[PATCH v2 6/9] clocksource/drivers/timer-atmel-tcb: fill tcb_config

From: Alexandre Belloni
Date: Wed Apr 15 2020 - 05:54:41 EST


Use the tcb_config and struct atmel_tcb_config to get the timer counter
width. This is necessary because atmel_tcb_config will be extended later
on.

Signed-off-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
---
drivers/clocksource/timer-atmel-tcb.c | 18 +++++++++++++++---
1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/drivers/clocksource/timer-atmel-tcb.c b/drivers/clocksource/timer-atmel-tcb.c
index b255a4a1a36b..423af2f9835f 100644
--- a/drivers/clocksource/timer-atmel-tcb.c
+++ b/drivers/clocksource/timer-atmel-tcb.c
@@ -348,9 +348,17 @@ static void __init tcb_setup_single_chan(struct atmel_tc *tc, int mck_divisor_id

static const u8 atmel_tcb_divisors[] = { 2, 8, 32, 128 };

+static struct atmel_tcb_config tcb_rm9200_config = {
+ .counter_width = 16,
+};
+
+static struct atmel_tcb_config tcb_sam9x5_config = {
+ .counter_width = 32,
+};
+
static const struct of_device_id atmel_tcb_of_match[] = {
- { .compatible = "atmel,at91rm9200-tcb", .data = (void *)16, },
- { .compatible = "atmel,at91sam9x5-tcb", .data = (void *)32, },
+ { .compatible = "atmel,at91rm9200-tcb", .data = &tcb_rm9200_config, },
+ { .compatible = "atmel,at91sam9x5-tcb", .data = &tcb_sam9x5_config, },
{ /* sentinel */ }
};

@@ -398,7 +406,11 @@ static int __init tcb_clksrc_init(struct device_node *node)
}

match = of_match_node(atmel_tcb_of_match, node->parent);
- bits = (uintptr_t)match->data;
+ if (!match)
+ return -ENODEV;
+
+ tc.tcb_config = match->data;
+ bits = tc.tcb_config->counter_width;

for (i = 0; i < ARRAY_SIZE(tc.irq); i++)
writel(ATMEL_TC_ALL_IRQ, tc.regs + ATMEL_TC_REG(i, IDR));
--
2.25.2