Re: [PATCH v2 1/8] bus: mhi: core: Cache intmod from mhi event to mhi channel

From: Hemant Kumar
Date: Wed Apr 29 2020 - 13:27:47 EST


Hi Jeff

On 4/28/20 7:39 AM, Jeffrey Hugo wrote:
On 4/27/2020 8:59 PM, Bhaumik Bhatt wrote:
From: Hemant Kumar <hemantk@xxxxxxxxxxxxxx>

Driver is using zero initialized intmod value from mhi channel when
configuring TRE for bei field. This prevents interrupt moderation to
take effect in case it is supported by an event ring. Fix this by
copying intmod value from associated event ring to mhi channel upon
registering mhi controller.

Signed-off-by: Hemant Kumar <hemantk@xxxxxxxxxxxxxx>
Signed-off-by: Bhaumik Bhatt <bbhatt@xxxxxxxxxxxxxx>
---
 drivers/bus/mhi/core/init.c | 4 ++++
 drivers/bus/mhi/core/main.c | 9 ++++++---
 2 files changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/bus/mhi/core/init.c b/drivers/bus/mhi/core/init.c
index b38359c..4dc7f22 100644
--- a/drivers/bus/mhi/core/init.c
+++ b/drivers/bus/mhi/core/init.c
@@ -864,6 +864,10 @@ int mhi_register_controller(struct mhi_controller *mhi_cntrl,
ÂÂÂÂÂÂÂÂÂ mutex_init(&mhi_chan->mutex);
ÂÂÂÂÂÂÂÂÂ init_completion(&mhi_chan->completion);
ÂÂÂÂÂÂÂÂÂ rwlock_init(&mhi_chan->lock);
+
+ÂÂÂÂÂÂÂ /* used in setting bei field of TRE */
+ÂÂÂÂÂÂÂ mhi_event = &mhi_cntrl->mhi_event[mhi_chan->er_index];
+ÂÂÂÂÂÂÂ mhi_chan->intmod = mhi_event->intmod;
ÂÂÂÂÂ }
ÂÂÂÂÂ if (mhi_cntrl->bounce_buf) {
diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
index eb4256b..23154f1 100644
--- a/drivers/bus/mhi/core/main.c
+++ b/drivers/bus/mhi/core/main.c
@@ -929,7 +929,7 @@ int mhi_queue_skb(struct mhi_device *mhi_dev, enum dma_data_direction dir,
ÂÂÂÂÂ struct mhi_ring *buf_ring = &mhi_chan->buf_ring;
ÂÂÂÂÂ struct mhi_buf_info *buf_info;
ÂÂÂÂÂ struct mhi_tre *mhi_tre;
-ÂÂÂ int ret;
+ÂÂÂ int ret, bei;
ÂÂÂÂÂ /* If MHI host pre-allocates buffers then client drivers cannot queue */
ÂÂÂÂÂ if (mhi_chan->pre_alloc)
@@ -966,10 +966,11 @@ int mhi_queue_skb(struct mhi_device *mhi_dev, enum dma_data_direction dir,
ÂÂÂÂÂÂÂÂÂ goto map_error;
ÂÂÂÂÂ mhi_tre = tre_ring->wp;
+ÂÂÂ bei = !!(mhi_chan->intmod);
ÂÂÂÂÂ mhi_tre->ptr = MHI_TRE_DATA_PTR(buf_info->p_addr);
ÂÂÂÂÂ mhi_tre->dword[0] = MHI_TRE_DATA_DWORD0(buf_info->len);
-ÂÂÂ mhi_tre->dword[1] = MHI_TRE_DATA_DWORD1(1, 1, 0, 0);
+ÂÂÂ mhi_tre->dword[1] = MHI_TRE_DATA_DWORD1(bei, 1, 0, 0);

Why are we not using mhi_gen_tre() here? Its used in mhi_queue_buf(), which seems to be why the issue doesn't appear there. It looks like we have 3 instances of the same code, which all need to be kept in sync. Seems like this bug exists because they were not in sync.

Simplifying the code by removing the duplication seems to be the better approach by not only addressing this issue, but also preventing future ones.

Agree, i came up with a re-factor change to have all queue APIs calling
mhi_gen_tre(). Will include as part of V3.
ÂÂÂÂÂ /* increment WP */
ÂÂÂÂÂ mhi_add_ring_element(mhi_cntrl, tre_ring);
@@ -1006,6 +1007,7 @@ int mhi_queue_dma(struct mhi_device *mhi_dev, enum dma_data_direction dir,
ÂÂÂÂÂ struct mhi_ring *buf_ring = &mhi_chan->buf_ring;
ÂÂÂÂÂ struct mhi_buf_info *buf_info;
ÂÂÂÂÂ struct mhi_tre *mhi_tre;
+ÂÂÂ int bei;
ÂÂÂÂÂ /* If MHI host pre-allocates buffers then client drivers cannot queue */
ÂÂÂÂÂ if (mhi_chan->pre_alloc)
@@ -1043,10 +1045,11 @@ int mhi_queue_dma(struct mhi_device *mhi_dev, enum dma_data_direction dir,
ÂÂÂÂÂ buf_info->len = len;
ÂÂÂÂÂ mhi_tre = tre_ring->wp;
+ÂÂÂ bei = !!(mhi_chan->intmod);
ÂÂÂÂÂ mhi_tre->ptr = MHI_TRE_DATA_PTR(buf_info->p_addr);
ÂÂÂÂÂ mhi_tre->dword[0] = MHI_TRE_DATA_DWORD0(buf_info->len);
-ÂÂÂ mhi_tre->dword[1] = MHI_TRE_DATA_DWORD1(1, 1, 0, 0);
+ÂÂÂ mhi_tre->dword[1] = MHI_TRE_DATA_DWORD1(bei, 1, 0, 0);
ÂÂÂÂÂ /* increment WP */
ÂÂÂÂÂ mhi_add_ring_element(mhi_cntrl, tre_ring);




--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project