[PATCH 2/2] arm: dts: stm32f769-disco: Enable MIPI DSI display support

From: Adrian Pop
Date: Fri Apr 24 2020 - 14:21:44 EST


STM32f769-disco features a 4" MIPI DSI display: add support for it.

Signed-off-by: Adrian Pop <pop.adrian61@xxxxxxxxx>
---
arch/arm/boot/dts/stm32f746.dtsi | 34 ++++++++++++++++++
arch/arm/boot/dts/stm32f769-disco.dts | 50 +++++++++++++++++++++++++++
2 files changed, 84 insertions(+)

diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
index 93c063796780..202bb6edc9f1 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -48,6 +48,19 @@ / {
#address-cells = <1>;
#size-cells = <1>;

+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ linux,dma {
+ compatible = "shared-dma-pool";
+ linux,dma-default;
+ no-map;
+ size = <0x10F000>;
+ };
+ };
+
clocks {
clk_hse: clk-hse {
#clock-cells = <0>;
@@ -75,6 +88,27 @@ clk_i2s_ckin: clk-i2s-ckin {
};

soc {
+ ltdc: display-controller@40016800 {
+ compatible = "st,stm32-ltdc";
+ reg = <0x40016800 0x200>;
+ interrupts = <88>, <89>;
+ resets = <&rcc STM32F7_APB2_RESET(LTDC)>;
+ clocks = <&rcc 1 CLK_LCD>;
+ clock-names = "lcd";
+ status = "disabled";
+ };
+
+ dsi: dsi@40016c00 {
+ compatible = "st,stm32-dsi";
+ reg = <0x40016c00 0x800>;
+ interrupts = <98>;
+ clocks = <&rcc 1 CLK_F769_DSI>, <&clk_hse>;
+ clock-names = "pclk", "ref";
+ resets = <&rcc STM32F7_APB2_RESET(DSI)>;
+ reset-names = "apb";
+ status = "disabled";
+ };
+
timer2: timer@40000000 {
compatible = "st,stm32-timer";
reg = <0x40000000 0x400>;
diff --git a/arch/arm/boot/dts/stm32f769-disco.dts b/arch/arm/boot/dts/stm32f769-disco.dts
index 1626e00bb2cb..30ebbc193e82 100644
--- a/arch/arm/boot/dts/stm32f769-disco.dts
+++ b/arch/arm/boot/dts/stm32f769-disco.dts
@@ -153,3 +153,53 @@ &usbotg_hs {
pinctrl-names = "default";
status = "okay";
};
+
+&dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi_in: endpoint {
+ remote-endpoint = <&ltdc_out_dsi>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi_out: endpoint {
+ remote-endpoint = <&dsi_in_panel>;
+ };
+ };
+
+ };
+
+ panel: panel {
+ compatible = "orisetech,otm8009a";
+ reg = <0>; /* dsi virtual channel (0..3) */
+ reset-gpios = <&gpioj 15 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ port {
+ dsi_in_panel: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+};
+
+&ltdc {
+ dma-ranges;
+ status = "okay";
+
+ port {
+ ltdc_out_dsi: endpoint {
+ remote-endpoint = <&dsi_in>;
+ };
+ };
+};
--
2.26.2