Re: [PATCH v2] drivers: counter: Add Cros EC Sync counter

From: William Breathitt Gray
Date: Tue Apr 14 2020 - 16:48:42 EST


On Mon, Apr 13, 2020 at 12:55:14PM -0700, Gwendal Grignou wrote:
> When the camera vsync pin is connected to the embedded controller (EC) of
> a chromebook, the EC reports a sensor with a counter that increases
> at each GPIO rising edge.
>
> The sensor is presented using the counter subsystem.
> In addition, it is also presented via the IIO subsystem with a timestamp,
> allowing synchronisation with sensors connected to the same EC, for
> image stabilisation or augmented reality applications.

Hi Gwendal,

Sorry for the delay. I have some changes requested below.

> To enable the counter:
> via counter ABI:
> echo "rising edge" > counterX/count0/signal_action
> via iio ABI
> echo 1 > iio:deviceY/en
>
> To disable the counter:
> via counter ABI:
> echo "none" > counterX/count0/signal_action
> via iio ABI
> echo 0 > iio:deviceY/en

Although in theory a user could manually disable the actions for a
Signal, this is a very roundabout way of actually disabling the Count.
It's better to expose an "enable" attribute to allow the users to
perform this functionality; for example:

echo 0 > counterX/count0/enable
echo 1 > counterX/count0/enable

>
> To read the current counter value:
> via counter ABI:
> cat counterX/count0/count
> via iio ABI
> cat iio:deviceY/in_count_raw

I know we discussed this in the last review but it's still the same as
before: IIO_COUNT interface is deprecated so new drivers won't be
allowed to use it. You'll have to remove the IIO_COUNT code in this
driver and replace it with Counter subsystem equivalents.

> We can also read the value through the IIO buffer:
> echo 1 > iio:deviceY/scan_elements/in_timestamp_en
> echo 1 > iio:deviceY/scan_elements/in_count_en
> echo 1 > iio:deviceY/buffer/enable
>
> and each time to counter increase, the following binary blob
> will be appended to dev/iio:deviceY:
> 000f 0000 0000 0000 dc66 816c 0071 0000
> \ <-- padding -> <-- timestamp ---->
> count
>
> Signed-off-by: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
> ---
> Changes in v2:
> - fix license.
> - remove extra unlock.
>
> drivers/counter/Kconfig | 11 +
> drivers/counter/Makefile | 1 +
> drivers/counter/cros_ec_sync.c | 332 ++++++++++++++++++
> .../cros_ec_sensors/cros_ec_sensors_core.c | 15 +
> drivers/platform/chrome/cros_ec_sensorhub.c | 3 +
> .../linux/iio/common/cros_ec_sensors_core.h | 4 +-
> 6 files changed, 365 insertions(+), 1 deletion(-)
> create mode 100644 drivers/counter/cros_ec_sync.c
>
> diff --git a/drivers/counter/Kconfig b/drivers/counter/Kconfig
> index c80fa76bb5311..18fde918ff40b 100644
> --- a/drivers/counter/Kconfig
> +++ b/drivers/counter/Kconfig
> @@ -29,6 +29,17 @@ config 104_QUAD_8
> The base port addresses for the devices may be configured via the base
> array module parameter.
>
> +config CROS_EC_SYNC
> + tristate "ChromeOS EC Counter driver"
> + depends on IIO_CROS_EC_SENSORS_CORE
> + help
> + Module to handle synchronisation sensor presented by the ChromeOS EC
> + Sensor hub.
> + Synchronisation sensor sends event to the host when the camera
> + take a picture. It allows synchronisation with other MEMS sensor,
> + like gyroscope for image statbilization or augmented reality
> + application (AR).
> +
> config STM32_TIMER_CNT
> tristate "STM32 Timer encoder counter driver"
> depends on MFD_STM32_TIMERS || COMPILE_TEST
> diff --git a/drivers/counter/Makefile b/drivers/counter/Makefile
> index 55142d1f4c436..98378fca50ad6 100644
> --- a/drivers/counter/Makefile
> +++ b/drivers/counter/Makefile
> @@ -6,6 +6,7 @@
> obj-$(CONFIG_COUNTER) += counter.o
>
> obj-$(CONFIG_104_QUAD_8) += 104-quad-8.o
> +obj-$(CONFIG_CROS_EC_SYNC) += cros_ec_sync.o
> obj-$(CONFIG_STM32_TIMER_CNT) += stm32-timer-cnt.o
> obj-$(CONFIG_STM32_LPTIMER_CNT) += stm32-lptimer-cnt.o
> obj-$(CONFIG_TI_EQEP) += ti-eqep.o
> diff --git a/drivers/counter/cros_ec_sync.c b/drivers/counter/cros_ec_sync.c
> new file mode 100644
> index 0000000000000..4e644d651fde6
> --- /dev/null
> +++ b/drivers/counter/cros_ec_sync.c
> @@ -0,0 +1,332 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Driver for synchronisation sensor behind CrOS EC.
> + *
> + * Copyright 2020 Google LLC.
> + *
> + * This driver uses the cros-ec interface to communicate with the Chrome OS
> + * EC about counter sensors. Counters are presented through
> + * iio sysfs.
> + */
> +
> +#include <linux/counter.h>
> +#include <linux/device.h>
> +#include <linux/iio/buffer.h>
> +#include <linux/iio/common/cros_ec_sensors_core.h>
> +#include <linux/iio/iio.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +
> +/*
> + * One channel for counter, the other for timestamp.
> + */
> +#define MAX_CHANNELS (1 + 1)
> +
> +/**
> + * struct cros_ec_sync_state - device structure
> + *
> + * @core: common structure for all cros_ec sensor.
> + * Must be at the beggining.
> + * @channels: presented iio channels(2).
> + * @counter: counter data structure.
> + */
> +struct cros_ec_sync_state {
> + struct cros_ec_sensors_core_state core;
> + struct iio_chan_spec channels[MAX_CHANNELS];
> + struct counter_device counter;
> +};
> +
> +/**
> + * cros_ec_sync_get_enable() - Check if the counter is enabled.
> + *
> + * @st: core cros_ec sensor
> + * @val: status: 0: disabled, 1 enabled.
> + *
> + * Return: 0 on success, -errno on failure.
> + */
> +static int cros_ec_sync_get_enable(struct cros_ec_sensors_core_state *st,
> + int *val)
> +{
> + int ret;
> +
> + mutex_lock(&st->cmd_lock);
> + st->param.cmd = MOTIONSENSE_CMD_SENSOR_ODR;
> + st->param.sensor_odr.data = EC_MOTION_SENSE_NO_VALUE;
> +
> + ret = cros_ec_motion_send_host_cmd(st, 0);
> + mutex_unlock(&st->cmd_lock);
> + if (ret)
> + return ret;
> +
> + *val = !!st->resp->sensor_odr.ret;
> + return 0;
> +}
> +
> +/**
> + * cros_ec_sync_set_enable() - Allow the counter to count.
> + *
> + * When enable, the counter will increase for each VSYNC rising edge
> + * and will produce an event in the iio buffer, if enabled.
> + *
> + * @st: core cros_ec sensor
> + * @val: 0: disable, 1 enable.
> + *
> + * Return: 0 on success, -errno on failure.
> + */
> +static int cros_ec_sync_set_enable(struct cros_ec_sensors_core_state *st,
> + int val)
> +{
> + int ret;
> +
> + mutex_lock(&st->cmd_lock);
> + st->param.cmd = MOTIONSENSE_CMD_SENSOR_ODR;
> + st->param.sensor_odr.data = val;
> + st->param.sensor_odr.roundup = 1;
> +
> + ret = cros_ec_motion_send_host_cmd(st, 0);
> + mutex_unlock(&st->cmd_lock);
> + return ret;
> +}
> +
> +static int cros_ec_sync_iio_read(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int *val, int *val2, long mask)
> +{
> + struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
> + u16 data;
> + int ret;
> + int idx = chan->scan_index;
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_RAW:
> + mutex_lock(&st->cmd_lock);
> + ret = cros_ec_sensors_read_cmd(indio_dev, 1 << idx, &data);
> + mutex_unlock(&st->cmd_lock);
> + if (ret < 0)
> + break;
> + ret = IIO_VAL_INT;
> + *val = data;
> + break;
> + case IIO_CHAN_INFO_ENABLE:
> + ret = cros_ec_sync_get_enable(st, val);
> + if (ret < 0)
> + break;
> + ret = IIO_VAL_INT;
> + break;
> + default:
> + ret = -EINVAL;
> + break;
> + }
> + return ret;
> +}
> +
> +static int cros_ec_sync_iio_write(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int val, int val2, long mask)
> +{
> + struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_ENABLE:
> + if (val < 0 || val > 1)
> + return -EINVAL;
> +
> + return cros_ec_sync_set_enable(st, val);
> +
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static const struct iio_info cros_ec_sync_info = {
> + .read_raw = &cros_ec_sync_iio_read,
> + .write_raw = &cros_ec_sync_iio_write,
> +};
> +
> +/* The counter can only increase, so only one function present. */
> +static enum counter_count_function cros_ec_sync_functions[] = {
> + COUNTER_COUNT_FUNCTION_INCREASE,
> +};
> +
> +/* 2 synapse actions allowed: count for each rising edge, or not. */
> +static enum counter_synapse_action cros_ec_sync_synapse_actions[] = {
> + COUNTER_SYNAPSE_ACTION_NONE,
> + COUNTER_SYNAPSE_ACTION_RISING_EDGE,
> +};
> +
> +static int cros_ec_sync_read_count(struct counter_device *counter,
> + struct counter_count *count,
> + unsigned long *val)
> +{
> + struct cros_ec_sensors_core_state *st = counter->priv;
> + u16 raw;
> + int ret;
> +
> + mutex_lock(&st->cmd_lock);
> + ret = cros_ec_sensors_read_cmd(iio_priv_to_dev(st), 1, &raw);
> + mutex_unlock(&st->cmd_lock);
> + if (ret)
> + return ret;
> +
> + *val = raw;
> + return 0;
> +}
> +
> +static int cros_ec_sync_function_get(struct counter_device *counter,
> + struct counter_count *count,
> + size_t *function)
> +{
> + *function = 0;

It's somewhat unclear at first glance which function correlates to index
position 0 here. Create an enum structure and use the enum constants to
set the index of the functions in cros_ec_sync_functions. Then you can
set *function to the corresponding enum constant here -- that should
make it clear which function is returned.

Take a look at the drivers/counter/ftm-quaddec.c file for a good example
of how it handles the function_get callback.

> + return 0;
> +}
> +
> +static int cros_ec_sync_action_get(struct counter_device *counter,
> + struct counter_count *count,
> + struct counter_synapse *synapse,
> + size_t *action)
> +{
> + struct cros_ec_sensors_core_state *st = counter->priv;
> + int ret;
> + int raw;
> +
> + ret = cros_ec_sync_get_enable(st, &raw);
> + if (ret)
> + return ret;
> +
> + *action = !!raw;

For the same reason as the function_get callback above, I'd like for
*action to be explicitly set to a respective named constant.

> + return 0;
> +}
> +
> +static int cros_ec_sync_action_set(struct counter_device *counter,
> + struct counter_count *count,
> + struct counter_synapse *synapse,
> + size_t action)
> +{
> + struct cros_ec_sensors_core_state *st = counter->priv;
> +
> + return cros_ec_sync_set_enable(st, action);
> +}
> +
> +static const struct counter_ops cros_ec_sync_ops = {
> + .count_read = cros_ec_sync_read_count,
> + .function_get = cros_ec_sync_function_get,
> + .action_get = cros_ec_sync_action_get,
> + .action_set = cros_ec_sync_action_set,

It doesn't look like setting the action is actually a feature of this
device. I'd recommend just dropping the action_set callback all together
and instead implementing an "enable" attribute for your Count to handle
that functionality.

> +};
> +
> +static struct counter_signal cros_ec_sync_signals[] = {
> + {
> + .id = 0,
> + .name = "vsync"
> + }
> +};
> +
> +static struct counter_synapse cros_ec_sync_synapses[] = {
> + {
> + .actions_list = cros_ec_sync_synapse_actions,
> + .num_actions = ARRAY_SIZE(cros_ec_sync_synapse_actions),
> + .signal = cros_ec_sync_signals
> + }
> +};
> +
> +static struct counter_count cros_ec_sync_counts[] = {
> + {
> + .id = 0,
> + .name = "vsync",
> + .functions_list = cros_ec_sync_functions,
> + .num_functions = ARRAY_SIZE(cros_ec_sync_functions),
> + .synapses = cros_ec_sync_synapses,
> + .num_synapses = ARRAY_SIZE(cros_ec_sync_synapses),
> + }
> +};
> +
> +static int cros_ec_sync_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct iio_dev *indio_dev;
> + struct cros_ec_sync_state *state;
> + struct iio_chan_spec *channel;
> + int ret;
> +
> + indio_dev = devm_iio_device_alloc(dev, sizeof(*state));
> + if (!indio_dev)
> + return -ENOMEM;
> +
> + ret = cros_ec_sensors_core_init(pdev, indio_dev, true,
> + cros_ec_sensors_capture,
> + cros_ec_sensors_push_data);
> + if (ret)
> + return ret;
> +
> + indio_dev->info = &cros_ec_sync_info;
> + state = iio_priv(indio_dev);
> +
> + /* Initialize IIO device */
> + channel = state->channels;
> +
> + /* Counter channel */
> + channel->type = IIO_COUNT;
> + channel->info_mask_separate = BIT(IIO_CHAN_INFO_RAW);
> + channel->info_mask_shared_by_all = BIT(IIO_CHAN_INFO_ENABLE);
> + channel->scan_type.realbits = CROS_EC_SENSOR_BITS;
> + channel->scan_type.storagebits = CROS_EC_SENSOR_BITS;
> + channel->scan_type.shift = 0;
> + channel->scan_index = 0;
> + channel->ext_info = cros_ec_sensors_limited_info;
> + channel->scan_type.sign = 'u';

As I mentioned earlier, this counter channel should be completely
removed. You'll need to reimplement the cros_ec_sensors_limited_info
attributes using the Counter subsystem. I'll explain this more below.

> +
> + /* Timestamp channel */
> + channel++;
> + channel->type = IIO_TIMESTAMP;
> + channel->channel = -1;
> + channel->scan_index = 1;
> + channel->scan_type.sign = 's';
> + channel->scan_type.realbits = 64;
> + channel->scan_type.storagebits = 64;
> +
> + indio_dev->channels = state->channels;
> + indio_dev->num_channels = MAX_CHANNELS;
> +
> + state->core.read_ec_sensors_data = cros_ec_sensors_read_cmd;
> +
> + /* Initialize Counter device */
> + state->counter.name = dev_name(&pdev->dev);
> + state->counter.parent = &pdev->dev;
> + state->counter.ops = &cros_ec_sync_ops;
> + state->counter.counts = cros_ec_sync_counts;
> + state->counter.num_counts = ARRAY_SIZE(cros_ec_sync_counts);
> + state->counter.signals = cros_ec_sync_signals;
> + state->counter.num_signals = ARRAY_SIZE(cros_ec_sync_signals);
> + state->counter.priv = state;
> +
> + ret = devm_iio_device_register(dev, indio_dev);
> + if (ret)
> + return ret;
> +
> + return devm_counter_register(dev, &state->counter);
> +}
> +
> +static const struct platform_device_id cros_ec_sync_ids[] = {
> + {
> + .name = "cros-ec-sync",
> + },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(platform, cros_ec_sync_ids);
> +
> +static struct platform_driver cros_ec_sync_platform_driver = {
> + .driver = {
> + .name = "cros-ec-sync",
> + },
> + .probe = cros_ec_sync_probe,
> + .id_table = cros_ec_sync_ids,
> +};
> +module_platform_driver(cros_ec_sync_platform_driver);
> +
> +MODULE_AUTHOR("Gwendal Grignou <gwendal@xxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("ChromeOS EC synchronisation sensor driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
> index c831915ca7e56..3a15094616710 100644
> --- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
> +++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
> @@ -31,6 +31,7 @@
> static char *cros_ec_loc[] = {
> [MOTIONSENSE_LOC_BASE] = "base",
> [MOTIONSENSE_LOC_LID] = "lid",
> + [MOTIONSENSE_LOC_CAMERA] = "camera",
> [MOTIONSENSE_LOC_MAX] = "unknown",
> };
>
> @@ -467,6 +468,20 @@ const struct iio_chan_spec_ext_info cros_ec_sensors_ext_info[] = {
> };
> EXPORT_SYMBOL_GPL(cros_ec_sensors_ext_info);
>
> +const struct iio_chan_spec_ext_info cros_ec_sensors_limited_info[] = {
> + {
> + .name = "id",
> + .shared = IIO_SHARED_BY_ALL,
> + .read = cros_ec_sensors_id
> + },
> + {
> + .name = "location",
> + .shared = IIO_SHARED_BY_ALL,
> + .read = cros_ec_sensors_loc
> + },
> + { },
> +};

Instead of an iio_chan_spec_ext_info structure, you can reimplement this
as a counter_count_ext structure. It'll look something like this:

const struct counter_count_ext cros_ec_sensors_limited_info[] = {
{
.name = "id",
.read = cros_ec_sensors_id
},
{
.name = "location",
.read = cros_ec_sensors_loc
},
};

Note however that cros_ec_sensors_id and cros_ec_sensors_loc will need
to match expected function format for counter_count_ext read callbacks;
that means you'll need to implement proper versions of these two
functions.

William Breathitt Gray

> +EXPORT_SYMBOL_GPL(cros_ec_sensors_limited_info);
> /**
> * cros_ec_sensors_idx_to_reg - convert index into offset in shared memory
> * @st: pointer to state information for device
> diff --git a/drivers/platform/chrome/cros_ec_sensorhub.c b/drivers/platform/chrome/cros_ec_sensorhub.c
> index b7f2c00db5e1e..e4ae0868d1e06 100644
> --- a/drivers/platform/chrome/cros_ec_sensorhub.c
> +++ b/drivers/platform/chrome/cros_ec_sensorhub.c
> @@ -106,6 +106,9 @@ static int cros_ec_sensorhub_register(struct device *dev,
> case MOTIONSENSE_TYPE_ACTIVITY:
> name = "cros-ec-activity";
> break;
> + case MOTIONSENSE_TYPE_SYNC:
> + name = "cros-ec-sync";
> + break;
> default:
> dev_warn(dev, "unknown type %d\n",
> sensorhub->resp->info.type);
> diff --git a/include/linux/iio/common/cros_ec_sensors_core.h b/include/linux/iio/common/cros_ec_sensors_core.h
> index 7bc961defa87e..e416b28cf24c7 100644
> --- a/include/linux/iio/common/cros_ec_sensors_core.h
> +++ b/include/linux/iio/common/cros_ec_sensors_core.h
> @@ -114,7 +114,9 @@ int cros_ec_sensors_core_write(struct cros_ec_sensors_core_state *st,
> struct iio_chan_spec const *chan,
> int val, int val2, long mask);
>
> -/* List of extended channel specification for all sensors */
> +/* List of extended channel specification for all sensors. */
> +extern const struct iio_chan_spec_ext_info cros_ec_sensors_limited_info[];
> +/* Add calibration to set above. */
> extern const struct iio_chan_spec_ext_info cros_ec_sensors_ext_info[];
> extern const struct attribute *cros_ec_sensor_fifo_attributes[];
>
> --
> 2.26.0.110.g2183baf09c-goog
>

Attachment: signature.asc
Description: PGP signature