, PACKET_RX_RING, &ring->req,
- sizeof(ring->req));
- if (err < 0) {
- perror("setsockopt");
- exit(1);
- }
-
- ring->map = mmap(NULL, ring->req.tp_block_size * ring->req.tp_block_nr,
- PROT_READ | PROT_WRITE, MAP_SHARED | MAP_LOCKED, fd, 0);
- if (ring->map == MAP_FAILED) {
- perror("mmap");
- exit(1);
- }
-
- ring->rd = malloc(ring->req.tp_block_nr * sizeof(*ring->rd));
- assert(ring->rd);
- for (i = 0; i < ring->req.tp_block_nr; ++i) {
- ring->rd[i].iov_base = ring->map + (i * ring->req.tp_block_size);
- ring->rd[i].iov_len = ring->req.tp_block_size;
- }
-
- memset(&ll, 0, sizeof(ll));
- ll.sll_family = PF_PACKET;
- ll.sll_protocol = htons(ETH_P_ALL);
- ll.sll_ifindex = if_nametoindex(netdev);
- ll.sll_hatype = 0;
- ll.sll_pkttype = 0;
- ll.sll_halen = 0;
-
- err = bind(fd, (struct sockaddr *) &ll, sizeof(ll));
- if (err < 0) {
- perror("bind");
- exit(1);
- }
-
- return fd;
-}
-
-static void display(struct tpacket3_hdr *ppd)
-{
- struct ethhdr *eth = (struct ethhdr *) ((uint8_t *) ppd + ppd->tp_mac);
- struct iphdr *ip = (struct iphdr *) ((uint8_t *) eth + ETH_HLEN);
-
- if (eth->h_proto == htons(ETH_P_IP)) {
- struct sockaddr_in ss, sd;
- char sbuff[NI_MAXHOST], dbuff[NI_MAXHOST];
-
- memset(&ss, 0, sizeof(ss));
- ss.sin_family = PF_INET;
- ss.sin_addr.s_addr = ip->saddr;
- getnameinfo((struct sockaddr *) &ss, sizeof(ss),
- sbuff, sizeof(sbuff), NULL, 0, NI_NUMERICHOST);
-
- memset(&sd, 0, sizeof(sd));
- sd.sin_family = PF_INET;
- sd.sin_addr.s_addr = ip->daddr;
- getnameinfo((struct sockaddr *) &sd, sizeof(sd),
- dbuff, sizeof(dbuff), NULL, 0, NI_NUMERICHOST);
-
- printf("%s -> %s, ", sbuff, dbuff);
- }
-
- printf("rxhash: 0x%x\n", ppd->hv1.tp_rxhash);
-}
-
-static void walk_block(struct block_desc *pbd, const int block_num)
-{
- int num_pkts = pbd->h1.num_pkts, i;
- unsigned long bytes = 0;
- struct tpacket3_hdr *ppd;
-
- ppd = (struct tpacket3_hdr *) ((uint8_t *) pbd +
- pbd->h1.offset_to_first_pkt);
- for (i = 0; i < num_pkts; ++i) {
- bytes += ppd->tp_snaplen;
- display(ppd);
-
- ppd = (struct tpacket3_hdr *) ((uint8_t *) ppd +
- ppd->tp_next_offset);
- }
-
- packets_total += num_pkts;
- bytes_total += bytes;
-}
-
-static void flush_block(struct block_desc *pbd)
-{
- pbd->h1.block_status = TP_STATUS_KERNEL;
-}
-
-static void teardown_socket(struct ring *ring, int fd)
-{
- munmap(ring->map, ring->req.tp_block_size * ring->req.tp_block_nr);
- free(ring->rd);
- close(fd);
-}
-
-int main(int argc, char **argp)
-{
- int fd, err;
- socklen_t len;
- struct ring ring;
- struct pollfd pfd;
- unsigned int block_num = 0, blocks = 64;
- struct block_desc *pbd;
- struct tpacket_stats_v3 stats;
-
- if (argc != 2) {
- fprintf(stderr, "Usage: %s INTERFACE\n", argp[0]);
- return EXIT_FAILURE;
- }
-
- signal(SIGINT, sighandler);
-
- memset(&ring, 0, sizeof(ring));
- fd = setup_socket(&ring, argp[argc - 1]);
- assert(fd > 0);
-
- memset(&pfd, 0, sizeof(pfd));
- pfd.fd = fd;
- pfd.events = POLLIN | POLLERR;
- pfd.revents = 0;
-
- while (likely(!sigint)) {
- pbd = (struct block_desc *) ring.rd[block_num].iov_base;
-
- if ((pbd->h1.block_status & TP_STATUS_USER) == 0) {
- poll(&pfd, 1, -1);
- continue;
- }
-
- walk_block(pbd, block_num);
- flush_block(pbd);
- block_num = (block_num + 1) % blocks;
- }
-
- len = sizeof(stats);
- err = getsockopt(fd, SOL_PACKET, PACKET_STATISTICS, &stats, &len);
- if (err < 0) {
- perror("getsockopt");
- exit(1);
- }
-
- fflush(stdout);
- printf("\nReceived %u packets, %lu bytes, %u dropped, freeze_q_cnt: %u\n",
- stats.tp_packets, bytes_total, stats.tp_drops,
- stats.tp_freeze_q_cnt);
-
- teardown_socket(&ring, fd);
- return 0;
-}
-
--------------------------------------------------------------------------------
-+ PACKET_QDISC_BYPASS
--------------------------------------------------------------------------------
-
-If there is a requirement to load the network with many packets in a similar
-fashion as pktgen does, you might set the following option after socket
-creation:
-
- int one = 1;
- setsockopt(fd, SOL_PACKET, PACKET_QDISC_BYPASS, &one, sizeof(one));
-
-This has the side-effect, that packets sent through PF_PACKET will bypass the
-kernel's qdisc layer and are forcedly pushed to the driver directly. Meaning,
-packet are not buffered, tc disciplines are ignored, increased loss can occur
-and such packets are also not visible to other PF_PACKET sockets anymore. So,
-you have been warned; generally, this can be useful for stress testing various
-components of a system.
-
-On default, PACKET_QDISC_BYPASS is disabled and needs to be explicitly enabled
-on PF_PACKET sockets.
-
--------------------------------------------------------------------------------
-+ PACKET_TIMESTAMP
--------------------------------------------------------------------------------
-
-The PACKET_TIMESTAMP setting determines the source of the timestamp in
-the packet meta information for mmap(2)ed RX_RING and TX_RINGs. If your
-NIC is capable of timestamping packets in hardware, you can request those
-hardware timestamps to be used. Note: you may need to enable the generation
-of hardware timestamps with SIOCSHWTSTAMP (see related information from
-Documentation/networking/timestamping.txt).
-
-PACKET_TIMESTAMP accepts the same integer bit field as SO_TIMESTAMPING:
-
- int req = SOF_TIMESTAMPING_RAW_HARDWARE;
- setsockopt(fd, SOL_PACKET, PACKET_TIMESTAMP, (void *) &req, sizeof(req))
-
-For the mmap(2)ed ring buffers, such timestamps are stored in the
-tpacket{,2,3}_hdr structure's tp_sec and tp_{n,u}sec members. To determine
-what kind of timestamp has been reported, the tp_status field is binary |'ed
-with the following possible bits ...
-
- TP_STATUS_TS_RAW_HARDWARE
- TP_STATUS_TS_SOFTWARE
-
-... that are equivalent to its SOF_TIMESTAMPING_* counterparts. For the
-RX_RING, if neither is set (i.e. PACKET_TIMESTAMP is not set), then a
-software fallback was invoked *within* PF_PACKET's processing code (less
-precise).
-
-Getting timestamps for the TX_RING works as follows: i) fill the ring frames,
-ii) call sendto() e.g. in blocking mode, iii) wait for status of relevant
-frames to be updated resp. the frame handed over to the application, iv) walk
-through the frames to pick up the individual hw/sw timestamps.
-
-Only (!) if transmit timestamping is enabled, then these bits are combined
-with binary | with TP_STATUS_AVAILABLE, so you must check for that in your
-application (e.g. !(tp_status & (TP_STATUS_SEND_REQUEST | TP_STATUS_SENDING))
-in a first step to see if the frame belongs to the application, and then
-one can extract the type of timestamp in a second step from tp_status)!
-
-If you don't care about them, thus having it disabled, checking for
-TP_STATUS_AVAILABLE resp. TP_STATUS_WRONG_FORMAT is sufficient. If in the
-TX_RING part only TP_STATUS_AVAILABLE is set, then the tp_sec and tp_{n,u}sec
-members do not contain a valid value. For TX_RINGs, by default no timestamp
-is generated!
-
-See include/linux/net_tstamp.h and Documentation/networking/timestamping.txt
-for more information on hardware timestamps.
-
--------------------------------------------------------------------------------
-+ Miscellaneous bits
--------------------------------------------------------------------------------
-
-- Packet sockets work well together with Linux socket filters, thus you also
- might want to have a look at Documentation/networking/filter.rst
-
---------------------------------------------------------------------------------
-+ THANKS
---------------------------------------------------------------------------------
-
- Jesse Brandeburg, for fixing my grammathical/spelling errors
-
--
2.25.4