[RFC PATCH v11 5/9] dt-binding: tegra: Add VI and CSI bindings

From: Sowjanya Komatineni
Date: Wed Apr 29 2020 - 18:01:55 EST


Tegra contains VI controller which can support up to 6 MIPI CSI
camera sensors.

Each Tegra CSI port from CSI unit can be one-to-one mapper to
VI channel and can capture from an external camera sensor or
from built-in test pattern generator.

This patch adds dt-bindings for Tegra VI and CSI.

Acked-by: Thierry Reding <treding@xxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
---
.../display/tegra/nvidia,tegra20-host1x.txt | 73 ++++++++++++++++++----
1 file changed, 60 insertions(+), 13 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
index 9999255..4731921 100644
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
@@ -40,14 +40,30 @@ of the following host1x client modules:

Required properties:
- compatible: "nvidia,tegra<chip>-vi"
- - reg: Physical base address and length of the controller's registers.
+ - reg: Physical base address and length of the controller registers.
- interrupts: The interrupt outputs from the controller.
- - clocks: Must contain one entry, for the module clock.
+ - clocks: clocks: Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
- - resets: Must contain an entry for each entry in reset-names.
- See ../reset/reset.txt for details.
- - reset-names: Must include the following entries:
- - vi
+ - Tegra20/Tegra30/Tegra114/Tegra124:
+ - resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+ - reset-names: Must include the following entries:
+ - vi
+ - Tegra210:
+ - power-domains: Must include venc powergate node as vi is in VE partition.
+ - Tegra210 has CSI part of VI sharing same host interface and register space.
+ So, VI device node should have CSI child node.
+
+ - csi: mipi csi interface to vi
+
+ Required properties:
+ - compatible: "nvidia,tegra210-csi"
+ - reg: Physical base address offset to parent and length of the controller
+ registers.
+ - clocks: Must contain entries csi, cilab, cilcd, cile, csi_tpg clocks.
+ See ../clocks/clock-bindings.txt for details.
+ - power-domains: Must include sor powergate node as csicil is in
+ SOR partition.

- epp: encoder pre-processor

@@ -309,13 +325,44 @@ Example:
reset-names = "mpe";
};

- vi {
- compatible = "nvidia,tegra20-vi";
- reg = <0x54080000 0x00040000>;
- interrupts = <0 69 0x04>;
- clocks = <&tegra_car TEGRA20_CLK_VI>;
- resets = <&tegra_car 100>;
- reset-names = "vi";
+ vi@54080000 {
+ compatible = "nvidia,tegra210-vi";
+ reg = <0x0 0x54080000 0x0 0x700>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ assigned-clocks = <&tegra_car TEGRA210_CLK_VI>;
+ assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
+
+ clocks = <&tegra_car TEGRA210_CLK_VI>;
+ power-domains = <&pd_venc>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ranges = <0x0 0x0 0x54080000 0x2000>;
+
+ csi@838 {
+ compatible = "nvidia,tegra210-csi";
+ reg = <0x838 0x1300>;
+ assigned-clocks = <&tegra_car TEGRA210_CLK_CILAB>,
+ <&tegra_car TEGRA210_CLK_CILCD>,
+ <&tegra_car TEGRA210_CLK_CILE>,
+ <&tegra_car TEGRA210_CLK_CSI_TPG>;
+ assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_P>,
+ <&tegra_car TEGRA210_CLK_PLL_P>,
+ <&tegra_car TEGRA210_CLK_PLL_P>;
+ assigned-clock-rates = <102000000>,
+ <102000000>,
+ <102000000>,
+ <972000000>;
+
+ clocks = <&tegra_car TEGRA210_CLK_CSI>,
+ <&tegra_car TEGRA210_CLK_CILAB>,
+ <&tegra_car TEGRA210_CLK_CILCD>,
+ <&tegra_car TEGRA210_CLK_CILE>,
+ <&tegra_car TEGRA210_CLK_CSI_TPG>;
+ clock-names = "csi", "cilab", "cilcd", "cile", "csi_tpg";
+ power-domains = <&pd_sor>;
+ };
};

epp {
--
2.7.4